Rafał Miłecki 351a2ec15f bcm53xx: use USB patches sent upstream by Hauke ... This stabilizes USB support. The old patch was handling initialization in a different order that was causing some problems with few USB 3.0 devices. Some weren't detected, some were working unstable, sometimes USB 3.0 could hang the whole controller. A still known issue (but not a regression) is controller hang triggered by connecting USB 1.1 device when not having OHCI controller enabled (kmod-usb-ohci). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45997		2015-06-16 08:28:46 +00:00
..
adm5120	adm5120: fix subtarget dependency for kmod-pata-rb153-cf	2015-05-28 09:06:28 +00:00
adm8668	adm8668: drop 3.14	2015-04-11 10:28:06 +00:00
ar7	ar7: fix imagebuilder	2015-05-28 13:45:33 +00:00
ar71xx	ar71xx/image: move ubnt images to new BuildCode	2015-06-15 07:46:05 +00:00
arm64	arm64: use common image prefix	2015-05-27 14:57:38 +00:00
at91	at91: fix imagebuilder	2015-05-28 13:25:21 +00:00
ath25	ath25: set myself as maintainer	2015-03-13 03:02:34 +00:00
au1000	au1000: add a missing dependency to the pcmcia module	2015-06-01 06:03:52 +00:00
bcm53xx	bcm53xx: use USB patches sent upstream by Hauke	2015-06-16 08:28:46 +00:00
brcm47xx	brcm47xx: backport BCM47XX patches (NVRAM & BCMA_HOST_PCI)	2015-06-10 19:52:07 +00:00
brcm63xx	brcm63xx: fix A4001N image padding size	2015-06-11 12:10:43 +00:00
brcm2708	brcm2708: fix imagebuilder	2015-05-29 11:28:54 +00:00
cns3xxx	cns3xxx: use common image prefix	2015-05-27 15:18:29 +00:00
gemini	gemini: fix imagebuilder	2015-05-29 11:28:33 +00:00
generic	kernel: add missing config symbol (#19870)	2015-06-15 21:16:15 +00:00
imx6	kernel: update 3.18 to 3.18.14	2015-05-21 19:32:46 +00:00
ipq806x	kernel: move a symbol from the ipq806x config to generic to prevent it from being nuked by make kernel_oldconfig	2015-06-07 07:32:35 +00:00
ixp4xx	ixp4xx: use usb-*-pci where appropriate	2015-05-29 14:39:12 +00:00
kirkwood	kirkwood: disable TSO on the ethernet device by default, fixes data corruption issues (#19735)	2015-05-27 14:56:13 +00:00
lantiq	lantiq: Backport gpio-stp-xway to fix the highest bits of the PHY LEDs	2015-06-05 14:11:51 +00:00
malta	malta: add default network configuration	2015-05-31 17:45:43 +00:00
mcs814x	kernel: update 3.18 to 3.18.14	2015-05-21 19:32:46 +00:00
mpc85xx	mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig	2015-05-25 21:15:37 +00:00
mvebu	mvebu: make flashing more safe	2015-05-27 19:03:22 +00:00
mxs	mxs: fix imagebuilder	2015-05-29 08:42:50 +00:00
netlogic	netlogic: copy initramfs image to $(BIN_DIR)	2015-04-23 22:31:36 +00:00
octeon	octeon: fix imagebuilder	2015-05-29 11:28:20 +00:00
omap	omap: use common image prefix	2015-05-27 15:34:30 +00:00
omap24xx	omap24xx: Add basic config for linux-4.0	2015-03-19 18:45:32 +00:00
orion	kernel: disable INET_LRO by default	2015-04-28 13:31:08 +00:00
oxnas	oxnas: change file extension of u-boot+initramfs image	2015-06-14 17:42:00 +00:00
ppc40x	ppc40x: upgrade to 3.18	2015-04-12 20:48:13 +00:00
ppc44x	ppc44x: use the mtdsplit framework for the Taishan	2015-03-11 12:20:03 +00:00
pxa	kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED	2015-03-06 07:56:34 +00:00
ramips	ramips: fix Power LED handling for WHR-300HP2, WHR-600D, WHR-1166D	2015-06-08 12:51:13 +00:00
rb532	kernel: update 3.18 to 3.18.14	2015-05-21 19:32:46 +00:00
realview	realview: use common image prefix	2015-05-27 15:34:38 +00:00
sunxi	sunxi: correct default package selection, fixes imagebuilder	2015-05-29 13:55:26 +00:00
uml	uml: remove linux 3.14 support	2015-03-28 13:20:52 +00:00
x86	x86/64: add e1000e to the default packages	2015-05-29 08:20:58 +00:00
xburst	xburst: fix imagebuilder	2015-05-28 12:25:45 +00:00
Makefile