mirror of
				git://git.openwrt.org/openwrt/openwrt.git
				synced 2025-10-31 05:54:26 -04:00 
			
		
		
		
	This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> SVN-Revision: 26865
		
			
				
	
	
		
			738 lines
		
	
	
		
			16 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			738 lines
		
	
	
		
			16 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * ADM6996 switch driver
 | |
|  *
 | |
|  * swconfig interface based on ar8216.c
 | |
|  *
 | |
|  * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
 | |
|  * VLAN support Copyright (c) 2010, 2011 Peter Lebbing <peter@digitalbrains.com>
 | |
|  *
 | |
|  * This program is free software; you can redistribute  it and/or modify it
 | |
|  * under  the terms of the GNU General Public License v2 as published by the
 | |
|  * Free Software Foundation
 | |
|  */
 | |
| 
 | |
| /*#define DEBUG 1*/
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/string.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/unistd.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/netdevice.h>
 | |
| #include <linux/etherdevice.h>
 | |
| #include <linux/skbuff.h>
 | |
| #include <linux/spinlock.h>
 | |
| #include <linux/mm.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/mii.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/phy.h>
 | |
| #include <linux/switch.h>
 | |
| 
 | |
| #include <asm/io.h>
 | |
| #include <asm/irq.h>
 | |
| #include <asm/uaccess.h>
 | |
| #include "adm6996.h"
 | |
| 
 | |
| MODULE_DESCRIPTION("Infineon ADM6996 Switch");
 | |
| MODULE_AUTHOR("Felix Fietkau, Peter Lebbing <peter@digitalbrains.com>");
 | |
| MODULE_LICENSE("GPL");
 | |
| 
 | |
| enum adm6996_model {
 | |
| 	ADM6996FC,
 | |
| 	ADM6996M
 | |
| };
 | |
| 
 | |
| static const char * const adm6996_model_name[] =
 | |
| {
 | |
| 	"ADM6996FC",
 | |
| 	"ADM6996M"
 | |
| };
 | |
| 
 | |
| struct adm6996_priv {
 | |
| 	struct switch_dev dev;
 | |
| 	struct phy_device *phydev;
 | |
| 
 | |
| 	enum adm6996_model model;
 | |
| 
 | |
| 	bool enable_vlan;
 | |
| 	bool vlan_enabled;	/* Current hardware state */
 | |
| 
 | |
| #ifdef DEBUG
 | |
| 	u16 addr;		/* Debugging: register address to operate on */
 | |
| #endif
 | |
| 
 | |
| 	u16 pvid[ADM_NUM_PORTS];	/* Primary VLAN ID */
 | |
| 
 | |
| 	u16 vlan_id[ADM_NUM_VLANS];
 | |
| 	u8 vlan_table[ADM_NUM_VLANS];	/* bitmap, 1 = port is member */
 | |
| 	u8 vlan_tagged[ADM_NUM_VLANS];	/* bitmap, 1 = tagged member */
 | |
| 
 | |
| 	struct mutex reg_mutex;
 | |
| 
 | |
| 	/* use abstraction for regops, we want to add gpio support in the future */
 | |
| 	u16 (*read)(struct phy_device *phydev, enum admreg reg);
 | |
| 	void (*write)(struct phy_device *phydev, enum admreg reg, u16 val);
 | |
| };
 | |
| 
 | |
| #define to_adm(_dev) container_of(_dev, struct adm6996_priv, dev)
 | |
| #define phy_to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv)
 | |
| 
 | |
| static inline u16
 | |
| r16(struct phy_device *pdev, enum admreg reg)
 | |
| {
 | |
| 	return phy_to_adm(pdev)->read(pdev, reg);
 | |
| }
 | |
| 
 | |
| static inline void
 | |
| w16(struct phy_device *pdev, enum admreg reg, u16 val)
 | |
| {
 | |
| 	phy_to_adm(pdev)->write(pdev, reg, val);
 | |
| }
 | |
| 
 | |
| 
 | |
| static u16
 | |
| adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg)
 | |
| {
 | |
| 	return phydev->bus->read(phydev->bus, PHYADDR(reg));
 | |
