mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-31 05:54:26 -04:00
1099 lines
36 KiB
Plaintext
1099 lines
36 KiB
Plaintext
# DO NOT EDIT. This file is generated from Config.src
|
|
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see scripts/kbuild/config-language.txt.
|
|
#
|
|
|
|
menu "Networking Utilities"
|
|
|
|
config BUSYBOX_CONFIG_NAMEIF
|
|
bool "nameif"
|
|
default BUSYBOX_DEFAULT_NAMEIF
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
select BUSYBOX_CONFIG_FEATURE_SYSLOG
|
|
help
|
|
nameif is used to rename network interface by its MAC address.
|
|
Renamed interfaces MUST be in the down state.
|
|
It is possible to use a file (default: /etc/mactab)
|
|
with list of new interface names and MACs.
|
|
Maximum interface name length: IFNAMSIZ = 16
|
|
File fields are separated by space or tab.
|
|
File format:
|
|
# Comment
|
|
new_interface_name XX:XX:XX:XX:XX:XX
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
|
|
bool "Extended nameif"
|
|
default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED
|
|
depends on BUSYBOX_CONFIG_NAMEIF
|
|
help
|
|
This extends the nameif syntax to support the bus_info, driver,
|
|
phyaddr selectors. The syntax is compatible to the normal nameif.
|
|
File format:
|
|
new_interface_name driver=asix bus=usb-0000:00:08.2-3
|
|
new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
|
|
new_interface_name phy_address=2 00:80:C8:38:91:B5
|
|
new_interface_name mac=00:80:C8:38:91:B5
|
|
new_interface_name 00:80:C8:38:91:B5
|
|
config BUSYBOX_CONFIG_NBDCLIENT
|
|
bool "nbd-client"
|
|
default BUSYBOX_DEFAULT_NBDCLIENT
|
|
help
|
|
Network block device client
|
|
config BUSYBOX_CONFIG_NC
|
|
bool "nc"
|
|
default BUSYBOX_DEFAULT_NC
|
|
help
|
|
A simple Unix utility which reads and writes data across network
|
|
connections.
|
|
|
|
config BUSYBOX_CONFIG_NC_SERVER
|
|
bool "Netcat server options (-l)"
|
|
default BUSYBOX_DEFAULT_NC_SERVER
|
|
depends on BUSYBOX_CONFIG_NC
|
|
help
|
|
Allow netcat to act as a server.
|
|
|
|
config BUSYBOX_CONFIG_NC_EXTRA
|
|
bool "Netcat extensions (-eiw and -f FILE)"
|
|
default BUSYBOX_DEFAULT_NC_EXTRA
|
|
depends on BUSYBOX_CONFIG_NC
|
|
help
|
|
Add -e (support for executing the rest of the command line after
|
|
making or receiving a successful connection), -i (delay interval for
|
|
lines sent), -w (timeout for initial connection).
|
|
|
|
config BUSYBOX_CONFIG_NC_110_COMPAT
|
|
bool "Netcat 1.10 compatibility (+2.5k)"
|
|
default BUSYBOX_DEFAULT_NC_110_COMPAT # off specially for Rob
|
|
depends on BUSYBOX_CONFIG_NC
|
|
help
|
|
This option makes nc closely follow original nc-1.10.
|
|
The code is about 2.5k bigger. It enables
|
|
-s ADDR, -n, -u, -v, -o FILE, -z options, but loses
|
|
busybox-specific extensions: -f FILE.
|
|
config BUSYBOX_CONFIG_PING
|
|
bool "ping"
|
|
default BUSYBOX_DEFAULT_PING
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
|
|
elicit an ICMP ECHO_RESPONSE from a host or gateway.
|
|
|
|
config BUSYBOX_CONFIG_PING6
|
|
bool "ping6"
|
|
default BUSYBOX_DEFAULT_PING6
|
|
depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
|
|
help
|
|
This will give you a ping that can talk IPv6.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_FANCY_PING
|
|
bool "Enable fancy ping output"
|
|
default BUSYBOX_DEFAULT_FEATURE_FANCY_PING
|
|
depends on BUSYBOX_CONFIG_PING
|
|
help
|
|
Make the output from the ping applet include statistics, and at the
|
|
same time provide full support for ICMP packets.
|
|
config BUSYBOX_CONFIG_WHOIS
|
|
bool "whois"
|
|
default BUSYBOX_DEFAULT_WHOIS
|
|
help
|
|
whois is a client for the whois directory service
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IPV6
|
|
bool "Enable IPv6 support"
|
|
default BUSYBOX_DEFAULT_FEATURE_IPV6
|
|
help
|
|
Enable IPv6 support in busybox.
|
|
This adds IPv6 support in the networking applets.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
|
|
bool "Enable Unix domain socket support (usually not needed)"
|
|
default BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL
|
|
help
|
|
Enable Unix domain socket support in all busybox networking
|
|
applets. Address of the form local:/path/to/unix/socket
|
|
will be recognized.
