mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2026-03-09 03:49:28 -04:00
3dba852547
Install following as config files (600) perms instead of as data (644) /usr/share/dnsmasq/dhcpbogushostname.conf /usr/share/dnsmasq/trust-anchors.conf /usr/share/dnsmasq/rfc6761.conf /etc/hotplug.d/ntp/25-dnsmasqsec /etc/config/dhcp /etc/dnsmasq.conf dnsmasq reads relevant config files before dropping root privilege and running as dnsmasq:dnsmasq ntpd runs as root so the hotplug script is still accessible Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org