mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-26 11:34:27 -04:00
d4ac26ec49
Current version of rtl8366-smi module only supports Realtek switch
managment via two gpio lines. This adds Realtek switch
management via mii_bus. Tested on a Tp-link Archer C2 v1 (Mediatek
SoC mt7620a based)
dts-file configuration should look like this:
rtl8367rb {
compatible = "realtek,rtl8367b";
realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
mii-bus = <&mdio0>;
};
ðernet {
status = "okay";
mtd-mac-address = <&rom 0xf100>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio0: mdio-bus {
status = "okay";
};
};
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Franz Flasch <franz.flasch@gmx.at>
|
||
|---|---|---|
| .. | ||
| b53 | ||
| adm6996.c | ||
| adm6996.h | ||
| ar8216.c | ||
| ar8216.h | ||
| ar8327.c | ||
| ar8327.h | ||
| ip17xx.c | ||
| mvsw61xx.c | ||
| mvsw61xx.h | ||
| mvswitch.c | ||
| mvswitch.h | ||
| psb6970.c | ||
| rtl8306.c | ||
| rtl8366_smi.c | ||
| rtl8366_smi.h | ||
| rtl8366rb.c | ||
| rtl8366s.c | ||
| rtl8367.c | ||
| rtl8367b.c | ||
| swconfig_leds.c | ||
| swconfig.c | ||