|
|
|
|
This extension is almost never used in real world usage.
|
|
You most likely want to say N.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
|
|
bool "Prefer IPv4 addresses from DNS queries"
|
|
default BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS
|
|
depends on BUSYBOX_CONFIG_FEATURE_IPV6
|
|
help
|
|
Use IPv4 address of network host if it has one.
|
|
|
|
If this option is off, the first returned address will be used.
|
|
This may cause problems when your DNS server is IPv6-capable and
|
|
is returning IPv6 host addresses too. If IPv6 address
|
|
precedes IPv4 one in DNS reply, busybox network applets
|
|
(e.g. wget) will use IPv6 address. On an IPv6-incapable host
|
|
or network applets will fail to connect to the host
|
|
using IPv6 address.
|
|
|
|
config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
|
|
bool "Verbose resolution errors"
|
|
default BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS
|
|
help
|
|
Enable if you are not satisfied with simplistic
|
|
"can't resolve 'hostname.com'" and want to know more.
|
|
This may increase size of your executable a bit.
|
|
|
|
config BUSYBOX_CONFIG_ARP
|
|
bool "arp"
|
|
default BUSYBOX_DEFAULT_ARP
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Manipulate the system ARP cache.
|
|
|
|
config BUSYBOX_CONFIG_ARPING
|
|
bool "arping"
|
|
default BUSYBOX_DEFAULT_ARPING
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Ping hosts by ARP packets.
|
|
|
|
config BUSYBOX_CONFIG_BRCTL
|
|
bool "brctl"
|
|
default BUSYBOX_DEFAULT_BRCTL
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Manage ethernet bridges.
|
|
Supports addbr/delbr and addif/delif.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
|
|
bool "Fancy options"
|
|
default BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY
|
|
depends on BUSYBOX_CONFIG_BRCTL
|
|
help
|
|
Add support for extended option like:
|
|
setageing, setfd, sethello, setmaxage,
|
|
setpathcost, setportprio, setbridgeprio,
|
|
stp
|
|
This adds about 600 bytes.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
|
|
bool "Support show"
|
|
default BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW
|
|
depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
|
|
help
|
|
Add support for option which prints the current config:
|
|
show
|
|
|
|
config BUSYBOX_CONFIG_DNSD
|
|
bool "dnsd"
|
|
default BUSYBOX_DEFAULT_DNSD
|
|
help
|
|
Small and static DNS server daemon.
|
|
|
|
config BUSYBOX_CONFIG_ETHER_WAKE
|
|
bool "ether-wake"
|
|
default BUSYBOX_DEFAULT_ETHER_WAKE
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Send a magic packet to wake up sleeping machines.
|
|
|
|
config BUSYBOX_CONFIG_FAKEIDENTD
|
|
bool "fakeidentd"
|
|
default BUSYBOX_DEFAULT_FAKEIDENTD
|
|
select BUSYBOX_CONFIG_FEATURE_SYSLOG
|
|
help
|
|
fakeidentd listens on the ident port and returns a predefined
|
|
fake value on any query.
|
|
|
|
config BUSYBOX_CONFIG_FTPD
|
|
bool "ftpd"
|
|
default BUSYBOX_DEFAULT_FTPD
|
|
help
|
|
simple FTP daemon. You have to run it via inetd.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
|
|
bool "Enable upload commands"
|
|
default BUSYBOX_DEFAULT_FEATURE_FTP_WRITE
|
|
depends on BUSYBOX_CONFIG_FTPD
|
|
help
|
|
Enable all kinds of FTP upload commands (-w option)
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
|
|
bool "Enable workaround for RFC-violating clients"
|
|
default BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST
|
|
depends on BUSYBOX_CONFIG_FTPD
|
|
help
|
|
Some ftp clients (among them KDE's Konqueror) issue illegal
|
|
"LIST -l" requests. This option works around such problems.
|
|
It might prevent you from listing files starting with "-" and
|
|
it increases the code size by ~40 bytes.
|
|
Most other ftp servers seem to behave similar to this.
|
|
|
|
config BUSYBOX_CONFIG_FTPGET
|
|
bool "ftpget"
|
|
default BUSYBOX_DEFAULT_FTPGET
|
|
help
|
|
Retrieve a remote file via FTP.
|
|
|
|
config BUSYBOX_CONFIG_FTPPUT
|
|
bool "ftpput"
|
|
default BUSYBOX_DEFAULT_FTPPUT
|
|
help
|
|
Store a remote file via FTP.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
|
|
bool "Enable long options in ftpget/ftpput"
|
|
default BUSYBOX_DEFAULT_FEATURE_FTPGETPUT_LONG_OPTIONS
|
|
depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
|
|
help
|
|
Support long options for the ftpget/ftpput applet.
