David Bauer 2bcc3163a6 ramips: pad EX400 kernel partition to retain web recovery ... The web-recovery of the Genexis EX400 validates uploaded images to fit in the rootf_0 partition. With OpenWrt, only the kernel is stored in this partition, leaving the partition very small. Currently, the first factory release image won't be accepted by the recovery interface after the OpenWrt installation. Pad the image of the ubifs to 10MB. This allows the 24.10 release image to be uploaded, enabling device recovery. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit eea4689654)		2025-05-14 19:03:17 +02:00
..
base-files/etc	ramips: remove model name from LED labels	2020-10-02 14:51:57 +02:00
dts	ramips: use i2c-gpio driver for EX400	2025-05-12 02:20:58 +02:00
files/drivers	ramips: mtk-mmc: remove nt76x8 pinctrl hack	2025-01-04 19:25:34 +01:00
image	ramips: pad EX400 kernel partition to retain web recovery	2025-05-14 19:03:17 +02:00
mt76x8	ramips: Add support for Xiaomi MiWiFi 3A	2025-05-07 21:23:54 +02:00
mt7620	ramips: add support for Hongdian H8922 v30	2025-03-15 11:54:54 +01:00
mt7621	ramips: support Genexis EX400 touch controller	2025-05-12 02:20:58 +02:00
patches-6.6	ramips: add Semtech SX9512 touch input driver	2025-05-12 02:20:58 +02:00
rt288x	kernel: filter out compiler opts from config	2024-11-28 18:47:54 +00:00
rt305x	ramips: mt76x8: disable unused Ralink systick driver	2024-11-28 18:49:27 +00:00
rt3883	kernel: filter out compiler opts from config	2024-11-28 18:47:54 +00:00
Makefile	ramips: switch to Linux 6.6	2024-05-03 21:36:42 +01:00
modules.mk	ramips: add Semtech SX9512 touch input driver	2025-05-12 02:20:58 +02:00