mirror of
				git://git.openwrt.org/openwrt/openwrt.git
				synced 2025-10-30 21:44:27 -04:00 
			
		
		
		
	
		
			
				
	
	
		
			1379 lines
		
	
	
		
			36 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
			
		
		
	
	
			1379 lines
		
	
	
		
			36 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
| From 771f4741de2cd8a103d96cd1e8281926448ff56d Mon Sep 17 00:00:00 2001
 | |
| From: Kurt Mahan <kmahan@freescale.com>
 | |
| Date: Tue, 15 Jul 2008 11:44:08 -0600
 | |
| Subject: [PATCH] Fix DSPI driver.
 | |
| 
 | |
| Update to latest Matt Coldfire driver.  Fix timing issues with
 | |
| M547x/M548x END-OF-QUEUE notification.
 | |
| 
 | |
| LTIBName: mcfv4e-dspi-update
 | |
| Signed-off-by: Kurt Mahan <kmahan@freescale.com>
 | |
| ---
 | |
|  arch/m68k/coldfire/m547x_8x-devices.c |   35 +-
 | |
|  drivers/spi/Kconfig                   |    6 +
 | |
|  drivers/spi/Makefile                  |    2 +-
 | |
|  drivers/spi/dspi_mcf.c                | 1217 +++++++++++++++++++++++++++++++++
 | |
|  include/asm-m68k/mcfdspi.h            |   48 ++
 | |
|  5 files changed, 1296 insertions(+), 12 deletions(-)
 | |
|  create mode 100644 drivers/spi/dspi_mcf.c
 | |
|  create mode 100644 include/asm-m68k/mcfdspi.h
 | |
| 
 | |
| --- a/arch/m68k/coldfire/m547x_8x-devices.c
 | |
| +++ b/arch/m68k/coldfire/m547x_8x-devices.c
 | |
| @@ -26,26 +26,40 @@
 | |
|   */
 | |
|  
 | |
|  /* number of supported SPI selects */
 | |
| -#define SPI_NUM_CHIPSELECTS	4
 | |
| +#define SPI_NUM_CHIPSELECTS	8
 | |
|  
 | |
|  void coldfire_spi_cs_control(u8 cs, u8 command)
 | |
|  {
 | |
|  	/* nothing special required */
 | |
|  }
 | |
|  
 | |
| +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 | |
| +static struct coldfire_spi_chip spidev_chip_info = {
 | |
| +	.bits_per_word = 8,
 | |
| +};
 | |
| +#endif
 | |
| +
 | |
|  static struct spi_board_info spi_board_info[] = {
 | |
| -	/* no board info */
 | |
| +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 | |
| +	{
 | |
| +		.modalias = "spidev",
 | |
| +		.max_speed_hz = 16000000,  	/* max clk (SCK) speed in HZ */
 | |
| +		.bus_num = 1,
 | |
| +		.chip_select = 0,		/* CS0 */
 | |
| +		.controller_data = &spidev_chip_info,
 | |
| + 	}
 | |
| +#endif
 | |
|  };
 | |
|  
 | |
|  static int spi_irq_list[] = {
 | |
| -	/* IRQ, ICR Offset, ICR Val, Mask */
 | |
| -	64 + ISC_DSPI_OVRFW, 0, 0, 0,
 | |
| -	64 + ISC_DSPI_RFOF,  0, 0, 0,
 | |
| -	64 + ISC_DSPI_RFDF,  0, 0, 0,
 | |
| -	64 + ISC_DSPI_TFUF,  0, 0, 0,
 | |
| -	64 + ISC_DSPI_TCF,   0, 0, 0,
 | |
| -	64 + ISC_DSPI_TFFF,  0, 0, 0,
 | |
| -	64 + ISC_DSPI_EOQF,  0, 0, 0,
 | |
| +	/* IRQ, 	     ICR Offset, 	ICR Val,Mask */
 | |
| +	64 + ISC_DSPI_OVRFW, ISC_DSPI_OVRFW,	0x18, 	0,
 | |
| +	64 + ISC_DSPI_RFOF,  ISC_DSPI_RFOF,	0x18, 	0,
 | |
| +	64 + ISC_DSPI_RFDF,  ISC_DSPI_RFDF,	0x18, 	0,
 | |
| +	64 + ISC_DSPI_TFUF,  ISC_DSPI_TFUF,	0x18, 	0,
 | |
| +	64 + ISC_DSPI_TCF,   ISC_DSPI_TCF,	0x18, 	0,
 | |
| +	64 + ISC_DSPI_TFFF,  ISC_DSPI_TFFF,	0x18, 	0,
 | |
| +	64 + ISC_DSPI_EOQF,  ISC_DSPI_EOQF,	0x18, 	0,
 | |
|  	0,0,0,0,
 | |
|  };
 | |
|  
 | |
| @@ -120,7 +134,6 @@ static int __init m547x_8x_spi_init(void
 | |
|  	/* register device */
 | |
|  	retval = platform_device_register(&coldfire_spi);
 | |
|  	if (retval < 0) {
 | |
| -		printk(KERN_ERR "SPI-m547x_8x: platform_device_register failed with code=%d\n", retval);
 | |
|  		goto out;
 | |
|  	}
 | |
|  
 | |
| --- a/drivers/spi/Kconfig
 | |
| +++ b/drivers/spi/Kconfig
 | |
| @@ -130,6 +130,12 @@ config SPI_COLDFIRE
 | |
|  	  Tested with the 5282 processor, but should also work with other
 | |
|  	  Coldfire variants.
 | |
|  
 | |
| +config SPI_DSPI
 | |
| +	tristate "Coldfire DSPI"
 | |
| +	depends on SPI_MASTER && COLDFIRE
 | |
| +	help
 | |
| +	  SPI driver for Coldfire DSPI driver only.
 | |
| +
 | |
|  config SPI_COLDFIRE_DSPI_EDMA	  
 | |
|  	boolean "Coldfire DSPI master driver uses eDMA"
 | |
|  	depends on SPI_MASTER && COLDFIRE && SPI_COLDFIRE && EXPERIMENTAL && COLDFIRE_EDMA
 | |
| --- a/drivers/spi/Makefile
 | |
| +++ b/drivers/spi/Makefile
 | |
| @@ -19,7 +19,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitban
 | |
|  obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 | |
|  obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
 | |
|  # obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o spi-m5445x.o
 | |
| -obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o
 | |
| +obj-$(CONFIG_SPI_DSPI)			+= dspi_mcf.o
 | |
|  obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
 | |
|  obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 | |
|  obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
 | |
| --- /dev/null
 | |
| +++ b/drivers/spi/dspi_mcf.c
 | |
| @@ -0,0 +1,1217 @@
 | |
| +/*
 | |
| + * dspi_mcf.c - DSPI controller for ColdFire processors
 | |
| + *
 | |
| + *
 | |
| + *      Matt Waddel Matt.Waddel@freescale.com
 | |
| + *      Copyright Freescale Semiconductor, Inc. 2008
 | |
| + *
 | |
| + * 	M547x/M548x changes by Kurt Mahan kmahan@freescale.com
 | |
| + *      Copyright Freescale Semiconductor, Inc. 2008
 | |
| + *
 | |
| + *      Based on spi_coldfire.c done by:
 | |
| + *              Andrey Butok
 | |
| + *              Yaroslav Vinogradov
 | |
| + *              Copyright Freescale Semiconductor, Inc. 2006-2007
 | |
| + *              Mike Lavender (mike@steroidmicros)
 | |
| + *              (C) Copyright 2005, Intec Automation,
 | |
| + *
 | |
| + * This program is free software; you can redistribute  it and/or modify it
 | |
| + * under  the terms of  the GNU General  Public License as published by the
 | |
| + * Free Software Foundation;  either version 2 of the  License, or (at your
 | |
| + * option) any later version.