|
|
|
|
config BUSYBOX_CONFIG_HOSTNAME
|
|
bool "hostname"
|
|
default BUSYBOX_DEFAULT_HOSTNAME
|
|
help
|
|
Show or set the system's host name.
|
|
|
|
config BUSYBOX_CONFIG_HTTPD
|
|
bool "httpd"
|
|
default BUSYBOX_DEFAULT_HTTPD
|
|
help
|
|
Serve web pages via an HTTP server.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
|
|
bool "Support 'Ranges:' header"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
Makes httpd emit "Accept-Ranges: bytes" header and understand
|
|
"Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
|
|
downloads, seeking in multimedia players etc.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
|
|
bool "Use sendfile system call"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_USE_SENDFILE
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
When enabled, httpd will use the kernel sendfile() function
|
|
instead of read/write loop.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
|
|
bool "Enable -u <user> option"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
This option allows the server to run as a specific user
|
|
rather than defaulting to the user that starts the server.
|
|
Use of this option requires special privileges to change to a
|
|
different user.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
|
|
bool "Enable Basic http Authentication"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
Utilizes password settings from /etc/httpd.conf for basic
|
|
authentication on a per url basis.
|
|
Example for httpd.conf file:
|
|
/adm:toor:PaSsWd
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
|
|
bool "Support MD5 crypted passwords for http Authentication"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5
|
|
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
|
|
help
|
|
Enables encrypted passwords, and wildcard user/passwords
|
|
in httpd.conf file.
|
|
User '*' means 'any system user name is ok',
|
|
password of '*' means 'use system password for this user'
|
|
Examples:
|
|
/adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
|
|
/adm:root:*
|
|
/wiki:*:*
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
|
|
bool "Support Common Gateway Interface (CGI)"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
This option allows scripts and executables to be invoked
|
|
when specific URLs are requested.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
|
|
bool "Support for running scripts through an interpreter"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
|
|
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
|
|
help
|
|
This option enables support for running scripts through an
|
|
interpreter. Turn this on if you want PHP scripts to work
|
|
properly. You need to supply an additional line in your
|
|
httpd.conf file:
|
|
*.php:/path/to/your/php
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
|
|
bool "Set REMOTE_PORT environment variable for CGI"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
|
|
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
|
|
help
|
|
Use of this option can assist scripts in generating
|
|
references that contain a unique port number.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
|
|
bool "Enable -e option (useful for CGIs written as shell scripts)"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
This option allows html encoding of arbitrary strings for display
|
|
by the browser. Output goes to stdout.
|
|
For example, httpd -e "<Hello World>" produces
|
|
"<Hello World>".
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
|
|
bool "Support for custom error pages"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
This option allows you to define custom error pages in
|
|
the configuration file instead of the default HTTP status
|
|
error pages. For instance, if you add the line:
|
|
E404:/path/e404.html
|
|
in the config file, the server will respond the specified
|
|
'/path/e404.html' file instead of the terse '404 NOT FOUND'
|
|
message.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
|
|
bool "Support for reverse proxy"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
This option allows you to define URLs that will be forwarded
|
|
to another HTTP server. To setup add the following line to the
|
|
configuration file
|
|
P:/url/:http://hostname[:port]/new/path/
|
|
Then a request to /url/myfile will be forwarded to
|
|
http://hostname[:port]/new/path/myfile.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
|
|
bool "Support for GZIP content encoding"
|
|
default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP
|
|
depends on BUSYBOX_CONFIG_HTTPD
|
|
help
|
|
Makes httpd send files using GZIP content encoding if the
|
|
client supports it and a pre-compressed <file>.gz exists.
|
|
|
|
config BUSYBOX_CONFIG_IFCONFIG
|
|
bool "ifconfig"
|
|
default BUSYBOX_DEFAULT_IFCONFIG
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Ifconfig is used to configure the kernel-resident network interfaces.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
|
|
bool "Enable status reporting output (+7k)"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS
|
|
depends on BUSYBOX_CONFIG_IFCONFIG
|
|
help
|
|
If ifconfig is called with no arguments it will display the status
|
|
of the currently active interfaces.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
|
|
bool "Enable slip-specific options \"keepalive\" and \"outfill\""
|
|
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP
|
|
depends on BUSYBOX_CONFIG_IFCONFIG
|
|
help
|
|
Allow "keepalive" and "outfill" support for SLIP. If you're not
|
|
planning on using serial lines, leave this unchecked.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
|
|
bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
|
|
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
|
|
depends on BUSYBOX_CONFIG_IFCONFIG
|
|
help
|
|
Allow the start address for shared memory, start address for I/O,
|
|
and/or the interrupt line used by the specified device.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
|
|
bool "Enable option \"hw\" (ether only)"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW
|
|
depends on BUSYBOX_CONFIG_IFCONFIG
|
|
help
|
|
Set the hardware address of this interface, if the device driver
|
|
supports this operation. Currently, we only support the 'ether'
|
|
class.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
|
|
bool "Set the broadcast automatically"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS
|
|
depends on BUSYBOX_CONFIG_IFCONFIG
|
|
help
|
|
Setting this will make ifconfig attempt to find the broadcast
|
|
automatically if the value '+' is used.
