INAGAKI Hiroshi d616b2c906 ath79: modify device name of I-O DATA WN-AC1600DGR2 ... The hardware of I-O DATA WN-AC1600DGR3 has completely compatibility with WN-AC1600DGR2, so modify the device name of WN-AC1600DGR2 to show the images for DGR2 also support DGR3. Specification of WN-AC1600DGR3: - SoC : Qualcomm Atheros QCA9557 - RAM : DDR2 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz - 2.4 GHz : QCA9557 (SoC), 2T2R - 5 Ghz : QCA9880, 3T3R - Ethernet : 5x 10/100/1000 Mbps - Switch : QCA8337N - LEDs/Input : 6x/6x (4x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: Vcc, GND, TX, RX from ethernet port side - 115200n8 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2019-07-18 00:06:55 +02:00
..
base-files	ath79: Add support for TP-Link Archer C60 v2	2019-07-18 00:06:55 +02:00
dts	ath79: modify device name of I-O DATA WN-AC1600DGR2	2019-07-18 00:06:55 +02:00
files	ath79: support "rgmii-id" PHY mode in ag71xx	2019-07-17 22:59:29 +02:00
generic	ath79: widen RedBoot directory search and add PHY	2019-07-17 22:59:29 +02:00
image	ath79: modify device name of I-O DATA WN-AC1600DGR2	2019-07-18 00:06:55 +02:00
nand	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.127	2019-06-18 14:47:53 +02:00
patches-4.19	kernel: bump 4.19 to 4.19.52	2019-06-18 14:47:53 +02:00
tiny	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
config-4.14	ath79: add support for D-Link DIR-859 A1	2018-12-30 20:08:13 +01:00
config-4.19	ath79: add support for Qihoo C301	2019-07-16 09:51:03 +08:00
Makefile	treewide: kernel: bump some targets to 4.19	2019-06-18 16:08:55 +02:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00