 | |
| + *
 | |
| + * This program is distributed in the hope that it will be useful,
 | |
| + * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
| + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
| + * GNU General Public License for more details.
 | |
| + *
 | |
| + * You should have received a copy of the GNU General Public License
 | |
| + * along with this program; if not, write to the Free Software
 | |
| + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 | |
| + *
 | |
| + ***************************************************************************
 | |
| + * Changes:
 | |
| + *   v0.002	M547x/M548x support.
 | |
| + *   v0.001	Initial version. Coldfire DSPI master driver.
 | |
| + ****************************************************************************/
 | |
| +
 | |
| +/*
 | |
| + * Includes
 | |
| + */
 | |
| +
 | |
| +#include <linux/autoconf.h>
 | |
| +#include <linux/init.h>
 | |
| +#include <linux/module.h>
 | |
| +#include <linux/device.h>
 | |
| +#include <linux/interrupt.h>
 | |
| +#include <linux/platform_device.h>
 | |
| +#include <linux/spi/spi.h>
 | |
| +#include <linux/workqueue.h>
 | |
| +#include <linux/delay.h>
 | |
| +#include <asm/mcfsim.h>
 | |
| +#include <asm/mcfqspi.h>
 | |
| +#include <asm/coldfire.h>
 | |
| +#include <linux/io.h>
 | |
| +#include <asm/mcfdspi.h>
 | |
| +#include <linux/dma-mapping.h>
 | |
| +
 | |
| +#undef DSPI_COLDFIRE_DEBUG
 | |
| +
 | |
| +#ifdef DSPI_COLDFIRE_DEBUG
 | |
| +#define DBG(fmt, args...) \
 | |
| +	printk(KERN_INFO "[%s]  " fmt , __FUNCTION__, ## args)
 | |
| +#else
 | |
| +#define DBG(fmt, args...)	do {} while (0)
 | |
| +#endif
 | |
| +
 | |
| +#if defined(CONFIG_M54455)
 | |
| +#include <asm/mcf5445x_dspi.h>
 | |
| +#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
 | |
| +	#include <asm/mcf5445x_edma.h>
 | |
| +#endif
 | |
| +#endif
 | |
| +
 | |
| +#if defined(CONFIG_M547X_8X)
 | |
| +#include <asm/virtconvert.h>
 | |
| +#include <asm/m5485dspi.h>
 | |
| +#endif
 | |
| +
 | |
| +#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
 | |
| +#include <asm/mcf_edma.h>
 | |
| +#define SPI_DSPI_EDMA
 | |
| +#define EDMA_BUFSIZE_KMALLOC	(DSPI_FIFO_SIZE*4)
 | |
| +#define DSPI_DMA_RX_TCD		MCF_EDMA_CHAN_DSPI_RX
 | |
| +#define DSPI_DMA_TX_TCD 	MCF_EDMA_CHAN_DSPI_TX
 | |
| +#endif
 | |
| +
 | |
| +#define DSPI_BITS	MCF_DSPI_DCTAR_FMSZ(0xF)
 | |
| +#define DSPI_BITS_16	MCF_DSPI_DCTAR_FMSZ(0xF)
 | |
| +#define DSPI_BITS_8	MCF_DSPI_DCTAR_FMSZ(0x7)
 | |
| +#define DSPI_FIFO_SIZE	16
 | |
| +
 | |
| +#define DRIVER_NAME "Coldfire DSPI"
 | |
| +
 | |
| +/****************************************************************************/
 | |
| +
 | |
| +/*
 | |
| + * Local constants and macros
 | |
| + */
 | |
| +
 | |
| +#define START_STATE ((void *)0)
 | |
| +#define RUNNING_STATE ((void *)1)
 | |
| +#define DONE_STATE ((void *)2)
 | |
| +#define ERROR_STATE ((void *)-1)
 | |
| +
 | |
| +#define QUEUE_RUNNING 0
 | |
| +#define QUEUE_STOPPED 1
 | |
| +
 | |
| +/****************************************************************************/
 | |
| +
 | |
| +/*
 | |
| + * Local Data Structures
 | |
| + */
 | |
| +
 | |
| +struct DSPI_MCR {
 | |
| +	unsigned master:1;
 | |
| +	unsigned cont_scke:1;
 | |
| +	unsigned dconf:2;
 | |
| +	unsigned frz:1;
 | |
| +	unsigned mtfe:1;
 | |
| +	unsigned pcsse:1;
 | |
| +	unsigned rooe:1;
 | |
| +	unsigned pcsis:8;
 | |
| +	unsigned reserved15:1;
 | |
| +	unsigned mdis:1;
 | |
| +	unsigned dis_tx:1;
 | |
| +	unsigned dis_rxf:1;
 | |
| +	unsigned clr_tx:1;
 | |
| +	unsigned clr_rxf:1;
 | |
| +	unsigned smpl_pt:2;
 | |
| +	unsigned reserved71:7;
 | |
| +	unsigned halt:1;
 | |
| +};
 | |
| +
 | |
| +struct DSPI_CTAR {
 | |
| +	unsigned dbr:1;
 | |
| +	unsigned fmsz:4;
 | |
| +	unsigned cpol:1;
 | |
| +	unsigned cpha:1;
 | |
| +	unsigned lsbfe:1;
 | |
| +	unsigned pcssck:2;
 | |
| +	unsigned pasc:2;
 | |
| +	unsigned pdt:2;
 | |
| +	unsigned pbr:2;
 | |
| +	unsigned cssck:4;
 | |
| +	unsigned asc:4;
 | |
| +	unsigned dt:4;
 | |
| +	unsigned br:4;
 | |
| +};
 | |
| +
 | |
| +struct chip_data {
 | |
| +	/* dspi data */
 | |
| +	union {
 | |
| +		u32 mcr_val;
 | |
| +		struct DSPI_MCR mcr;
 | |
| +	};
 | |
| +	union {
 | |
| +		u32 ctar_val;
 | |
| +		struct DSPI_CTAR ctar;
 | |
| +	};
 | |
| +	u16 void_write_data;
 | |
| +};
 | |
| +
 | |
| +
 | |
| +struct driver_data {
 | |
| +	/* Driver model hookup */
 | |
| +	struct platform_device *pdev;
 | |
| +
 | |
| +	/* SPI framework hookup */
 | |
| +	struct spi_master *master;
 | |
| +
 | |
| +	/* Driver message queue */
 | |
| +	struct workqueue_struct	*workqueue;
 | |
| +	struct work_struct pump_messages;
 | |
| +	spinlock_t lock; /* lock */
 | |
| +	struct list_head queue;
 | |
| +	int busy;
 | |
| +	int run;
 | |
| +
 | |
| +	/* Message Transfer pump */
 | |
| +	struct tasklet_struct pump_transfers;
 | |
| +
 | |
| +	/* Current message transfer state info */
 | |
| +	struct spi_message *cur_msg;
 | |
| +	struct spi_transfer *cur_transfer;
 | |
| +	struct chip_data *cur_chip;
 | |
| +	size_t len;
 | |
| +	void *tx;
 | |
| +	void *tx_end;
 | |
| +	void *rx;
 | |
| +	void *rx_end;
 | |
| +	char flags;
 | |
| +#define TRAN_STATE_RX_VOID	   0x01
 | |
| +#define TRAN_STATE_TX_VOID 	   0x02
 | |
| +#define TRAN_STATE_WORD_ODD_NUM	   0x04
 | |
| +	u8 cs;
 | |
| +	u16 void_write_data;
 | |
| +	unsigned cs_change:1;
 | |
| +
