mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-24 02:24:33 -04:00
34d2964554
Fixes issues with RTL8156 2.5G USB adapters
- # ethtool eth1
Settings for eth1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 2500Mb/s
Duplex: Half
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
MDI-X: Unknown
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
- #
- r8152: break the loop when the budget is exhausted
- r8152: Block future register access if register access fails
- r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
- r8152: add vendor/device ID pair for D-Link DUB-E250
- r8152: try to use a normal budget
- r8152: set bp in bulk
- r8152: adjust generic_ocp_write function
- r8152: fix the autosuspend doesn't work
- r8152: Add __GFP_NOWARN to big allocations
- r8152: reduce the control transfer of rtl8152_get_version()
- r8152: remove rtl_vendor_mode function
- r8152: avoid to change cfg for all devices
- r8152: add USB device driver for config selection
- r8152: use napi_gro_frags
- cdc_ether: no need to blacklist any r8152 devices
- cdc_ether: add u-blox 0x1313 composition
Build system: x86_64
Build-tested: bcm2711, rockchip, x86/64
Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64
Signed-off-by: Marty Jones <mj8263788@gmail.com>
75 lines
1.9 KiB
Diff
75 lines
1.9 KiB
Diff
From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
|
|
From: David Bauer <mail@david-bauer.net>
|
|
Date: Sun, 26 Jul 2020 02:38:31 +0200
|
|
Subject: [PATCH] net: usb: r8152: add LED configuration from OF
|
|
|
|
This adds the ability to configure the LED configuration register using
|
|
OF. This way, the correct value for board specific LED configuration can
|
|
be determined.
|
|
|
|
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
---
|
|
drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
|
|
1 file changed, 23 insertions(+)
|
|
|
|
--- a/drivers/net/usb/r8152.c
|
|
+++ b/drivers/net/usb/r8152.c
|
|
@@ -11,6 +11,7 @@
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/usb.h>
|
|
+#include <linux/of.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/uaccess.h>
|
|
@@ -7020,6 +7021,22 @@ static void rtl_tally_reset(struct r8152
|
|
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
|
|
}
|
|
|
|
+static int r8152_led_configuration(struct r8152 *tp)
|
|
+{
|
|
+ u32 led_data;
|
|
+ int ret;
|
|
+
|
|
+ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
|
|
+ &led_data);
|
|
+
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static void r8152b_init(struct r8152 *tp)
|
|
{
|
|
u32 ocp_data;
|
|
@@ -7061,6 +7078,8 @@ static void r8152b_init(struct r8152 *tp
|
|
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
|
|
ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
|
|
ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
|
|
+
|
|
+ r8152_led_configuration(tp);
|
|
}
|
|
|
|
static void r8153_init(struct r8152 *tp)
|
|
@@ -7201,6 +7220,8 @@ static void r8153_init(struct r8152 *tp)
|
|
tp->coalesce = COALESCE_SLOW;
|
|
break;
|
|
}
|
|
+
|
|
+ r8152_led_configuration(tp);
|
|
}
|
|
|
|
static void r8153b_init(struct r8152 *tp)
|
|
@@ -7283,6 +7304,8 @@ static void r8153b_init(struct r8152 *tp
|
|
rtl_tally_reset(tp);
|
|
|
|
tp->coalesce = 15000; /* 15 us */
|
|
+
|
|
+ r8152_led_configuration(tp);
|
|
}
|
|
|
|
static void r8153c_init(struct r8152 *tp)
|