|
|
|
|
config BUSYBOX_CONFIG_IFENSLAVE
|
|
bool "ifenslave"
|
|
default BUSYBOX_DEFAULT_IFENSLAVE
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Userspace application to bind several interfaces
|
|
to a logical interface (use with kernel bonding driver).
|
|
|
|
config BUSYBOX_CONFIG_IFPLUGD
|
|
bool "ifplugd"
|
|
default BUSYBOX_DEFAULT_IFPLUGD
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Network interface plug detection daemon.
|
|
|
|
config BUSYBOX_CONFIG_IFUPDOWN
|
|
bool "ifupdown"
|
|
default BUSYBOX_DEFAULT_IFUPDOWN
|
|
help
|
|
Activate or deactivate the specified interfaces. This applet makes
|
|
use of either "ifconfig" and "route" or the "ip" command to actually
|
|
configure network interfaces. Therefore, you will probably also want
|
|
to enable either IFCONFIG and ROUTE, or enable
|
|
FEATURE_IFUPDOWN_IP and the various IP options. Of
|
|
course you could use non-busybox versions of these programs, so
|
|
against my better judgement (since this will surely result in plenty
|
|
of support questions on the mailing list), I do not force you to
|
|
enable these additional options. It is up to you to supply either
|
|
"ifconfig", "route" and "run-parts" or the "ip" command, either
|
|
via busybox or via standalone utilities.
|
|
|
|
config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
|
|
string "Absolute path to ifstate file"
|
|
default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH
|
|
depends on BUSYBOX_CONFIG_IFUPDOWN
|
|
help
|
|
ifupdown keeps state information in a file called ifstate.
|
|
Typically it is located in /var/run/ifstate, however
|
|
some distributions tend to put it in other places
|
|
(debian, for example, uses /etc/network/run/ifstate).
|
|
This config option defines location of ifstate.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
|
|
bool "Use ip applet"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP
|
|
depends on BUSYBOX_CONFIG_IFUPDOWN
|
|
help
|
|
Use the iproute "ip" command to implement "ifup" and "ifdown", rather
|
|
than the default of using the older 'ifconfig' and 'route' utilities.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
|
|
bool "Use busybox ip applet"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP_BUILTIN
|
|
depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
select BUSYBOX_CONFIG_IP
|
|
select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
|
|
select BUSYBOX_CONFIG_FEATURE_IP_LINK
|
|
select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
|
|
help
|
|
Use the busybox iproute "ip" applet to implement "ifupdown".
|
|
|
|
If left disabled, you must install the full-blown iproute2
|
|
utility or the "ifup" and "ifdown" applets will not work.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
|
|
bool "Use busybox ifconfig and route applets"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
|
|
depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
|
|
select BUSYBOX_CONFIG_IFCONFIG
|
|
select BUSYBOX_CONFIG_ROUTE
|
|
help
|
|
Use the busybox iproute "ifconfig" and "route" applets to
|
|
implement the "ifup" and "ifdown" utilities.
|
|
|
|
If left disabled, you must install the full-blown ifconfig
|
|
and route utilities, or the "ifup" and "ifdown" applets will not
|
|
work.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
|
|
bool "Support for IPv4"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4
|
|
depends on BUSYBOX_CONFIG_IFUPDOWN
|
|
help
|
|
If you want ifup/ifdown to talk IPv4, leave this on.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
|
|
bool "Support for IPv6"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6
|
|
depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
|
|
help
|
|
If you need support for IPv6, turn this option on.
|
|
|
|
### UNUSED
|
|
###config FEATURE_IFUPDOWN_IPX
|
|
### bool "Support for IPX"
|
|
### default y
|
|
### depends on IFUPDOWN
|
|
### help
|
|
### If this option is selected you can use busybox to work with IPX
|
|
### networks.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
|
|
bool "Enable mapping support"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING
|
|
depends on BUSYBOX_CONFIG_IFUPDOWN
|
|
help
|
|
This enables support for the "mapping" stanza, unless you have
|
|
a weird network setup you don't need it.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
|
|
bool "Support for external dhcp clients"
|
|
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP
|
|
depends on BUSYBOX_CONFIG_IFUPDOWN
|
|
help
|
|
This enables support for the external dhcp clients. Clients are
|
|
tried in the following order: dhcpcd, dhclient, pump and udhcpc.
|
|
Otherwise, if udhcpc applet is enabled, it is used.
|
|
Otherwise, ifup/ifdown will have no support for DHCP.