 | |
| +	u32 trans_cnt;
 | |
| +	u32 wce_cnt;
 | |
| +	u32 abrt_cnt;
 | |
| +	u32 *mcr;		/* DSPI MCR register */
 | |
| +	u32 *ctar;		/* DSPI CTAR register */
 | |
| +	u32 *dspi_dtfr;		/* DSPI DTFR register */
 | |
| +	u32 *dspi_drfr;		/* DSPI DRFR register */
 | |
| +	u32 *dspi_rser;		/* DSPI RSER register */
 | |
| +	u32 *dspi_sr;		/* DSPI status register */
 | |
| +
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +	void *edma_tx_buf;
 | |
| +	void *edma_rx_buf;
 | |
| +#endif
 | |
| +
 | |
| +#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
 | |
| +	u16 *par;	   /* Pin assignment register */
 | |
| +#else
 | |
| +	u8  *par;	   /* Pin assignment register */
 | |
| +#endif
 | |
| +	u8  *int_icr;	   /* Interrupt level and priority register */
 | |
| +	u32 *int_mr;       /* Interrupt mask register */
 | |
| +	void (*cs_control)(u8 cs, u8 command);
 | |
| +};
 | |
| +
 | |
| +#define DSPI_CS(cs) ((1<<(cs))<<16)
 | |
| +
 | |
| +/****************************************************************************/
 | |
| +
 | |
| +/*
 | |
| + * SPI local functions
 | |
| + */
 | |
| +
 | |
| +static void *next_transfer(struct driver_data *drv_data)
 | |
| +{
 | |
| +	struct spi_message *msg = drv_data->cur_msg;
 | |
| +	struct spi_transfer *trans = drv_data->cur_transfer;
 | |
| +
 | |
| +	DBG("\n");
 | |
| +	/* Move to next transfer */
 | |
| +	if (trans->transfer_list.next != &msg->transfers) {
 | |
| +		drv_data->cur_transfer = list_entry(trans->transfer_list.next,
 | |
| +						    struct spi_transfer,
 | |
| +						    transfer_list);
 | |
| +
 | |
| +		if (drv_data->cur_transfer->transfer_list.next
 | |
| +			== &msg->transfers) /* last transfer */
 | |
| +			drv_data->cur_transfer->cs_change = 1;
 | |
| +
 | |
| +		return RUNNING_STATE;
 | |
| +	} else
 | |
| +		return DONE_STATE;
 | |
| +}
 | |
| +
 | |
| +
 | |
| +static inline int is_word_transfer(struct driver_data *drv_data)
 | |
| +{
 | |
| +	return ((*(drv_data->ctar+drv_data->cs) & DSPI_BITS_16) ==
 | |
| +						  DSPI_BITS_8) ? 0 : 1;
 | |
| +}
 | |
| +
 | |
| +static inline void set_8bit_transfer_mode(struct driver_data *drv_data)
 | |
| +{
 | |
| +	DBG("\n");
 | |
| +	*(drv_data->ctar+drv_data->cs) =
 | |
| +		(*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_8;
 | |
| +}
 | |
| +
 | |
| +static inline void set_16bit_transfer_mode(struct driver_data *drv_data)
 | |
| +{
 | |
| +	DBG("\n");
 | |
| +	*(drv_data->ctar+drv_data->cs) =
 | |
| +		(*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_16;
 | |
| +}
 | |
| +
 | |
| +static unsigned char hz_to_spi_baud(int pbr, int dbr, int speed_hz)
 | |
| +{
 | |
| +	int pbr_tbl[4] = {2, 3, 5, 7}; /* Valid baud rate pre-scaler values */
 | |
| +	int brs[16] = {	2,	4,	6,	8,
 | |
| +			16,	32,	64,	128,
 | |
| +			256,	512,	1024,	2048,
 | |
| +			4096,	8192,	16384,	32768 };
 | |
| +	int temp, index = 0;
 | |
| +
 | |
| +	if ((pbr < 0) || (pbr > 3) ||
 | |
| +	    (dbr < 0) || (dbr > 1))
 | |
| +		return 15; /* table indexes out of range, go slow */
 | |
| +
 | |
| +	temp = ((((MCF_CLK / 2) / pbr_tbl[pbr]) * (1 + dbr)) / speed_hz);
 | |
| +
 | |
| +	while (temp >= brs[index])
 | |
| +		if (index++ >= 15)
 | |
| +			break;
 | |
| +
 | |
| +	DBG("baud rate scaler = 0x%x - %d\n", index, brs[index]);
 | |
| +	return(index);
 | |
| +}
 | |
| +
 | |
| +static int write(struct driver_data *drv_data)
 | |
| +{
 | |
| +	int tx_count = 0;
 | |
| +	int tx_word = is_word_transfer(drv_data);
 | |
| +	u16 d16;
 | |
| +	u8  d8;
 | |
| +	u32 dspi_pushr = 0;
 | |
| +	int first = 1;
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +	u32 *edma_wr = (u32 *)(drv_data->edma_tx_buf);
 | |
| +#endif
 | |
| +
 | |
| +	/* If we are in word mode, but only have a single byte to transfer
 | |
| +	 * then switch to byte mode temporarily.  Will switch back at the
 | |
| +	 * end of the transfer. */
 | |
| +	if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) {
 | |
| +		drv_data->flags |= TRAN_STATE_WORD_ODD_NUM;
 | |
| +		set_8bit_transfer_mode(drv_data);
 | |
| +		tx_word = 0;
 | |
| +	}
 | |
| +
 | |
| +	while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) {
 | |
| +// DBG("while\n");
 | |
| +		if (tx_word) {
 | |
| +			if ((drv_data->tx_end - drv_data->tx) == 1)
 | |
| +				break;
 | |
| +
 | |
| +			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
 | |
| +				d16 = *(u16 *)drv_data->tx;
 | |
| +			else
 | |
| +				d16 = drv_data->void_write_data;
 | |
| +
 | |
| +			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) |
 | |
| +				     DSPI_CS(drv_data->cs) |
 | |
| +				     MCF_DSPI_DTFR_CTAS(drv_data->cs) |
 | |
| +				     MCF_DSPI_DTFR_CONT;
 | |
| +
 | |
| +			drv_data->tx += 2;
 | |
| +		} else {
 | |
| +			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
 | |
| +				d8 = *(u8 *)drv_data->tx;
 | |
| +			else
 | |
| +				d8 = *(u8 *)&drv_data->void_write_data;
 | |
| +
 | |
| +			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) |
 | |
| +				     DSPI_CS(drv_data->cs) |
 | |
| +				     MCF_DSPI_DTFR_CTAS(drv_data->cs) |
 | |
| +				     MCF_DSPI_DTFR_CONT;
 | |
| +
 | |
| +			drv_data->tx++;
 | |
| +		}
 | |
| +
 | |
| +		if (drv_data->tx == drv_data->tx_end
 | |
| +			|| tx_count == DSPI_FIFO_SIZE-1) {
 | |
| +			/* last transfer in the queue */
 | |
| +			dspi_pushr |= MCF_DSPI_DTFR_EOQ;
 | |
| +			if ((drv_data->cs_change)
 | |
