openwrt-mirror/package/boot
Fil Dunsky d47f6a365f mediatek: filogic: add support for Huasifei WH3000
**Huasifei WH3000 eMMC / Fudy MT3000**
Portable Wi-Fi 6 travel router based on MediaTek MT7981A SoC.
MT7981B+MT7976CN+RTL8221B Dual Core 1.3GHZ

**Specifications**
SoC: Filogic 820 MT7981A (1.3GHz)
RAM: DDR4 1GB
Flash: eMMC 8GB
WiFi: 2.4GHz and 5GHz with 3 antennas
Ethernet:
1x WAN (10/100/1000M)
1x LAN (10/100/1000/2500M)
USB: 1x USB 3.0 port
Two buttons: power/reset and mode (BTN_0)
LEDS: blue, red, blue+red=pink
UART: 3.3V, TX, RX, GND / 115200 8N1

**Installation via U-Boot rescue**
1. Set static IP 192.168.1.2 on your computer and default route as 192.168.1.1
2. Connect to the WAN port and hold the reset button while booting the device.
3. Wait for the LED to blink 5 times, and release the reset button.
4. Open U-boot web page on your browser at http://192.168.1.1
5. Select the OpenWRT sysupgrade image, upload it, and start the upgrade.
6. Wait for the router to flash the new firmware.
7. Wait for the router to reboot itself.

**Installation via sysupgrade**
Just flash sysupgrade file via [LuCI upgrade page](http://192.168.1.1/cgi-bin/luci/admin/system/flash) without saving the settings.

**Installation via SSH**
Upload the file to the router `/tmp` directory, `ssh root@192.168.1.1` and issue a command:
```
sysupgrade -n /tmp/openwrt-mediatek-filogic-huasifei_wh3000-emmc-squashfs-sysupgrade.bin
```

**Factory MAC**
You can find your Factory MAC which is mentioned on the box at `/dev/mmcblck0p2` partition `factory` starting from `0x4`
```
dd if=/dev/mmcblk0p2 bs=1 skip=4 count=6 | hexdump -C
```

**Enlarging a partition**
Though device has 8GB eMMC, it uses only 2GB `/dev/mmcblck0p6` as `rootfs` for `/rom` and `/overlay` leaving `/dev/mmcblck0p7` as empty unused space.
```
sgdisk -p /dev/mmcblk0
```
```
Disk /dev/mmcblk0: 15269888 sectors, 7.3 GiB
Sector size (logical/physical): 512/512 bytes
Disk identifier (GUID): 2BD17853-102B-4500-AA1A-8A21D4D7984D
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 14942174
Partitions will be aligned on 1024-sector boundaries
Total free space is 11197 sectors (5.5 MiB)

Number  Start (sector)    End (sector)  Size       Code  Name
   1            8192            9215   512.0 KiB   8300  u-boot-env
   2            9216           13311   2.0 MiB     8300  factory
   3           13312           21503   4.0 MiB     8300  fip
   4           21504           29695   4.0 MiB     8300  config
   5           29696           62463   16.0 MiB    8300  kernel
   6           62464         4256767   2.0 GiB     8300  rootfs
   7         4257792        14940159   5.1 GiB     8300
```

You can fix that by loading into `initramfs-kernel`, deleting empty `mmcblck0p7` partition and resizing `mmcblck0p6`
```
sysupgrade -F /tmp/openwrt-initramfs-kernel.bin
```
Install and run cfdisk
```
opkg update && opkg install cfdisk
cfdisk /dev/mmcblck0
```
- Select `mmcblck0p7` -> Delete
- Select `mmcblck0p6` -> Resize -> Write -> yes -> Quit

You will not see any difference in `cat /proc/partitions` after that but just flash a `sysupgrade` and you'll get the whole 7.3GB space for the `/overlay`.