|
|
|
|
config BUSYBOX_CONFIG_INETD
|
|
bool "inetd"
|
|
default BUSYBOX_DEFAULT_INETD
|
|
select BUSYBOX_CONFIG_FEATURE_SYSLOG
|
|
help
|
|
Internet superserver daemon
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
|
|
bool "Support echo service"
|
|
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
|
|
depends on BUSYBOX_CONFIG_INETD
|
|
help
|
|
Echo received data internal inetd service
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
|
|
bool "Support discard service"
|
|
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
|
|
depends on BUSYBOX_CONFIG_INETD
|
|
help
|
|
Internet /dev/null internal inetd service
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
|
|
bool "Support time service"
|
|
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME
|
|
depends on BUSYBOX_CONFIG_INETD
|
|
help
|
|
Return 32 bit time since 1900 internal inetd service
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
|
|
bool "Support daytime service"
|
|
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
|
|
depends on BUSYBOX_CONFIG_INETD
|
|
help
|
|
Return human-readable time internal inetd service
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
|
|
bool "Support chargen service"
|
|
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
|
|
depends on BUSYBOX_CONFIG_INETD
|
|
help
|
|
Familiar character generator internal inetd service
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_INETD_RPC
|
|
bool "Support RPC services"
|
|
default BUSYBOX_DEFAULT_FEATURE_INETD_RPC
|
|
depends on BUSYBOX_CONFIG_INETD
|
|
select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
|
|
help
|
|
Support Sun-RPC based services
|
|
|
|
config BUSYBOX_CONFIG_IP
|
|
bool "ip"
|
|
default BUSYBOX_DEFAULT_IP
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
The "ip" applet is a TCP/IP interface configuration and routing
|
|
utility. You generally don't need "ip" to use busybox with
|
|
TCP/IP.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
|
|
bool "ip address"
|
|
default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS
|
|
depends on BUSYBOX_CONFIG_IP
|
|
help
|
|
Address manipulation support for the "ip" applet.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IP_LINK
|
|
bool "ip link"
|
|
default BUSYBOX_DEFAULT_FEATURE_IP_LINK
|
|
depends on BUSYBOX_CONFIG_IP
|
|
help
|
|
Configure network devices with "ip".
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
|
|
bool "ip route"
|
|
default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE
|
|
depends on BUSYBOX_CONFIG_IP
|
|
help
|
|
Add support for routing table management to "ip".
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
|
|
bool "ip tunnel"
|
|
default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL
|
|
depends on BUSYBOX_CONFIG_IP
|
|
help
|
|
Add support for tunneling commands to "ip".
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IP_RULE
|
|
bool "ip rule"
|
|
default BUSYBOX_DEFAULT_FEATURE_IP_RULE
|
|
depends on BUSYBOX_CONFIG_IP
|
|
help
|
|
Add support for rule commands to "ip".
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
|
|
bool "Support short forms of ip commands"
|
|
default BUSYBOX_DEFAULT_FEATURE_IP_SHORT_FORMS
|
|
depends on BUSYBOX_CONFIG_IP
|
|
help
|
|
Also support short-form of ip <OBJECT> commands:
|
|
ip addr -> ipaddr
|
|
ip link -> iplink
|
|
ip route -> iproute
|
|
ip tunnel -> iptunnel
|
|
ip rule -> iprule
|
|
|
|
Say N unless you desparately need the short form of the ip
|
|
object commands.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
|
|
bool "Support displaying rarely used link types"
|
|
default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS
|
|
depends on BUSYBOX_CONFIG_IP
|
|
help
|
|
If you are not going to use links of type "frad", "econet",
|
|
"bif" etc, you probably don't need to enable this.
|
|
Ethernet, wireless, infrared, ppp/slip, ip tunnelling
|
|
link types are supported without this option selected.
|
|
|
|
config BUSYBOX_CONFIG_IPADDR
|
|
bool
|
|
default BUSYBOX_DEFAULT_IPADDR
|
|
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
|
|
|
|
config BUSYBOX_CONFIG_IPLINK
|
|
bool
|
|
default BUSYBOX_DEFAULT_IPLINK
|
|
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
|
|
|
|
config BUSYBOX_CONFIG_IPROUTE
|
|
bool
|
|
default BUSYBOX_DEFAULT_IPROUTE
|
|
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
|
|
|
|
config BUSYBOX_CONFIG_IPTUNNEL
|
|
bool
|
|
default BUSYBOX_DEFAULT_IPTUNNEL
|
|
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
|
|
|
|
config BUSYBOX_CONFIG_IPRULE
|
|
bool
|
|
default BUSYBOX_DEFAULT_IPRULE
|
|
depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
|
|
|
|
config BUSYBOX_CONFIG_IPCALC
|
|
bool "ipcalc"
|
|
default BUSYBOX_DEFAULT_IPCALC
|
|
help
|
|
ipcalc takes an IP address and netmask and calculates the
|
|
resulting broadcast, network, and host range.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
|
|
bool "Fancy IPCALC, more options, adds 1 kbyte"
|
|
default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY
|
|
depends on BUSYBOX_CONFIG_IPCALC
|
|
help
|
|
Adds the options hostname, prefix and silent to the output of
|
|
"ipcalc".