| +			 && (drv_data->tx == drv_data->tx_end))
 | |
| +				dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
 | |
| +#ifdef CONFIG_M547X_8X
 | |
| +			/* EOQ gets missed if we don't delay */
 | |
| +			udelay(100);
 | |
| +#endif
 | |
| +		} else if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1))
 | |
| +			dspi_pushr |= MCF_DSPI_DTFR_EOQ;
 | |
| +
 | |
| +		if (first) {
 | |
| +			first = 0;
 | |
| +			dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
 | |
| +		}
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +		*edma_wr = dspi_pushr;
 | |
| +		edma_wr++;
 | |
| +#else
 | |
| +		*drv_data->dspi_dtfr = dspi_pushr;
 | |
| +#endif
 | |
| +		tx_count++;
 | |
| +	}
 | |
| +
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +	if (tx_count > 0) {
 | |
| +
 | |
| +		mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD,
 | |
| +			virt_to_phys(drv_data->edma_tx_buf),
 | |
| +			(u32)drv_data->dspi_dtfr,
 | |
| +			MCF_EDMA_TCD_ATTR_SSIZE_32BIT
 | |
| +			| MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
 | |
| +			4,		/* soff */
 | |
| +			4 * tx_count,	/* nbytes */
 | |
| +			0,		/* slast */
 | |
| +			1,		/* citer */
 | |
| +			1,		/* biter */
 | |
| +			0,		/* doff */
 | |
| +			0,		/* dlastsga */
 | |
| +			0,		/* major_int */
 | |
| +			1);		/* disable_req */
 | |
| +
 | |
| +		mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD,
 | |
| +			(u32)drv_data->dspi_drfr,
 | |
| +			virt_to_phys(drv_data->edma_rx_buf),
 | |
| +			MCF_EDMA_TCD_ATTR_SSIZE_32BIT
 | |
| +			| MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
 | |
| +			0,		/* soff */
 | |
| +			4 * tx_count,	/* nbytes */
 | |
| +			0,		/* slast */
 | |
| +			1,		/* citer */
 | |
| +			1,		/* biter */
 | |
| +			4,		/* doff */
 | |
| +			0,		/* dlastsga */
 | |
| +			0,		/* major_int */
 | |
| +			1);		/* disable_req */
 | |
| +
 | |
| +		mcf_edma_start_transfer(DSPI_DMA_TX_TCD);
 | |
| +	}
 | |
| +#endif
 | |
| +	return (tx_count * (tx_word + 1));
 | |
| +}
 | |
| +
 | |
| +static int read(struct driver_data *drv_data)
 | |
| +{
 | |
| +	int rx_count = 0;
 | |
| +	int rx_word = is_word_transfer(drv_data);
 | |
| +	u16 d;
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +	u32 *rx_edma = (u32 *) drv_data->edma_rx_buf;
 | |
| +
 | |
| +	/* receive SPI data */
 | |
| +	mcf_edma_start_transfer(DSPI_DMA_RX_TCD);
 | |
| +#endif
 | |
| +	while ((drv_data->rx < drv_data->rx_end)
 | |
| +		&& (rx_count < DSPI_FIFO_SIZE)) {
 | |
| +
 | |
| +		if (rx_word) {
 | |
| +			if ((drv_data->rx_end - drv_data->rx) == 1)
 | |
| +				break;
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
 | |
| +			rx_edma++;
 | |
| +#else
 | |
| +			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
 | |
| +#endif
 | |
| +			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
 | |
| +				*(u16 *)drv_data->rx = d;
 | |
| +			drv_data->rx += 2;
 | |
| +
 | |
| +		} else {
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
 | |
| +			rx_edma++;
 | |
| +#else
 | |
| +			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
 | |
| +#endif
 | |
| +			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
 | |
| +				*(u8 *)drv_data->rx = d;
 | |
| +			drv_data->rx++;
 | |
| +		}
 | |
| +		rx_count++;
 | |
| +		DBG("rxd=0x%x\n", d);
 | |
| +	}
 | |
| +	return rx_count;
 | |
| +}
 | |
| +
 | |
| +
 | |
| +static inline void dspi_setup_chip(struct driver_data *drv_data)
 | |
| +{
 | |
| +	struct chip_data *chip = drv_data->cur_chip;
 | |
| +
 | |
| +	DBG("\n");
 | |
| +	*drv_data->mcr = chip->mcr_val;
 | |
| +	*(drv_data->ctar+drv_data->cs) = chip->ctar_val;
 | |
| +	*drv_data->dspi_rser =  MCF_DSPI_DRSER_EOQFE;
 | |
| +}
 | |
| +
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +static int edma_tx_handler(int channel, void *dev)
 | |
| +{
 | |
| +	DBG("\n");
 | |
| +	if (channel == DSPI_DMA_TX_TCD)
 | |
| +		mcf_edma_stop_transfer(DSPI_DMA_TX_TCD);
 | |
| +	return IRQ_HANDLED;
 | |
| +}
 | |
| +
 | |
| +static int edma_rx_handler(int channel, void *dev)
 | |
| +{
 | |
| +	DBG("\n");
 | |
| +	if (channel == DSPI_DMA_RX_TCD)
 | |
| +		mcf_edma_stop_transfer(DSPI_DMA_RX_TCD);
 | |
| +	return IRQ_HANDLED;
 | |
| +}
 | |
| +#endif
 | |
| +
 | |
| +static irqreturn_t dspi_interrupt(int irq, void *dev_id)
 | |
| +{
 | |
| +	struct driver_data *drv_data = (struct driver_data *)dev_id;
 | |
| +	struct spi_message *msg = drv_data->cur_msg;
 | |
| +
 | |
| +	/* Clear all flags immediately */
 | |
| +	*drv_data->dspi_sr = MCF_DSPI_DSR_EOQF;
 | |
| +
 | |
| +	if (!drv_data->cur_msg || !drv_data->cur_msg->state) {
 | |
| +#if !defined(SPI_DSPI_EDMA)
 | |
| +		u32 irq_status = *drv_data->dspi_sr;
 | |
| +		/* if eDMA is used it happens some time (at least once)*/
 | |
| +		printk(KERN_ERR "Bad message or transfer state handler. \
 | |
| +				 IRQ status = %x\n", irq_status);
 | |
| +#endif
 | |
| +		return IRQ_NONE;
 | |
| +	}
 | |
| +
 | |
| +	DBG("\n");
 | |
| +	/*
 | |
| +	 * Read the data into the buffer and reload and start
 | |
| +	 * queue with new data if not finished.  If finished
 | |
| +	 * then setup the next transfer
 | |
| +	 */
 | |
| +	read(drv_data);
 | |
| +
 | |
| +	if (drv_data->rx == drv_data->rx_end) {
 | |
| +		/*
 | |
| +		 * Finished now - fall through and schedule next
 | |
| +		 * transfer tasklet
 | |
| +		 */
 | |
| +		if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM)
