Adrian Schmutzler 18c95c9d6e ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2 ... This adds a pinmux to the shared DTSI for TP-Link TL-WR841N/ND v8, TL-WR842N v2 and TL-MR3420 v2. It is supposed to be the equivalent of: /* config gpio4 as normal gpio function */ ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER,AR934X_GPIO_OUT_GPIO); This allows to enable USB power on these devices. While at it, move the jtag_disable_pins to &gpio node and remove the redundant status=okay there. Tested on TP-Link TL-WR842N v2. Fixes: FS#2753 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Armin Fuerst <armin@fuerst.priv.at>		2020-02-18 21:23:17 +01:00
..
base-files	ath79: move mikrotik-caldata.sh to target base-files	2020-02-17 20:23:59 +01:00
dts	ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2	2020-02-18 21:23:17 +01:00
files	ath79: ag71xx: use netif_receive_skb_list on 4.19	2020-02-07 10:58:01 +08:00
generic	ath79: move mikrotik-caldata.sh to target base-files	2020-02-17 20:23:59 +01:00
image	ath79: add support for Siemens WS-AP3610	2020-02-16 15:36:29 +01:00
nand	ath79: add support for Netgear WNDR4500 v3	2020-01-15 20:56:05 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.167	2020-01-24 13:14:33 +01:00
patches-4.19	ath79: backport phy reset-controller patches	2020-02-16 15:36:29 +01:00
tiny	ath79: add support for TP-Link TL-WR940N v6	2020-02-13 17:33:20 +01:00
config-4.14	ath79: enable PCI for whole target	2019-10-27 18:02:55 +01:00
config-4.19	ath79: add new ar934x spi driver	2020-02-06 22:53:03 +08:00
Makefile	treewide: kernel: bump some targets to 4.19	2019-06-18 16:08:55 +02:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00