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
|
|
bool "Enable long options"
|
|
default BUSYBOX_DEFAULT_FEATURE_IPCALC_LONG_OPTIONS
|
|
depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS
|
|
help
|
|
Support long options for the ipcalc applet.
|
|
|
|
config BUSYBOX_CONFIG_NETMSG
|
|
bool "netmsg"
|
|
default BUSYBOX_DEFAULT_NETMSG
|
|
help
|
|
simple program for sending udp broadcast messages
|
|
|
|
config BUSYBOX_CONFIG_NETSTAT
|
|
bool "netstat"
|
|
default BUSYBOX_DEFAULT_NETSTAT
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
netstat prints information about the Linux networking subsystem.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
|
|
bool "Enable wide netstat output"
|
|
default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE
|
|
depends on BUSYBOX_CONFIG_NETSTAT
|
|
help
|
|
Add support for wide columns. Useful when displaying IPv6 addresses
|
|
(-W option).
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
|
|
bool "Enable PID/Program name output"
|
|
default BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG
|
|
depends on BUSYBOX_CONFIG_NETSTAT
|
|
help
|
|
Add support for -p flag to print out PID and program name.
|
|
+700 bytes of code.
|
|
|
|
config BUSYBOX_CONFIG_NSLOOKUP
|
|
bool "nslookup"
|
|
default BUSYBOX_DEFAULT_NSLOOKUP
|
|
help
|
|
nslookup is a tool to query Internet name servers.
|
|
|
|
config BUSYBOX_CONFIG_NTPD
|
|
bool "ntpd"
|
|
default BUSYBOX_DEFAULT_NTPD
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
The NTP client/server daemon.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
|
|
bool "Make ntpd usable as a NTP server"
|
|
default BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER
|
|
depends on BUSYBOX_CONFIG_NTPD
|
|
help
|
|
Make ntpd usable as a NTP server. If you disable this option
|
|
ntpd will be usable only as a NTP client.
|
|
|
|
config BUSYBOX_CONFIG_PSCAN
|
|
bool "pscan"
|
|
default BUSYBOX_DEFAULT_PSCAN
|
|
help
|
|
Simple network port scanner.
|
|
|
|
config BUSYBOX_CONFIG_ROUTE
|
|
bool "route"
|
|
default BUSYBOX_DEFAULT_ROUTE
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Route displays or manipulates the kernel's IP routing tables.
|
|
|
|
config BUSYBOX_CONFIG_SLATTACH
|
|
bool "slattach"
|
|
default BUSYBOX_DEFAULT_SLATTACH
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
slattach is a small utility to attach network interfaces to serial
|
|
lines.
|
|
|
|
#config TC
|
|
# bool "tc"
|
|
# default y
|
|
# help
|
|
# show / manipulate traffic control settings
|
|
#
|
|
#config FEATURE_TC_INGRESS
|
|
# def_bool n
|
|
# depends on TC
|
|
|
|
config BUSYBOX_CONFIG_TCPSVD
|
|
bool "tcpsvd"
|
|
default BUSYBOX_DEFAULT_TCPSVD
|
|
help
|
|
tcpsvd listens on a TCP port and runs a program for each new
|
|
connection.
|
|
|
|
config BUSYBOX_CONFIG_TELNET
|
|
bool "telnet"
|
|
default BUSYBOX_DEFAULT_TELNET
|
|
help
|
|
Telnet is an interface to the TELNET protocol, but is also commonly
|
|
used to test other simple protocols.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
|
|
bool "Pass TERM type to remote host"
|
|
default BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE
|
|
depends on BUSYBOX_CONFIG_TELNET
|
|
help
|
|
Setting this option will forward the TERM environment variable to the
|
|
remote host you are connecting to. This is useful to make sure that
|
|
things like ANSI colors and other control sequences behave.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
|
|
bool "Pass USER type to remote host"
|
|
default BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN
|
|
depends on BUSYBOX_CONFIG_TELNET
|
|
help
|
|
Setting this option will forward the USER environment variable to the
|
|
remote host you are connecting to. This is useful when you need to
|
|
log into a machine without telling the username (autologin). This
|
|
option enables `-a' and `-l USER' arguments.