 | |
| +			set_16bit_transfer_mode(drv_data);
 | |
| +
 | |
| +		msg->state = next_transfer(drv_data);
 | |
| +	} else {
 | |
| +		/* not finished yet - keep going */
 | |
| +		msg->actual_length += write(drv_data);
 | |
| +		return IRQ_HANDLED;
 | |
| +	}
 | |
| +
 | |
| +	tasklet_schedule(&drv_data->pump_transfers);
 | |
| +
 | |
| +	return IRQ_HANDLED;
 | |
| +}
 | |
| +
 | |
| +/* caller already set message->status; dma and pio irqs are blocked */
 | |
| +static void giveback(struct driver_data *drv_data)
 | |
| +{
 | |
| +	struct spi_transfer *last_transfer;
 | |
| +	unsigned long flags;
 | |
| +	struct spi_message *msg;
 | |
| +	DBG("\n");
 | |
| +
 | |
| +	spin_lock_irqsave(&drv_data->lock, flags);
 | |
| +	msg = drv_data->cur_msg;
 | |
| +	drv_data->cur_msg = NULL;
 | |
| +	drv_data->cur_transfer = NULL;
 | |
| +	drv_data->cur_chip = NULL;
 | |
| +	queue_work(drv_data->workqueue, &drv_data->pump_messages);
 | |
| +	spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +
 | |
| +	last_transfer = list_entry(msg->transfers.prev,
 | |
| +				   struct spi_transfer,	transfer_list);
 | |
| +
 | |
| +	if (!last_transfer->cs_change)
 | |
| +		drv_data->cs_control(drv_data->cs, QSPI_CS_DROP);
 | |
| +
 | |
| +	msg->state = NULL;
 | |
| +	if (msg->complete)
 | |
| +		msg->complete(msg->context);
 | |
| +}
 | |
| +
 | |
| +
 | |
| +static void pump_transfers(unsigned long data)
 | |
| +{
 | |
| +	struct driver_data *drv_data = (struct driver_data *)data;
 | |
| +	struct spi_message *message = NULL;
 | |
| +	struct spi_transfer *transfer = NULL;
 | |
| +	struct spi_transfer *previous = NULL;
 | |
| +	struct chip_data *chip = NULL;
 | |
| +	unsigned long flags;
 | |
| +	DBG("\n");
 | |
| +	/* Get current state information */
 | |
| +	message = drv_data->cur_msg;
 | |
| +	transfer = drv_data->cur_transfer;
 | |
| +	chip = drv_data->cur_chip;
 | |
| +
 | |
| +	/* Handle for abort */
 | |
| +	if (message->state == ERROR_STATE) {
 | |
| +		message->status = -EIO;
 | |
| +		giveback(drv_data);
 | |
| +		return;
 | |
| +	}
 | |
| +
 | |
| +	/* Handle end of message */
 | |
| +	if (message->state == DONE_STATE) {
 | |
| +		message->status = 0;
 | |
| +		giveback(drv_data);
 | |
| +		return;
 | |
| +	}
 | |
| +
 | |
| +	if (message->state == START_STATE) {
 | |
| +		dspi_setup_chip(drv_data);
 | |
| +
 | |
| +		if (drv_data->cs_control)
 | |
| +			drv_data->cs_control(message->spi->chip_select,
 | |
| +				QSPI_CS_ASSERT);
 | |
| +	}
 | |
| +
 | |
| +	/* Delay if requested at end of transfer*/
 | |
| +	if (message->state == RUNNING_STATE) {
 | |
| +		previous = list_entry(transfer->transfer_list.prev,
 | |
| +					struct spi_transfer,
 | |
| +					transfer_list);
 | |
| +
 | |
| +		if (drv_data->cs_control && transfer->cs_change)
 | |
| +			drv_data->cs_control(message->spi->chip_select,
 | |
| +				QSPI_CS_DROP);
 | |
| +
 | |
| +		if (previous->delay_usecs)
 | |
| +			udelay(previous->delay_usecs);
 | |
| +
 | |
| +		if (drv_data->cs_control && transfer->cs_change)
 | |
| +			drv_data->cs_control(message->spi->chip_select,
 | |
| +				QSPI_CS_ASSERT);
 | |
| +	}
 | |
| +
 | |
| +	drv_data->flags = 0;
 | |
| +	drv_data->tx = (void *)transfer->tx_buf;
 | |
| +	drv_data->tx_end = drv_data->tx + transfer->len;
 | |
| +	drv_data->rx = transfer->rx_buf;
 | |
| +	drv_data->rx_end = drv_data->rx + transfer->len;
 | |
| +
 | |
| +	if (!drv_data->rx)
 | |
| +		drv_data->flags |= TRAN_STATE_RX_VOID;
 | |
| +	if (!drv_data->tx)
 | |
| +		drv_data->flags |= TRAN_STATE_TX_VOID;
 | |
| +	drv_data->cs = message->spi->chip_select;
 | |
| +	drv_data->cs_change = transfer->cs_change;
 | |
| +	drv_data->void_write_data = chip->void_write_data;
 | |
| +	if (transfer->speed_hz) {
 | |
| +		*(drv_data->ctar + drv_data->cs) = \
 | |
| +			((chip->ctar_val & ~0xF) | \
 | |
| +			  hz_to_spi_baud(chip->ctar.pbr, \
 | |
| +					 chip->ctar.dbr, \
 | |
| +					 transfer->speed_hz));
 | |
| +	}
 | |
| +
 | |
| +	message->state = RUNNING_STATE;
 | |
| +	/* Go baby, go */
 | |
| +	local_irq_save(flags);
 | |
| +	message->actual_length += write(drv_data);
 | |
| +	local_irq_restore(flags);
 | |
| +}
 | |
| +
 | |
| +
 | |
| +static void pump_messages(struct work_struct *work)
 | |
| +{
 | |
| +	struct driver_data *drv_data;
 | |
| +	unsigned long flags;
 | |
| +	DBG("\n");
 | |
| +
 | |
| +	drv_data = container_of(work, struct driver_data, pump_messages);
 | |
| +
 | |
| +	/* Lock queue and check for queue work */
 | |
| +	spin_lock_irqsave(&drv_data->lock, flags);
 | |
| +	if (list_empty(&drv_data->queue)
 | |
| +		|| drv_data->run == QUEUE_STOPPED) {
 | |
| +		drv_data->busy = 0;
 | |
| +		spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +		return;
 | |
| +	}
 | |
| +
 | |
| +	/* Make sure we are not already running a message */
 | |
| +	if (drv_data->cur_msg) {
 | |
| +		spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +		return;
 | |
| +	}
 | |
| +
 | |
| +	/* Extract head of queue */
 | |
| +	drv_data->cur_msg = list_entry(drv_data->queue.next,
 | |
| +					struct spi_message, queue);
 | |
| +	list_del_init(&drv_data->cur_msg->queue);
 | |
| +
 | |
| +	/* Initial message state*/
 | |
| +	drv_data->cur_msg->state = START_STATE;
 | |
| +	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
 | |
| +						struct spi_transfer,
 | |
| +						transfer_list);
 | |
| +
 | |