| }
 | |
| 
 | |
| static void
 | |
| adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val)
 | |
| {
 | |
| 	phydev->bus->write(phydev->bus, PHYADDR(reg), val);
 | |
| }
 | |
| 
 | |
| static int
 | |
| adm6996_set_enable_vlan(struct switch_dev *dev, const struct switch_attr *attr,
 | |
| 			struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	if (val->value.i > 1)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	priv->enable_vlan = val->value.i;
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| static int
 | |
| adm6996_get_enable_vlan(struct switch_dev *dev, const struct switch_attr *attr,
 | |
| 			struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	val->value.i = priv->enable_vlan;
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| #ifdef DEBUG
 | |
| 
 | |
| static int
 | |
| adm6996_set_addr(struct switch_dev *dev, const struct switch_attr *attr,
 | |
| 		 struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	if (val->value.i > 1023)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	priv->addr = val->value.i;
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| static int
 | |
| adm6996_get_addr(struct switch_dev *dev, const struct switch_attr *attr,
 | |
| 		 struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	val->value.i = priv->addr;
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| static int
 | |
| adm6996_set_data(struct switch_dev *dev, const struct switch_attr *attr,
 | |
| 		 struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	if (val->value.i > 65535)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	w16(priv->phydev, priv->addr, val->value.i);
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| static int
 | |
| adm6996_get_data(struct switch_dev *dev, const struct switch_attr *attr,
 | |
| 		 struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	val->value.i = r16(priv->phydev, priv->addr);
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| #endif /* def DEBUG */
 | |
| 
 | |
| static int
 | |
| adm6996_set_pvid(struct switch_dev *dev, int port, int vlan)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	dev_dbg (&priv->phydev->dev, "set_pvid port %d vlan %d\n", port
 | |
| 			, vlan);
 | |
| 
 | |
| 	if (vlan > ADM_VLAN_MAX_ID)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	priv->pvid[port] = vlan;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| adm6996_get_pvid(struct switch_dev *dev, int port, int *vlan)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	dev_dbg (&priv->phydev->dev, "get_pvid port %d\n", port);
 | |
| 	*vlan = priv->pvid[port];
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| adm6996_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
 | |
| 		struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	dev_dbg (&priv->phydev->dev, "set_vid port %d vid %d\n", val->port_vlan,
 | |
| 			val->value.i);
 | |
| 
 | |
| 	if (val->value.i > ADM_VLAN_MAX_ID)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	priv->vlan_id[val->port_vlan] = val->value.i;
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| static int
 | |
| adm6996_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
 | |
| 		struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	dev_dbg (&priv->phydev->dev, "get_vid port %d\n", val->port_vlan);
 | |
| 
 | |
| 	val->value.i = priv->vlan_id[val->port_vlan];
