DENG Qingfang 1b7199c90c ramips: add support for JCG JHR-AC876M ... JCG JHR-AC876M is an AC2600M router Hardware specs: SoC: MT7621AT 2.4GHz: MT7615N 4x4 @ PCIe0 5GHz: MT7615N 4x4 @ PCIe1 Flash: Winbond W25Q128JVSQ 16MiB RAM: Nanya NT5CB128M16 256MiB USB 2.0 and 3.0 ports 6 LEDs, 3 of which are connected to SoC GPIO Reset and WPS buttons Flash instructions: Stock to OpenWrt: Upload factory.bin in stock firmware's upgrade page, do not preserve settings OpenWrt to stock: Push and hold the reset button for 5s while power cycling to enter recovery mode; Visit 192.168.1.1 and upload stock firmware MAC addresses map: 0x0004 *:1c wlan2g/wan/label 0x8004 *:20 wlan5g 0xe000 *:1b lan 0xe006 *:1a not used in stock fw Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>		2019-12-13 19:43:47 +01:00
..
imagebuilder	target/imagebuilder: use multi-thread support for xz compression	2019-10-09 09:13:44 +02:00
linux	ramips: add support for JCG JHR-AC876M	2019-12-13 19:43:47 +01:00
sdk	sdk: use bundle-libraries.sh to ship kernel objtool tools	2019-09-03 10:45:25 +02:00
toolchain	target/toolchain/files/wrapper.sh: simplify 'case'	2019-07-15 19:29:08 +02:00
Config.in	build: add a config option for enabling a testing version of the target kernel	2019-05-11 11:37:10 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00