| +	if (drv_data->cur_transfer->transfer_list.next
 | |
| +		== &drv_data->cur_msg->transfers)
 | |
| +		drv_data->cur_transfer->cs_change = 1; /* last */
 | |
| +
 | |
| +
 | |
| +	/* Setup the SPI Registers using the per chip configuration */
 | |
| +	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
 | |
| +
 | |
| +	/* Mark as busy and launch transfers */
 | |
| +	tasklet_schedule(&drv_data->pump_transfers);
 | |
| +
 | |
| +	drv_data->busy = 1;
 | |
| +	spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +}
 | |
| +
 | |
| +/****************************************************************************/
 | |
| +
 | |
| +/*
 | |
| + * SPI master implementation
 | |
| + */
 | |
| +
 | |
| +static int transfer(struct spi_device *spi, struct spi_message *msg)
 | |
| +{
 | |
| +	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
 | |
| +	unsigned long flags;
 | |
| +
 | |
| +	DBG("\n");
 | |
| +	spin_lock_irqsave(&drv_data->lock, flags);
 | |
| +
 | |
| +	if (drv_data->run == QUEUE_STOPPED) {
 | |
| +		spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +		return -ESHUTDOWN;
 | |
| +	}
 | |
| +
 | |
| +	msg->actual_length = 0;
 | |
| +	msg->status = -EINPROGRESS;
 | |
| +	msg->state = START_STATE;
 | |
| +
 | |
| +	list_add_tail(&msg->queue, &drv_data->queue);
 | |
| +
 | |
| +	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
 | |
| +		queue_work(drv_data->workqueue, &drv_data->pump_messages);
 | |
| +
 | |
| +	spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +
 | |
| +static int setup(struct spi_device *spi)
 | |
| +{
 | |
| +
 | |
| +	struct chip_data *chip;
 | |
| +	struct coldfire_dspi_chip *chip_info
 | |
| +		= (struct coldfire_dspi_chip *)spi->controller_data;
 | |
| +	DBG("\n");
 | |
| +
 | |
| +	/* Only alloc on first setup */
 | |
| +	chip = spi_get_ctldata(spi);
 | |
| +	if (chip == NULL) {
 | |
| +		chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
 | |
| +		if (!chip)
 | |
| +			return -ENOMEM;
 | |
| +		spi->mode = chip_info->mode;
 | |
| +		spi->bits_per_word = chip_info->bits_per_word;
 | |
| +	}
 | |
| +
 | |
| +	chip->mcr.master = 1;
 | |
| +	chip->mcr.cont_scke = 0;
 | |
| +	chip->mcr.dconf = 0;
 | |
| +	chip->mcr.frz = 0;
 | |
| +	chip->mcr.mtfe = 0;
 | |
| +	chip->mcr.pcsse = 0;
 | |
| +	chip->mcr.rooe = 0;
 | |
| +	chip->mcr.pcsis = 0xFF;
 | |
| +	chip->mcr.reserved15 = 0;
 | |
| +	chip->mcr.mdis = 0;
 | |
| +	chip->mcr.dis_tx = 0;
 | |
| +	chip->mcr.dis_rxf = 0;
 | |
| +	chip->mcr.clr_tx = 1;
 | |
| +	chip->mcr.clr_rxf = 1;
 | |
| +	chip->mcr.smpl_pt = 0;
 | |
| +	chip->mcr.reserved71 = 0;
 | |
| +	chip->mcr.halt = 0;
 | |
| +
 | |
| +	if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
 | |
| +		chip->ctar.fmsz = spi->bits_per_word-1;
 | |
| +	} else {
 | |
| +		printk(KERN_ERR "Invalid wordsize\n");
 | |
| +		kfree(chip);
 | |
| +		return -ENODEV;
 | |
| +	}
 | |
| +
 | |
| +	chip->void_write_data = chip_info->void_write_data;
 | |
| +
 | |
| +	if (spi->max_speed_hz != 0)
 | |
| +		chip_info->br = hz_to_spi_baud(chip_info->pbr, chip_info->dbr, \
 | |
| +					       spi->max_speed_hz);
 | |
| +
 | |
| +	chip->ctar.cpha = (spi->mode & SPI_CPHA) ? 1 : 0;
 | |
| +	chip->ctar.cpol = (spi->mode & SPI_CPOL) ? 1 : 0;
 | |
| +	chip->ctar.lsbfe = (spi->mode & SPI_LSB_FIRST) ? 1 : 0;
 | |
| +	chip->ctar.dbr = chip_info->dbr;
 | |
| +	chip->ctar.pbr = chip_info->pbr;
 | |
| +	chip->ctar.br = chip_info->br;
 | |
| +	chip->ctar.pcssck = chip_info->pcssck;
 | |
| +	chip->ctar.pasc = chip_info->pasc;
 | |
| +	chip->ctar.pdt = chip_info->pdt;
 | |
| +	chip->ctar.cssck = chip_info->cssck;
 | |
| +	chip->ctar.asc = chip_info->asc;
 | |
| +	chip->ctar.dt = chip_info->dt;
 | |
| +
 | |
| +	spi_set_ctldata(spi, chip);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static int init_queue(struct driver_data *drv_data)
 | |
| +{
 | |
| +	INIT_LIST_HEAD(&drv_data->queue);
 | |
| +	spin_lock_init(&drv_data->lock);
 | |
| +
 | |
| +	drv_data->run = QUEUE_STOPPED;
 | |
| +	drv_data->busy = 0;
 | |
| +
 | |
| +	tasklet_init(&drv_data->pump_transfers,
 | |
| +			pump_transfers,	(unsigned long)drv_data);
 | |
| +
 | |
| +	INIT_WORK(&drv_data->pump_messages, pump_messages);
 | |
| +
 | |
| +	drv_data->workqueue = create_singlethread_workqueue(
 | |
| +					drv_data->master->dev.parent->bus_id);
 | |
| +	if (drv_data->workqueue == NULL)
 | |
| +		return -EBUSY;
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static int start_queue(struct driver_data *drv_data)
 | |
| +{
 | |
| +	unsigned long flags;
 | |
| +
 | |
| +	spin_lock_irqsave(&drv_data->lock, flags);
 | |
| +
 | |
| +	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
 | |
| +		spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +		return -EBUSY;
 | |
| +	}
 | |
| +
 | |
| +	drv_data->run = QUEUE_RUNNING;
 | |
| +	drv_data->cur_msg = NULL;
 | |
| +	drv_data->cur_transfer = NULL;
 | |
| +	drv_data->cur_chip = NULL;
 | |
| +	spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +
 | |
| +	queue_work(drv_data->workqueue, &drv_data->pump_messages);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static int stop_queue(struct driver_data *drv_data)
 | |
| +{
 | |
| +	unsigned long flags;
 | |
| +	unsigned limit = 500;
 | |
| +	int status = 0;
 | |
| +
 | |
| +	spin_lock_irqsave(&drv_data->lock, flags);
 | |
| +
 | |
| +	/* This is a bit lame, but is optimized for the common execution path.