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| static int
 | |
| adm6996_get_ports(struct switch_dev *dev, struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 	u8 ports = priv->vlan_table[val->port_vlan];
 | |
| 	u8 tagged = priv->vlan_tagged[val->port_vlan];
 | |
| 	int i;
 | |
| 
 | |
| 	dev_dbg (&priv->phydev->dev, "get_ports port_vlan %d\n",
 | |
| 			val->port_vlan);
 | |
| 
 | |
| 	val->len = 0;
 | |
| 
 | |
| 	for (i = 0; i < ADM_NUM_PORTS; i++) {
 | |
| 		struct switch_port *p;
 | |
| 
 | |
| 		if (!(ports & (1 << i)))
 | |
| 			continue;
 | |
| 
 | |
| 		p = &val->value.ports[val->len++];
 | |
| 		p->id = i;
 | |
| 		if (tagged & (1 << i))
 | |
| 			p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
 | |
| 		else
 | |
| 			p->flags = 0;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| static int
 | |
| adm6996_set_ports(struct switch_dev *dev, struct switch_val *val)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 	u8 *ports = &priv->vlan_table[val->port_vlan];
 | |
| 	u8 *tagged = &priv->vlan_tagged[val->port_vlan];
 | |
| 	int i;
 | |
| 
 | |
| 	dev_dbg (&priv->phydev->dev, "set_ports port_vlan %d ports",
 | |
| 			val->port_vlan);
 | |
| 
 | |
| 	*ports = 0;
 | |
| 	*tagged = 0;
 | |
| 
 | |
| 	for (i = 0; i < val->len; i++) {
 | |
| 		struct switch_port *p = &val->value.ports[i];
 | |
| 
 | |
| #ifdef DEBUG
 | |
| 		pr_cont(" %d%s", p->id,
 | |
| 		       ((p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) ? "T" :
 | |
| 			""));
 | |
| #endif
 | |
| 
 | |
| 		if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
 | |
| 			*tagged |= (1 << p->id);
 | |
| 
 | |
| 		*ports |= (1 << p->id);
 | |
| 	}
 | |
| 
 | |
| #ifdef DEBUG
 | |
| 	pr_cont("\n");
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Precondition: reg_mutex must be held
 | |
|  */
 | |
| static void
 | |
| adm6996_enable_vlan(struct adm6996_priv *priv)
 | |
| {
 | |
| 	u16 reg;
 | |
| 
 | |
| 	reg = r16(priv->phydev, ADM_OTBE_P2_PVID);
 | |
| 	reg &= ~(ADM_OTBE_MASK);
 | |
| 	w16(priv->phydev, ADM_OTBE_P2_PVID, reg);
 | |
| 	reg = r16(priv->phydev, ADM_IFNTE);
 | |
| 	reg &= ~(ADM_IFNTE_MASK);
 | |
| 	w16(priv->phydev, ADM_IFNTE, reg);
 | |
| 	reg = r16(priv->phydev, ADM_VID_CHECK);
 | |
| 	reg |= ADM_VID_CHECK_MASK;
 | |
| 	w16(priv->phydev, ADM_VID_CHECK, reg);
 | |
| 	reg = r16(priv->phydev, ADM_SYSC0);
 | |
| 	reg |= ADM_NTTE;
 | |
| 	reg &= ~(ADM_RVID1);
 | |
| 	w16(priv->phydev, ADM_SYSC0, reg);
 | |
| 	reg = r16(priv->phydev, ADM_SYSC3);
 | |
| 	reg |= ADM_TBV;
 | |
| 	w16(priv->phydev, ADM_SYSC3, reg);
 | |
| 
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Disable VLANs
 | |
|  *
 | |
|  * Sets VLAN mapping for port-based VLAN with all ports connected to
 | |
|  * eachother (this is also the power-on default).
 | |
|  *
 | |
|  * Precondition: reg_mutex must be held
 | |
|  */
 | |
| static void
 | |
| adm6996_disable_vlan(struct adm6996_priv *priv)
 | |
| {
 | |
| 	u16 reg;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ADM_NUM_PORTS; i++) {
 | |
| 		reg = ADM_VLAN_FILT_MEMBER_MASK;
 | |
| 		w16(priv->phydev, ADM_VLAN_FILT_L(i), reg);
 | |
| 		reg = ADM_VLAN_FILT_VALID | ADM_VLAN_FILT_VID(1);
 | |
| 		w16(priv->phydev, ADM_VLAN_FILT_H(i), reg);
 | |
| 	}
 | |
| 
 | |
| 	reg = r16(priv->phydev, ADM_OTBE_P2_PVID);
 | |
| 	reg |= ADM_OTBE_MASK;
 | |
| 	w16(priv->phydev, ADM_OTBE_P2_PVID, reg);