Co-developed-by: hecatae <horus.ra@gmail.com>
Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18220
(cherry picked from commit 99ea96c297)
Link: https://github.com/openwrt/openwrt/pull/18434
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-04-10 20:29:37 +02:00
..
apex treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
arm-trusted-firmware-bcm63xx treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: add mt7986-spim-nand-ddr3 build 2024-12-10 01:08:03 +01:00
arm-trusted-firmware-mvebu arm-trusted-firmware-mvebu: refresh cryptopp hash 2024-04-29 13:02:23 +02:00
arm-trusted-firmware-rockchip treewide: update contact information 2024-09-11 00:37:34 +02:00
arm-trusted-firmware-stm32 arm-trusted-firmware-stm32: add ATF for stm32 boards 2024-11-28 18:48:28 +00:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Update to 2.10 2023-12-20 10:53:48 +08:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: fix build on macOS/Darwin 2023-08-12 16:45:47 +02:00
at91bootstrap at91bootstrap: update PKG_MIRROR_HASH to zstd for v3 at91bootstrap 2024-04-07 17:10:30 +02:00
fconfig treewide: unify OpenWrt hosted source via @OPENWRT 2021-02-05 12:00:24 -10:00
grub2 grub2: add EFI support for loongarch64 2024-05-04 14:14:24 +08:00
imx-bootlets imx-bootlets: Mark as nonshared to build in step 1 2024-07-30 21:42:33 +02:00
kexec-tools kexec-tools: fix multiple compile errors 2024-06-08 14:08:38 +02:00
kobs-ng kobs-ng: Mark as nonshared to build in step 1 2024-07-30 21:42:33 +02:00
mt7623n-preloader mt7623n-preloader: remove mt7622-preloader 2021-02-28 04:12:23 +00:00
opensbi opensbi: bump to 1.4 2024-05-03 11:09:22 +02:00
optee-os-stm32 optee-os-stm32: add OP-TEE for stm32 boards 2024-11-28 18:48:24 +00:00
rkbin rkbin: add rk3588 support 2024-08-11 18:56:27 +02:00
tfa-layerscape tfa-layerscape: fix fiptool's build 2024-09-24 12:29:06 +02:00
uboot-armsr uboot-armsr: add support for QEMU armv7/armv8 2023-06-10 21:50:22 +02:00
uboot-at91 treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
uboot-ath79 uboot-ath79: refresh patches 2024-10-19 17:56:46 +02:00
uboot-bcm53xx uboot-bcm53xx: bump to 2024.01 2024-01-20 19:38:20 +01:00
uboot-bcm4908 packages: refresh patches 2024-05-31 11:30:06 +02:00
uboot-bmips uboot-bmips: Add U-Boot for the BMIPS target 2024-05-01 21:30:32 +02:00
uboot-d1 uboot-d1: Adapt BUILD_DEVICES to renamed boards 2024-12-23 01:55:35 +01:00
uboot-envtools mediatek: filogic: add support for Huasifei WH3000 2025-04-10 20:29:37 +02:00
uboot-fritz4040 treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
uboot-imx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-kirkwood uboot-kirkwood: fix compilation with GCC14 2024-09-25 22:50:09 +02:00
uboot-lantiq uboot-laniq: fix compilation with GCC14 2024-09-08 11:49:20 +02:00
uboot-layerscape uboot-layerscape: bump to lf-6.6.23-2.0.0 2024-09-22 16:21:02 +02:00
uboot-mediatek mediatek: add support for netis NX31 2025-04-10 20:18:23 +02:00
uboot-mvebu uboot-mvebu: update to version 2024.10 2024-10-19 22:54:12 +02:00
uboot-mxs packages: refresh patches 2024-05-31 11:30:06 +02:00
uboot-omap treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-rockchip uboot-rockchip: fix build with swig 4.3.0 2024-12-23 21:26:47 +01:00
uboot-sifiveu packages: refresh patches 2024-05-31 11:30:06 +02:00
uboot-stm32 uboot-stm32: add U-Boot for stm32 boards 2024-11-28 18:48:26 +00:00
uboot-sunxi sunxi: add support for Lichee Pi Zero Dock (V3s) board 2024-05-04 00:41:02 +02:00
uboot-tegra uboot-tegra: Set UBOOT_USE_INTREE_DTC 2024-06-02 18:06:39 +02:00
uboot-zynq packages: refresh patches 2024-05-31 11:30:06 +02:00