 | |
| +	 * A wait_queue on the drv_data->busy could be used, but then the common
 | |
| +	 * execution path (pump_messages) would be required to call wake_up or
 | |
| +	 * friends on every SPI message. Do this instead */
 | |
| +	drv_data->run = QUEUE_STOPPED;
 | |
| +	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
 | |
| +		spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +		msleep(10);
 | |
| +		spin_lock_irqsave(&drv_data->lock, flags);
 | |
| +	}
 | |
| +
 | |
| +	if (!list_empty(&drv_data->queue) || drv_data->busy)
 | |
| +		status = -EBUSY;
 | |
| +
 | |
| +	spin_unlock_irqrestore(&drv_data->lock, flags);
 | |
| +
 | |
| +	return status;
 | |
| +}
 | |
| +
 | |
| +static int destroy_queue(struct driver_data *drv_data)
 | |
| +{
 | |
| +	int status;
 | |
| +
 | |
| +	status = stop_queue(drv_data);
 | |
| +	if (status != 0)
 | |
| +		return status;
 | |
| +
 | |
| +	destroy_workqueue(drv_data->workqueue);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +
 | |
| +static void cleanup(struct spi_device *spi)
 | |
| +{
 | |
| +	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
 | |
| +
 | |
| +	dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
 | |
| +		spi->master->bus_num, spi->chip_select);
 | |
| +
 | |
| +	kfree(chip);
 | |
| +}
 | |
| +
 | |
| +
 | |
| +/****************************************************************************/
 | |
| +
 | |
| +/*
 | |
| + * Generic Device driver routines and interface implementation
 | |
| + */
 | |
| +
 | |
| +static int coldfire_spi_probe(struct platform_device *pdev)
 | |
| +{
 | |
| +	struct device *dev = &pdev->dev;
 | |
| +	struct coldfire_spi_master *platform_info;
 | |
| +	struct spi_master *master;
 | |
| +	struct driver_data *drv_data = 0;
 | |
| +	struct resource *memory_resource;
 | |
| +	int irq;
 | |
| +	int status = 0;
 | |
| +	int i;
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +	dma_addr_t dma_handle;
 | |
| +#endif
 | |
| +
 | |
| +	platform_info = (struct coldfire_spi_master *)dev->platform_data;
 | |
| +
 | |
| +	master = spi_alloc_master(dev, sizeof(struct driver_data));
 | |
| +	if (!master)
 | |
| +		return -ENOMEM;
 | |
| +
 | |
| + 	drv_data = spi_master_get_devdata(master);
 | |
| + 	drv_data->master = master;
 | |
| +
 | |
| +	INIT_LIST_HEAD(&drv_data->queue);
 | |
| +	spin_lock_init(&drv_data->lock);
 | |
| +
 | |
| +	master->bus_num = platform_info->bus_num;
 | |
| +	master->num_chipselect = platform_info->num_chipselect;
 | |
| +	master->cleanup = cleanup;
 | |
| +	master->setup = setup;
 | |
| +	master->transfer = transfer;
 | |
| +
 | |
| +	drv_data->cs_control = platform_info->cs_control;
 | |
| +	if (drv_data->cs_control)
 | |
| +		for (i = 0; i < master->num_chipselect; i++)
 | |
| +			drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP);
 | |
| +
 | |
| +	/* Setup register addresses */
 | |
| +	memory_resource = platform_get_resource_byname(pdev,
 | |
| +				IORESOURCE_MEM, "spi-module");
 | |
| +	if (!memory_resource) {
 | |
| +		dev_dbg(dev, "can not find platform module memory\n");
 | |
| +		goto out_error_master_alloc;
 | |
| +	}
 | |
| +
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +	drv_data->edma_tx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
 | |
| +						   &dma_handle, GFP_DMA);
 | |
| +	if (!drv_data->edma_tx_buf) {
 | |
| +		dev_dbg(dev, "cannot allocate eDMA TX memory\n");
 | |
| +		goto out_error_master_alloc;
 | |
| +	}
 | |
| +	drv_data->edma_rx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
 | |
| +						   &dma_handle, GFP_DMA);
 | |
| +	if (!drv_data->edma_rx_buf) {
 | |
| +		dma_free_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
 | |
| +				  drv_data->edma_tx_buf, dma_handle);
 | |
| +		kfree(drv_data->edma_tx_buf);
 | |
| +		dev_dbg(dev, "cannot allocate eDMA RX memory\n");
 | |
| +		goto out_error_master_alloc;
 | |
| +	}
 | |
| +#endif
 | |
| +
 | |
| +	drv_data->mcr = (void *)&MCF_DSPI_DMCR;
 | |
| +	drv_data->ctar = (void *)&MCF_DSPI_DCTAR0;
 | |
| +	drv_data->dspi_sr = (void *)&MCF_DSPI_DSR;
 | |
| +	drv_data->dspi_rser = (void *)&MCF_DSPI_DRSER;
 | |
| +	drv_data->dspi_dtfr = (void *)&MCF_DSPI_DTFR;
 | |
| +	drv_data->dspi_drfr = (void *)&MCF_DSPI_DRFR;
 | |
| +
 | |
| +	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 | |
| +						       "spi-par");
 | |
| +	if (!memory_resource) {
 | |
| +		dev_dbg(dev, "No spi-par memory\n");
 | |
| +		goto out_error_master_alloc;
 | |
| +	}
 | |
| +	drv_data->par = (void *)memory_resource->start;
 | |
| +
 | |
| +	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 | |
| +						       "spi-int-level");
 | |
| +	if (!memory_resource) {
 | |
| +		dev_dbg(dev, "No spi-int-level memory\n");
 | |
| +		goto out_error_master_alloc;
 | |
| +	}
 | |
| +	drv_data->int_icr = (void *)memory_resource->start;
 | |
| +
 | |
| +	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 | |
| +						       "spi-int-mask");
 | |
| +	if (!memory_resource) {
 | |
| +		dev_dbg(dev, "No spi-int-mask memory\n");
 | |
| +		goto out_error_master_alloc;
 | |
| +	}
 | |
| +	drv_data->int_mr = (void *)memory_resource->start;
 | |
| +
 | |
| +	if (platform_info->irq_list) {
 | |
| +		/* multiple IRQs */
 | |
| +		int *irqlist = platform_info->irq_list;
 | |
| +		while ((irq = *irqlist++)) {
 | |
| +			int off = *irqlist++;
 | |
| +			int lvl = *irqlist++;
 | |
| +			int msk = *irqlist++;
 | |
| +			status = request_irq(irq, dspi_interrupt, IRQF_DISABLED,
 | |
| +					     dev->bus_id, drv_data);
 | |
| +			if (status < 0) {
 | |
| +				dev_err(&pdev->dev, 
 | |
| +					"Unable to attach ColdFire DSPI interrupt\n");
 | |
| +				goto out_error_master_alloc;
 | |
| +			}
 | |
| +
 | |
| +			if (lvl)
 | |
| +				*(drv_data->int_icr + off) = lvl;
 | |
| +
 | |
| +			if (msk)
 | |
| +				*drv_data->int_mr &= ~msk;
 | |
| +		}
 | |
| +	}
 | |
| +	else {
 | |
| +		irq = platform_info->irq_vector;
 | |
| +
 | |
| +		status = request_irq(platform_info->irq_vector, dspi_interrupt,
 | |
| +				     IRQF_DISABLED, dev->bus_id, drv_data);
 | |
| +		if (status < 0) {
 | |
