mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-27 20:14:27 -04:00
57a38c8d3e
Add support for Methode euroDPU which is based on uDPU but does not have a second SFP cage, instead of which a Maxlinear G.hn IC is used. PHY mode is set to 1000Base-X despite Maxlinear IC being capable of 2500Base-X since until 5.15 support for mvebu is available trying to use 2500Base-X will cause buffer overruns for which the fix is not easily backportable. Installation instructions: 1. Boot the FIT initramfs image (openwrt-mvebu-cortexa53-methode_edpu-initramfs.itb) 2. sysupgrade using the openwrt-mvebu-cortexa53-methode_edpu-firmware.tgz Signed-off-by: Robert Marko <robert.marko@sartura.hr>
76 lines
1.9 KiB
Plaintext
76 lines
1.9 KiB
Plaintext
#
|
|
# Copyright (C) 2014-2016 OpenWrt.org
|
|
# Copyright (C) 2016 LEDE-Project.org
|
|
#
|
|
|
|
[ -e /etc/config/ubootenv ] && exit 0
|
|
|
|
touch /etc/config/ubootenv
|
|
|
|
. /lib/uboot-envtools.sh
|
|
. /lib/functions.sh
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
buffalo,ls421de)
|
|
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000"
|
|
;;
|
|
cznic,turris-omnia)
|
|
idx="$(find_mtd_index u-boot-env)"
|
|
if [ -n "$idx" ]; then
|
|
ubootenv_add_uci_config "/dev/mtd${idx}" "0x0" "0x10000" "0x10000"
|
|
elif grep -q 'U-Boot 2015.10-rc2' /dev/mtd0; then
|
|
ubootenv_add_uci_config "/dev/mtd0" "0xc0000" "0x10000" "0x40000"
|
|
else
|
|
ubootenv_add_uci_config "/dev/mtd0" "0xf0000" "0x10000" "0x10000"
|
|
fi
|
|
;;
|
|
glinet,gl-mv1000)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x8000" "1"
|
|
;;
|
|
globalscale,espressobin|\
|
|
globalscale,espressobin-emmc|\
|
|
globalscale,espressobin-ultra|\
|
|
globalscale,espressobin-v7|\
|
|
globalscale,espressobin-v7-emmc|\
|
|
globalscale,mochabin)
|
|
idx="$(find_mtd_index u-boot-env)"
|
|
if [ -n "$idx" ]; then
|
|
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000" "1"
|
|
else
|
|
ubootenv_add_uci_config "/dev/mtd0" "0x3f0000" "0x10000" "0x10000" "1"
|
|
fi
|
|
;;
|
|
marvell,armada8040-mcbin-doubleshot|\
|
|
marvell,armada8040-mcbin-singleshot)
|
|
ubootenv_add_uci_config "/dev/mtd0" "0x3f0000" "0x10000" "0x10000" "1"
|
|
;;
|
|
linksys,wrt1200ac|\
|
|
linksys,wrt1900ac-v2|\
|
|
linksys,wrt1900acs)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x40000"
|
|
;;
|
|
linksys,wrt1900ac-v1)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
|
|
;;
|
|
linksys,wrt3200acm|\
|
|
linksys,wrt32x)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
|
;;
|
|
methode,udpu|\
|
|
methode,edpu)
|
|
idx="$(find_mtd_index u-boot-env)"
|
|
if [ -n "$idx" ]; then
|
|
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000" "1"
|
|
else
|
|
ubootenv_add_uci_config "/dev/mtd0" "0x180000" "0x10000" "0x10000"
|
|
fi
|
|
;;
|
|
esac
|
|
|
|
config_load ubootenv
|
|
config_foreach ubootenv_add_app_config ubootenv
|
|
|
|
exit 0
|