 | |
| 	reg = r16(priv->phydev, ADM_IFNTE);
 | |
| 	reg |= ADM_IFNTE_MASK;
 | |
| 	w16(priv->phydev, ADM_IFNTE, reg);
 | |
| 	reg = r16(priv->phydev, ADM_VID_CHECK);
 | |
| 	reg &= ~(ADM_VID_CHECK_MASK);
 | |
| 	w16(priv->phydev, ADM_VID_CHECK, reg);
 | |
| 	reg = r16(priv->phydev, ADM_SYSC0);
 | |
| 	reg &= ~(ADM_NTTE);
 | |
| 	reg |= ADM_RVID1;
 | |
| 	w16(priv->phydev, ADM_SYSC0, reg);
 | |
| 	reg = r16(priv->phydev, ADM_SYSC3);
 | |
| 	reg &= ~(ADM_TBV);
 | |
| 	w16(priv->phydev, ADM_SYSC3, reg);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Precondition: reg_mutex must be held
 | |
|  */
 | |
| static void
 | |
| adm6996_apply_port_pvids(struct adm6996_priv *priv)
 | |
| {
 | |
| 	u16 reg;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ADM_NUM_PORTS; i++) {
 | |
| 		reg = r16(priv->phydev, adm_portcfg[i]);
 | |
| 		reg &= ~(ADM_PORTCFG_PVID_MASK);
 | |
| 		reg |= ADM_PORTCFG_PVID(priv->pvid[i]);
 | |
| 		w16(priv->phydev, adm_portcfg[i], reg);
 | |
| 	}
 | |
| 
 | |
| 	w16(priv->phydev, ADM_P0_PVID, ADM_P0_PVID_VAL(priv->pvid[0]));
 | |
| 	w16(priv->phydev, ADM_P1_PVID, ADM_P1_PVID_VAL(priv->pvid[1]));
 | |
| 	reg = r16(priv->phydev, ADM_OTBE_P2_PVID);
 | |
| 	reg &= ~(ADM_P2_PVID_MASK);
 | |
| 	reg |= ADM_P2_PVID_VAL(priv->pvid[2]);
 | |
| 	w16(priv->phydev, ADM_OTBE_P2_PVID, reg);
 | |
| 	reg = ADM_P3_PVID_VAL(priv->pvid[3]);
 | |
| 	reg |= ADM_P4_PVID_VAL(priv->pvid[4]);
 | |
| 	w16(priv->phydev, ADM_P3_P4_PVID, reg);
 | |
| 	w16(priv->phydev, ADM_P5_PVID, ADM_P5_PVID_VAL(priv->pvid[5]));
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Precondition: reg_mutex must be held
 | |
|  */
 | |
| static void
 | |
| adm6996_apply_vlan_filters(struct adm6996_priv *priv)
 | |
| {
 | |
| 	u8 ports, tagged;
 | |
| 	u16 vid, reg;
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ADM_NUM_VLANS; i++) {
 | |
| 		vid = priv->vlan_id[i];
 | |
| 		ports = priv->vlan_table[i];
 | |
| 		tagged = priv->vlan_tagged[i];
 | |
| 
 | |
| 		if (ports == 0) {
 | |
| 			/* Disable VLAN entry */
 | |
| 			w16(priv->phydev, ADM_VLAN_FILT_H(i), 0);
 | |
| 			w16(priv->phydev, ADM_VLAN_FILT_L(i), 0);
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		reg = ADM_VLAN_FILT_MEMBER(ports);
 | |
| 		reg |= ADM_VLAN_FILT_TAGGED(tagged);
 | |
| 		w16(priv->phydev, ADM_VLAN_FILT_L(i), reg);
 | |
| 		reg = ADM_VLAN_FILT_VALID | ADM_VLAN_FILT_VID(vid);
 | |
| 		w16(priv->phydev, ADM_VLAN_FILT_H(i), reg);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int
 | |
| adm6996_hw_apply(struct switch_dev *dev)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	dev_dbg(&priv->phydev->dev, "hw_apply\n");
 | |
| 
 | |
| 	mutex_lock(&priv->reg_mutex);
 | |
| 
 | |
| 	if (!priv->enable_vlan) {
 | |
| 		if (priv->vlan_enabled) {
 | |
| 			adm6996_disable_vlan(priv);
 | |
| 			priv->vlan_enabled = 0;
 | |
| 		}
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	if (!priv->vlan_enabled) {
 | |
| 		adm6996_enable_vlan(priv);
 | |
| 		priv->vlan_enabled = 1;
 | |
| 	}
 | |
| 
 | |
| 	adm6996_apply_port_pvids(priv);
 | |
| 	adm6996_apply_vlan_filters(priv);
 | |
| 
 | |
| out:
 | |
| 	mutex_unlock(&priv->reg_mutex);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Reset the switch
 | |
|  *
 | |
|  * The ADM6996 can't do a software-initiated reset, so we just initialise the
 | |
|  * registers we support in this driver.