|
|
|
|
config BUSYBOX_CONFIG_TELNETD
|
|
bool "telnetd"
|
|
default BUSYBOX_DEFAULT_TELNETD
|
|
select BUSYBOX_CONFIG_FEATURE_SYSLOG
|
|
help
|
|
A daemon for the TELNET protocol, allowing you to log onto the host
|
|
running the daemon. Please keep in mind that the TELNET protocol
|
|
sends passwords in plain text. If you can't afford the space for an
|
|
SSH daemon and you trust your network, you may say 'y' here. As a
|
|
more secure alternative, you should seriously consider installing the
|
|
very small Dropbear SSH daemon instead:
|
|
http://matt.ucc.asn.au/dropbear/dropbear.html
|
|
|
|
Note that for busybox telnetd to work you need several things:
|
|
First of all, your kernel needs:
|
|
UNIX98_PTYS=y
|
|
DEVPTS_FS=y
|
|
|
|
Next, you need a /dev/pts directory on your root filesystem:
|
|
|
|
$ ls -ld /dev/pts
|
|
drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
|
|
|
|
Next you need the pseudo terminal master multiplexer /dev/ptmx:
|
|
|
|
$ ls -la /dev/ptmx
|
|
crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
|
|
|
|
Any /dev/ttyp[0-9]* files you may have can be removed.
|
|
Next, you need to mount the devpts filesystem on /dev/pts using:
|
|
|
|
mount -t devpts devpts /dev/pts
|
|
|
|
You need to be sure that busybox has LOGIN and
|
|
FEATURE_SUID enabled. And finally, you should make
|
|
certain that Busybox has been installed setuid root:
|
|
|
|
chown root.root /bin/busybox
|
|
chmod 4755 /bin/busybox
|
|
|
|
with all that done, telnetd _should_ work....
|
|
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
|
|
bool "Support standalone telnetd (not inetd only)"
|
|
default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE
|
|
depends on BUSYBOX_CONFIG_TELNETD
|
|
help
|
|
Selecting this will make telnetd able to run standalone.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
|
|
bool "Support -w SEC option (inetd wait mode)"
|
|
default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT
|
|
depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
|
|
help
|
|
This option allows you to run telnetd in "inet wait" mode.
|
|
Example inetd.conf line (note "wait", not usual "nowait"):
|
|
|
|
telnet stream tcp wait root /bin/telnetd telnetd -w10
|
|
|
|
In this example, inetd passes _listening_ socket_ as fd 0
|
|
to telnetd when connection appears.
|
|
telnetd will wait for connections until all existing
|
|
connections are closed, and no new connections
|
|
appear during 10 seconds. Then it exits, and inetd continues
|
|
to listen for new connections.
|
|
|
|
This option is rarely used. "tcp nowait" is much more usual
|
|
way of running tcp services, including telnetd.
|
|
You most probably want to say N here.
|
|
|
|
config BUSYBOX_CONFIG_TFTP
|
|
bool "tftp"
|
|
default BUSYBOX_DEFAULT_TFTP
|
|
help
|
|
This enables the Trivial File Transfer Protocol client program. TFTP
|
|
is usually used for simple, small transfers such as a root image
|
|
for a network-enabled bootloader.
|
|
|
|
config BUSYBOX_CONFIG_TFTPD
|
|
bool "tftpd"
|
|
default BUSYBOX_DEFAULT_TFTPD
|
|
help
|
|
This enables the Trivial File Transfer Protocol server program.
|
|
It expects that stdin is a datagram socket and a packet
|
|
is already pending on it. It will exit after one transfer.
|
|
In other words: it should be run from inetd in nowait mode,
|
|
or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
|
|
|
|
comment "Common options for tftp/tftpd"
|
|
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TFTP_GET
|
|
bool "Enable 'tftp get' and/or tftpd upload code"
|
|
default BUSYBOX_DEFAULT_FEATURE_TFTP_GET
|
|
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
|
|
help
|
|
Add support for the GET command within the TFTP client. This allows
|
|
a client to retrieve a file from a TFTP server.
|
|
Also enable upload support in tftpd, if tftpd is selected.
|
|
|
|
Note: this option does _not_ make tftpd capable of download
|
|
(the usual operation people need from it)!
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
|
|
bool "Enable 'tftp put' and/or tftpd download code"
|
|
default BUSYBOX_DEFAULT_FEATURE_TFTP_PUT
|
|
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
|
|
help
|
|
Add support for the PUT command within the TFTP client. This allows
|
|
a client to transfer a file to a TFTP server.
|
|
Also enable download support in tftpd, if tftpd is selected.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
|
|
bool "Enable 'blksize' and 'tsize' protocol options"
|
|
default BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE
|
|
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
|
|
help
|
|
Allow tftp to specify block size, and tftpd to understand
|
|
"blksize" and "tsize" options.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
|
|
bool "Enable tftp progress meter"
|
|
default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR
|
|
depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
|
|
help
|
|
Show progress bar.
