Daniel Golle 81db307748 generic: net: phy: realtek: work-around hang on SerDes setup ... On some but not all devices using the RTL8221B 2.5GBit/s PHY the SerDes setup sequence may hang under some circumstances (eg. <2500M link partner present during boot). RTL8221B-VB-CG 2.5Gbps PHY (C45) mdio-bus:01: rtl822xb_config_init failed: -110 Work-around the issue by performing a hardware reset and subsequent retry of the SerDes setup, which seems to always succeed. Doing this requires moving ALDPS setup to config_init (which is anyway the better place for that) as it otherwise doesn't survive the reset. Also disable listening on MDIO address 0 which may be used by other PHYs despite being spec'ed as "broadcast address", as bus activity on address 0 may otherwise confuse the RealTek PHY for good reasons. Tested-by: Luis Mita <luis@luismita.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit c87a767801) Link: https://github.com/openwrt/openwrt/pull/17790 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2025-01-31 21:38:34 +01:00
..
backport-6.6	generic: backport pending gpio-regmap ops patch	2025-01-22 20:52:54 +01:00
files	treewide: remove THIS_MODULE assignment	2024-11-28 18:46:45 +00:00
hack-6.6	generic: refresh hack patches	2025-01-22 20:51:39 +01:00
image	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
other-files	initramfs: switch to tmpfs to fix ujail	2020-11-27 01:23:43 +00:00
pending-6.6	generic: net: phy: realtek: work-around hang on SerDes setup	2025-01-31 21:38:34 +01:00
config-6.6	generic: add missing CONFIG_LEDS_KTD202X symbol	2025-01-01 23:14:31 +01:00
config-filter	kernel: filter out compiler opts from config	2024-11-28 18:47:54 +00:00
PATCHES