 | |
|  *
 | |
|  * Precondition: reg_mutex must be held
 | |
|  */
 | |
| static void
 | |
| adm6996_perform_reset (struct adm6996_priv *priv)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	/* initialize port and vlan settings */
 | |
| 	for (i = 0; i < ADM_NUM_PORTS - 1; i++) {
 | |
| 		w16(priv->phydev, adm_portcfg[i], ADM_PORTCFG_INIT |
 | |
| 			ADM_PORTCFG_PVID(0));
 | |
| 	}
 | |
| 	w16(priv->phydev, adm_portcfg[5], ADM_PORTCFG_CPU);
 | |
| 
 | |
| 	/* reset all PHY ports */
 | |
| 	for (i = 0; i < ADM_PHY_PORTS; i++) {
 | |
| 		w16(priv->phydev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT);
 | |
| 	}
 | |
| 
 | |
| 	priv->enable_vlan = 0;
 | |
| 	priv->vlan_enabled = 0;
 | |
| 
 | |
| 	for (i = 0; i < ADM_NUM_PORTS; i++) {
 | |
| 		priv->pvid[i] = 0;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < ADM_NUM_VLANS; i++) {
 | |
| 		priv->vlan_id[i] = i;
 | |
| 		priv->vlan_table[i] = 0;
 | |
| 		priv->vlan_tagged[i] = 0;
 | |
| 	}
 | |
| 
 | |
| 	if (priv->model == ADM6996M) {
 | |
| 		/* Clear VLAN priority map so prio's are unused */
 | |
| 		w16 (priv->phydev, ADM_VLAN_PRIOMAP, 0);
 | |
| 
 | |
| 		adm6996_disable_vlan(priv);
 | |
| 		adm6996_apply_port_pvids(priv);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int
 | |
| adm6996_reset_switch(struct switch_dev *dev)
 | |
| {
 | |
| 	struct adm6996_priv *priv = to_adm(dev);
 | |
| 
 | |
| 	dev_dbg (&priv->phydev->dev, "reset\n");
 | |
| 	mutex_lock(&priv->reg_mutex);
 | |
| 	adm6996_perform_reset (priv);
 | |
| 	mutex_unlock(&priv->reg_mutex);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct switch_attr adm6996_globals[] = {
 | |
| 	{
 | |
| 	 .type = SWITCH_TYPE_INT,
 | |
| 	 .name = "enable_vlan",
 | |
| 	 .description = "Enable VLANs",
 | |
| 	 .set = adm6996_set_enable_vlan,
 | |
| 	 .get = adm6996_get_enable_vlan,
 | |
| 	},
 | |
| #ifdef DEBUG
 | |
| 	{
 | |
| 	 .type = SWITCH_TYPE_INT,
 | |
| 	 .name = "addr",
 | |
| 	 .description =
 | |
| 	 "Direct register access: set register address (0 - 1023)",
 | |
| 	 .set = adm6996_set_addr,
 | |
| 	 .get = adm6996_get_addr,
 | |
| 	 },
 | |
| 	{
 | |
| 	 .type = SWITCH_TYPE_INT,
 | |
| 	 .name = "data",
 | |
| 	 .description =
 | |
| 	 "Direct register access: read/write to register (0 - 65535)",
