mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-30 21:44:27 -04:00
d4c999bb89
backport from wireless-drivers-next, replacing some existing patches in our tree (marked with '=' are those which were already present): f483039cf51a rt2x00: use simple_read_from_buffer() =5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib =0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib =5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet =adf26a356f13 rt2x00: use different txstatus timeouts when flushing =0240564430c0 rt2800: flush and txstatus rework for rt2800mmio 6eba8fd22352 rt2x00: rt2400pci: mark expected switch fall-through 10bb92217747 rt2x00: rt2500pci: mark expected switch fall-through 916e6bbcfcff rt2x00: rt2800lib: mark expected switch fall-throughs 641dd8068ecb rt2x00: rt61pci: mark expected switch fall-through 750afb08ca71 cross-tree: phase out dma_zalloc_coherent() =c2e28ef7711f rt2x00: reduce tx power to nominal level on RT6352 a4296994eb80 rt2x00: Work around a firmware bug with shared keys 2587791d5758 rt2x00: no need to check return value of debugfs_create functions pending on linux-wireless: rt2x00: remove unneeded check rt2x00: remove confusing AGC register rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 rt2800: comment and simplify AGC init for RT6352 rt2x00: do not print error when queue is full rt2800: partially restore old mmio txstatus behaviour rt2800: new flush implementation for SoC devices rt2800: move txstatus pending routine rt2800mmio: fetch tx status changes rt2800mmio: use timer and work for handling tx statuses timeouts rt2x00: remove last_nostatus_check rt2x00: remove not used entry field rt2x00mmio: remove legacy comment While at it also rename some existing patches now that there are separate folders with patches for each driver to make things a bit nicer to handle. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
48 lines
903 B
Diff
48 lines
903 B
Diff
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
|
|
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
|
|
@@ -225,36 +225,37 @@ config RT2800SOC
|
|
|
|
|
|
config RT2800_LIB
|
|
- tristate
|
|
+ tristate "RT2800 USB/PCI support"
|
|
depends on m
|
|
|
|
config RT2800_LIB_MMIO
|
|
- tristate
|
|
+ tristate "RT2800 MMIO support"
|
|
depends on m
|
|
select RT2X00_LIB_MMIO
|
|
select RT2800_LIB
|
|
|
|
config RT2X00_LIB_MMIO
|
|
- tristate
|
|
+ tristate "RT2x00 MMIO support"
|
|
depends on m
|
|
|
|
config RT2X00_LIB_PCI
|
|
- tristate
|
|
+ tristate "RT2x00 PCI support"
|
|
depends on m
|
|
select RT2X00_LIB
|
|
|
|
config RT2X00_LIB_SOC
|
|
- tristate
|
|
+ tristate "RT2x00 SoC support"
|
|
+ depends on SOC_RT288X || SOC_RT305X || SOC_MT7620
|
|
depends on m
|
|
select RT2X00_LIB
|
|
|
|
config RT2X00_LIB_USB
|
|
- tristate
|
|
+ tristate "RT2x00 USB support"
|
|
depends on m
|
|
select RT2X00_LIB
|
|
|
|
config RT2X00_LIB
|
|
- tristate
|
|
+ tristate "RT2x00 support"
|
|
depends on m
|
|
|
|
config RT2X00_LIB_FIRMWARE
|