|
|
|
|
config BUSYBOX_CONFIG_TFTP_DEBUG
|
|
bool "Enable debug"
|
|
default BUSYBOX_DEFAULT_TFTP_DEBUG
|
|
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
|
|
help
|
|
Make tftp[d] print debugging messages on stderr.
|
|
This is useful if you are diagnosing a bug in tftp[d].
|
|
|
|
config BUSYBOX_CONFIG_TRACEROUTE
|
|
bool "traceroute"
|
|
default BUSYBOX_DEFAULT_TRACEROUTE
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Utility to trace the route of IP packets.
|
|
|
|
config BUSYBOX_CONFIG_TRACEROUTE6
|
|
bool "traceroute6"
|
|
default BUSYBOX_DEFAULT_TRACEROUTE6
|
|
depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE
|
|
help
|
|
Utility to trace the route of IPv6 packets.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
|
|
bool "Enable verbose output"
|
|
default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE
|
|
depends on BUSYBOX_CONFIG_TRACEROUTE
|
|
help
|
|
Add some verbosity to traceroute. This includes among other things
|
|
hostnames and ICMP response types.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
|
|
bool "Enable loose source route"
|
|
default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_SOURCE_ROUTE
|
|
depends on BUSYBOX_CONFIG_TRACEROUTE
|
|
help
|
|
Add option to specify a loose source route gateway
|
|
(8 maximum).
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
|
|
bool "Use ICMP instead of UDP"
|
|
default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP
|
|
depends on BUSYBOX_CONFIG_TRACEROUTE
|
|
help
|
|
Add option -I to use ICMP ECHO instead of UDP datagrams.
|
|
|
|
config BUSYBOX_CONFIG_TUNCTL
|
|
bool "tunctl"
|
|
default BUSYBOX_DEFAULT_TUNCTL
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
tunctl creates or deletes tun devices.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
|
|
bool "Support owner:group assignment"
|
|
default BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG
|
|
depends on BUSYBOX_CONFIG_TUNCTL
|
|
help
|
|
Allow to specify owner and group of newly created interface.
|
|
340 bytes of pure bloat. Say no here.
|
|
|
|
source package/utils/busybox/config/networking/udhcp/Config.in
|
|
|
|
config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
|
|
string "ifup udhcpc command line options"
|
|
default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS
|
|
depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC
|
|
help
|
|
Command line options to pass to udhcpc from ifup.
|
|
Intended to alter options not available in /etc/network/interfaces.
|
|
(IE: --syslog --background etc...)
|
|
|
|
config BUSYBOX_CONFIG_UDPSVD
|
|
bool "udpsvd"
|
|
default BUSYBOX_DEFAULT_UDPSVD
|
|
help
|
|
udpsvd listens on an UDP port and runs a program for each new
|
|
connection.
|
|
|
|
config BUSYBOX_CONFIG_VCONFIG
|
|
bool "vconfig"
|
|
default BUSYBOX_DEFAULT_VCONFIG
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
help
|
|
Creates, removes, and configures VLAN interfaces
|
|
|
|
config BUSYBOX_CONFIG_WGET
|
|
bool "wget"
|
|
default BUSYBOX_DEFAULT_WGET
|
|
help
|
|
wget is a utility for non-interactive download of files from HTTP
|
|
and FTP servers.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
|
|
bool "Enable a nifty process meter (+2k)"
|
|
default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR
|
|
depends on BUSYBOX_CONFIG_WGET
|
|
help
|
|
Enable the transfer progress bar for wget transfers.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
|
|
bool "Enable HTTP authentication"
|
|
default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
|
|
depends on BUSYBOX_CONFIG_WGET
|
|
help
|
|
Support authenticated HTTP transfers.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
|
|
bool "Enable long options"
|
|
default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS
|
|
depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
|
|
help
|
|
Support long options for the wget applet.
|
|
|
|
config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
|
|
bool "Enable timeout option -T SEC"
|
|
default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
|
|
depends on BUSYBOX_CONFIG_WGET
|
|
help
|
|
Supports network read and connect timeouts for wget,
|
|
so that wget will give up and timeout, through the -T
|
|
command line option.
|
|
|
|
Currently only connect and network data read timeout are
|
|
supported (i.e., timeout is not applied to the DNS query). When
|
|
FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
|
|
will work in addition to -T.
|
|
|
|
config BUSYBOX_CONFIG_ZCIP
|
|
bool "zcip"
|
|
default BUSYBOX_DEFAULT_ZCIP
|
|
select BUSYBOX_CONFIG_PLATFORM_LINUX
|
|
select BUSYBOX_CONFIG_FEATURE_SYSLOG
|
|
help
|
|
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
|
|
It's a daemon that allocates and defends a dynamically assigned
|
|
address on the 169.254/16 network, requiring no system administrator.
|
|
|
|
See http://www.zeroconf.org for further details, and "zcip.script"
|
|
in the busybox examples.
|
|
|
|
endmenu
|