 | |
| 	 .set = adm6996_set_data,
 | |
| 	 .get = adm6996_get_data,
 | |
| 	 },
 | |
| #endif /* def DEBUG */
 | |
| };
 | |
| 
 | |
| static struct switch_attr adm6996_port[] = {
 | |
| };
 | |
| 
 | |
| static struct switch_attr adm6996_vlan[] = {
 | |
| 	{
 | |
| 	 .type = SWITCH_TYPE_INT,
 | |
| 	 .name = "vid",
 | |
| 	 .description = "VLAN ID",
 | |
| 	 .set = adm6996_set_vid,
 | |
| 	 .get = adm6996_get_vid,
 | |
| 	 },
 | |
| };
 | |
| 
 | |
| static const struct switch_dev_ops adm6996_ops = {
 | |
| 	.attr_global = {
 | |
| 			.attr = adm6996_globals,
 | |
| 			.n_attr = ARRAY_SIZE(adm6996_globals),
 | |
| 			},
 | |
| 	.attr_port = {
 | |
| 		      .attr = adm6996_port,
 | |
| 		      .n_attr = ARRAY_SIZE(adm6996_port),
 | |
| 		      },
 | |
| 	.attr_vlan = {
 | |
| 		      .attr = adm6996_vlan,
 | |
| 		      .n_attr = ARRAY_SIZE(adm6996_vlan),
 | |
| 		      },
 | |
| 	.get_port_pvid = adm6996_get_pvid,
 | |
| 	.set_port_pvid = adm6996_set_pvid,
 | |
| 	.get_vlan_ports = adm6996_get_ports,
 | |
| 	.set_vlan_ports = adm6996_set_ports,
 | |
| 	.apply_config = adm6996_hw_apply,
 | |
| 	.reset_switch = adm6996_reset_switch,
 | |
| };
 | |
| 
 | |
| static int adm6996_config_init(struct phy_device *pdev)
 | |
| {
 | |
| 	struct adm6996_priv *priv;
 | |
| 	struct switch_dev *swdev;
 | |
| 
 | |
| 	int ret;
 | |
| 	u16 test, old;
 | |
| 
 | |
| 	pdev->supported = ADVERTISED_100baseT_Full;
 | |
| 	pdev->advertising = ADVERTISED_100baseT_Full;
 | |
| 
 | |
| 	if (pdev->addr != 0) {
 | |
| 		pr_info ("%s: PHY overlaps ADM6996, providing fixed PHY 0x%x.\n"
 | |
| 				, pdev->attached_dev->name, pdev->addr);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL);
 | |
| 	if (priv == NULL)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	mutex_init(&priv->reg_mutex);
 | |
| 	priv->phydev = pdev;
 | |
| 	priv->read = adm6996_read_mii_reg;
 | |
| 	priv->write = adm6996_write_mii_reg;
 | |
| 	pdev->priv = priv;
 | |
| 
 | |
| 	/* Detect type of chip */
 | |
| 	old = r16(pdev, ADM_VID_CHECK);
 | |
| 	test = old ^ (1 << 12);
 | |
| 	w16(pdev, ADM_VID_CHECK, test);
 | |
| 	test ^= r16(pdev, ADM_VID_CHECK);
 | |
| 	if (test & (1 << 12)) {
 | |
| 		/* 
 | |
| 		 * Bit 12 of this register is read-only. 
 | |
| 		 * This is the FC model. 
