mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-11-03 14:34:27 -05:00
42a37b2a89
Corrected patch ath79 insted of auth79. Sorry. Signed-off-by: Fredrik Jonson <fredrik@famjonson.se> SVN-Revision: 41596
133 lines
3.5 KiB
C
133 lines
3.5 KiB
C
/*
|
|
* TP-LINK TL-WA830RE v2 board support
|
|
*
|
|
* Copyright (C) 2014 Fredrik Jonson <fredrik@famjonson.se>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define TL_WA830REV2_GPIO_LED_WLAN 13
|
|
#define TL_WA830REV2_GPIO_LED_QSS 15
|
|
#define TL_WA830REV2_GPIO_LED_LAN 18
|
|
#define TL_WA830REV2_GPIO_LED_SYSTEM 14
|
|
|
|
#define TL_WA830REV2_GPIO_BTN_RESET 17
|
|
#define TL_WA830REV2_GPIO_SW_RFKILL 16 /* WPS for MR3420 v2 */
|
|
|
|
#define TL_WA830REV2_GPIO_USB_POWER 4
|
|
|
|
#define TL_WA830REV2_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA830REV2_KEYS_POLL_INTERVAL)
|
|
|
|
static const char *tl_wa830re_v2_part_probes[] = {
|
|
"tp-link",
|
|
NULL,
|
|
};
|
|
|
|
static struct flash_platform_data tl_wa830re_v2_flash_data = {
|
|
.part_probes = tl_wa830re_v2_part_probes,
|
|
};
|
|
|
|
static struct gpio_led tl_wa830re_v2_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "tp-link:green:qss",
|
|
.gpio = TL_WA830REV2_GPIO_LED_QSS,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "tp-link:green:system",
|
|
.gpio = TL_WA830REV2_GPIO_LED_SYSTEM,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "tp-link:green:lan",
|
|
.gpio = TL_WA830REV2_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "tp-link:green:wlan",
|
|
.gpio = TL_WA830REV2_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button tl_wa830re_v2_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = TL_WA830REV2_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "RFKILL switch",
|
|
.type = EV_SW,
|
|
.code = KEY_RFKILL,
|
|
.debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = TL_WA830REV2_GPIO_SW_RFKILL,
|
|
.active_low = 0,
|
|
}
|
|
};
|
|
|
|
static void __init tl_ap123_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
|
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
|
|
/* Disable JTAG, enabling GPIOs 0-3 */
|
|
/* Configure OBS4 line, for GPIO 4*/
|
|
ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
|
|
AR934X_GPIO_FUNC_CLK_OBS4_EN);
|
|
|
|
/* config gpio4 as normal gpio function */
|
|
ath79_gpio_output_select(TL_WA830REV2_GPIO_USB_POWER,
|
|
AR934X_GPIO_OUT_GPIO);
|
|
|
|
ath79_register_m25p80(&tl_wa830re_v2_flash_data);
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
|
|
|
/* GMAC0 is connected to the PHY0 of the internal switch */
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = BIT(0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_wmac(ee, mac);
|
|
}
|
|
|
|
static void __init tl_wa830re_v2_setup(void)
|
|
{
|
|
tl_ap123_setup();
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa830re_v2_leds_gpio) - 1,
|
|
tl_wa830re_v2_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(1, TL_WA830REV2_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(tl_wa830re_v2_gpio_keys),
|
|
tl_wa830re_v2_gpio_keys);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_TL_WA830RE_V2, "TL-WA830RE-v2", "TP-LINK TL-WA830RE v2",
|
|
tl_wa830re_v2_setup);
|