 | |
| 		 */
 | |
| 		priv->model = ADM6996FC;
 | |
| 	} else {
 | |
| 		/* Bit 12 is read-write. This is the M model. */
 | |
| 		priv->model = ADM6996M;
 | |
| 		w16(pdev, ADM_VID_CHECK, old);
 | |
| 	}
 | |
| 
 | |
| 	swdev = &priv->dev;
 | |
| 	swdev->name = (adm6996_model_name[priv->model]);
 | |
| 	swdev->cpu_port = ADM_CPU_PORT;
 | |
| 	swdev->ports = ADM_NUM_PORTS;
 | |
| 	swdev->vlans = ADM_NUM_VLANS;
 | |
| 	swdev->ops = &adm6996_ops;
 | |
| 
 | |
| 	pr_info ("%s: %s model PHY found.\n", pdev->attached_dev->name,
 | |
| 			swdev->name);
 | |
| 
 | |
| 	mutex_lock(&priv->reg_mutex);
 | |
| 	adm6996_perform_reset (priv);
 | |
| 	mutex_unlock(&priv->reg_mutex);
 | |
| 
 | |
| 	if (priv->model == ADM6996M) {
 | |
| 		if ((ret = register_switch(swdev, pdev->attached_dev)) < 0) {
 | |
| 			kfree(priv);
 | |
| 			return ret;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Warning: phydev->priv is NULL if phydev->addr != 0
 | |
|  */
 | |
| static int adm6996_read_status(struct phy_device *phydev)
 | |
| {
 | |
| 	phydev->speed = SPEED_100;
 | |
| 	phydev->duplex = DUPLEX_FULL;
 | |
| 	phydev->link = 1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Warning: phydev->priv is NULL if phydev->addr != 0
 | |
|  */
 | |
| static int adm6996_config_aneg(struct phy_device *phydev)
 | |
| {
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adm6996_fixup(struct phy_device *dev)
 | |
| {
 | |
| 	struct mii_bus *bus = dev->bus;
 | |
| 	u16 reg;
 | |
| 
 | |
| 	/* Our custom registers are at PHY addresses 0-10. Claim those. */
 | |
| 	if (dev->addr > 10)
 | |
| 		return 0;
 | |
| 
 | |
| 	/* look for the switch on the bus */
 | |
| 	reg = bus->read(bus, PHYADDR(ADM_SIG0)) & ADM_SIG0_MASK;
 | |
| 	if (reg != ADM_SIG0_VAL)
 | |
| 		return 0;
 | |
| 
 | |
| 	reg = bus->read(bus, PHYADDR(ADM_SIG1)) & ADM_SIG1_MASK;
 | |
| 	if (reg != ADM_SIG1_VAL)
 | |
| 		return 0;
 | |
| 
 | |
| 	dev->phy_id = (ADM_SIG0_VAL << 16) | ADM_SIG1_VAL;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int adm6996_probe(struct phy_device *pdev)
 | |
| {
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void adm6996_remove(struct phy_device *pdev)
 | |
| {
 | |
| 	struct adm6996_priv *priv = phy_to_adm(pdev);
 | |
| 
 | |
| 	if (priv != NULL && priv->model == ADM6996M)
 | |
| 		unregister_switch(&priv->dev);
 | |
| 
 | |
| 	kfree(priv);
 | |
| }
 | |
| 
 | |
| 
 | |
| static struct phy_driver adm6996_driver = {
 | |
| 	.name		= "Infineon ADM6996",
 | |
| 	.phy_id		= (ADM_SIG0_VAL << 16) | ADM_SIG1_VAL,
 | |
| 	.phy_id_mask	= 0xffffffff,
 | |
| 	.features	= PHY_BASIC_FEATURES,
 | |
| 	.probe		= adm6996_probe,
 | |
| 	.remove		= adm6996_remove,
 | |
| 	.config_init	= &adm6996_config_init,
 | |
| 	.config_aneg	= &adm6996_config_aneg,
 | |
| 	.read_status	= &adm6996_read_status,
 | |
| 	.driver		= { .owner = THIS_MODULE,},
 | |
| };
 | |
| 
 | |
| static int __init adm6996_init(void)
 | |
| {
 | |
| 	phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup);
 | |
| 	return phy_driver_register(&adm6996_driver);
 | |
| }
 | |
| 
 | |
| static void __exit adm6996_exit(void)
 | |
| {
 | |
| 	phy_driver_unregister(&adm6996_driver);
 | |
| }
 | |
| 
 | |
| module_init(adm6996_init);
 | |
| module_exit(adm6996_exit);
 |