| +			dev_err(&pdev->dev, "Unable to attach ColdFire DSPI interrupt\n");
 | |
| +			goto out_error_master_alloc;
 | |
| +		}
 | |
| +
 | |
| +		*drv_data->int_icr = platform_info->irq_lp;
 | |
| +		*drv_data->int_mr &= ~platform_info->irq_mask;
 | |
| +	}
 | |
| +
 | |
| +	/* Now that we have all the addresses etc.  Let's set it up */
 | |
| +	if (platform_info->par_val)
 | |
| +		*drv_data->par = platform_info->par_val;
 | |
| +
 | |
| +	/* Initial and start queue */
 | |
| +	status = init_queue(drv_data);
 | |
| +	if (status != 0) {
 | |
| +		dev_err(&pdev->dev, "Problem initializing DSPI queue\n");
 | |
| +		goto out_error_irq_alloc;
 | |
| +	}
 | |
| +	status = start_queue(drv_data);
 | |
| +	if (status != 0) {
 | |
| +		dev_err(&pdev->dev, "Problem starting DSPI queue\n");
 | |
| +		goto out_error_irq_alloc;
 | |
| +	}
 | |
| +
 | |
| +	/* Register with the SPI framework */
 | |
| +	platform_set_drvdata(pdev, drv_data);
 | |
| +	status = spi_register_master(master);
 | |
| +	if (status != 0) {
 | |
| +		dev_err(&pdev->dev, "Problem registering DSPI master\n");
 | |
| +		status = -EINVAL;
 | |
| +		goto out_error_queue_alloc;
 | |
| +	}
 | |
| +
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +	if (mcf_edma_request_channel(DSPI_DMA_TX_TCD,
 | |
| +				     edma_tx_handler,
 | |
| +				     NULL,
 | |
| +				     0x0,
 | |
| +				     pdev,
 | |
| +				     NULL, /* spinlock */
 | |
| +				     DRIVER_NAME) < 0){
 | |
| +		dev_err(&pdev->dev, "eDMA transmit channel request\n");
 | |
| +		status = -EINVAL;
 | |
| +		goto out_error_queue_alloc;
 | |
| +	}
 | |
| +
 | |
| +	if (mcf_edma_request_channel(DSPI_DMA_RX_TCD,
 | |
| +				     edma_rx_handler,
 | |
| +				     NULL,
 | |
| +				     0x0,
 | |
| +				     pdev,
 | |
| +				     NULL, /* spinlock */
 | |
| +				     DRIVER_NAME) < 0){
 | |
| +		dev_err(&pdev->dev, "eDAM receive channel request\n");
 | |
| +		status = -EINVAL;
 | |
| +		mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
 | |
| +		goto out_error_queue_alloc;
 | |
| +	}
 | |
| +#endif
 | |
| +
 | |
| +	printk(KERN_INFO "DSPI: Coldfire master initialized\n");
 | |
| +	return status;
 | |
| +
 | |
| +out_error_queue_alloc:
 | |
| +	destroy_queue(drv_data);
 | |
| +
 | |
| +out_error_irq_alloc:
 | |
| +	free_irq(platform_info->irq_vector, drv_data);
 | |
| +
 | |
| +out_error_master_alloc:
 | |
| +	spi_master_put(master);
 | |
| +	return status;
 | |
| +
 | |
| +}
 | |
| +
 | |
| +static int coldfire_spi_remove(struct platform_device *pdev)
 | |
| +{
 | |
| +	struct driver_data *drv_data = platform_get_drvdata(pdev);
 | |
| +	int irq;
 | |
| +	int status = 0;
 | |
| +
 | |
| +	if (!drv_data)
 | |
| +		return 0;
 | |
| +
 | |
| +#if defined(SPI_DSPI_EDMA)
 | |
| +	mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
 | |
| +	mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev);
 | |
| +#endif
 | |
| +
 | |
| +	/* Remove the queue */
 | |
| +	status = destroy_queue(drv_data);
 | |
| +	if (status != 0)
 | |
| +		return status;
 | |
| +
 | |
| +	/* Release IRQ */
 | |
| +	irq = platform_get_irq(pdev, 0);
 | |
| +	if (irq >= 0)
 | |
| +		free_irq(irq, drv_data);
 | |
| +
 | |
| +	/* Disconnect from the SPI framework */
 | |
| +	spi_unregister_master(drv_data->master);
 | |
| +
 | |
| +	/* Prevent double remove */
 | |
| +	platform_set_drvdata(pdev, NULL);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static void coldfire_spi_shutdown(struct platform_device *pdev)
 | |
| +{
 | |
| +	int status = coldfire_spi_remove(pdev);
 | |
| +
 | |
| +	if (status != 0)
 | |
| +		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
 | |
| +}
 | |
| +
 | |
| +
 | |
| +#ifdef CONFIG_PM
 | |
| +static int suspend_devices(struct device *dev, void *pm_message)
 | |
| +{
 | |
| +	pm_message_t *state = pm_message;
 | |
| +
 | |
| +	if (dev->power.power_state.event != state->event) {
 | |
| +		dev_warn(dev, "pm state does not match request\n");
 | |
| +		return -1;
 | |
| +	}
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static int coldfire_spi_suspend(struct platform_device *pdev,
 | |
| +				pm_message_t state)
 | |
| +{
 | |
| +	struct driver_data *drv_data = platform_get_drvdata(pdev);
 | |
| +	int status = 0;
 | |
| +
 | |
| +	/* Check all childern for current power state */
 | |
| +	if (device_for_each_child(&pdev->dev,
 | |
| +		&state, suspend_devices) != 0) {
 | |
| +		dev_warn(&pdev->dev, "suspend aborted\n");
 | |
| +		return -1;
 | |
| +	}
 | |
| +
 | |
| +	status = stop_queue(drv_data);
 | |
| +	if (status != 0)
 | |
| +		return status;
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static int coldfire_spi_resume(struct platform_device *pdev)
 | |
| +{
 | |
| +	struct driver_data *drv_data = platform_get_drvdata(pdev);
 | |
| +	int status = 0;
 | |
| +
 | |
| +	/* Start the queue running */
 | |
| +	status = start_queue(drv_data);
 | |
| +	if (status != 0) {
 | |
| +		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
 | |
| +		return status;
 | |
| +	}
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +#else
 | |
| +#define coldfire_spi_suspend NULL
 | |
| +#define coldfire_spi_resume NULL
 | |
| +#endif /* CONFIG_PM */
 | |
| +
 | |
| +static struct platform_driver driver = {
 | |
| +	.driver = {
 | |
| +		.name = "spi_coldfire",
 | |
| +		.bus = &platform_bus_type,
 | |
| +		.owner = THIS_MODULE,
 | |
| +	},
 | |
| +	.probe = coldfire_spi_probe,
 | |
| +	.remove = __devexit_p(coldfire_spi_remove),
 | |
| +	.shutdown = coldfire_spi_shutdown,
 | |
| +	.suspend = coldfire_spi_suspend,
 | |
| +	.resume = coldfire_spi_resume,
 | |
| +};
 | |
| +
 | |
| +static int __init coldfire_spi_init(void)
 | |
| +{
 | |
| +	platform_driver_register(&driver);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +module_init(coldfire_spi_init);
 | |
| +
 | |
| +static void __exit coldfire_spi_exit(void)
 | |
| +{
 | |
| +	platform_driver_unregister(&driver);
 | |
| +}
 | |
| +module_exit(coldfire_spi_exit);
 | |
| +
 | |
| +MODULE_AUTHOR("Matt Waddel");
 | |
| +MODULE_DESCRIPTION("ColdFire DSPI Contoller");
 | |
| +MODULE_LICENSE("GPL");
 | |
| --- /dev/null
 | |
| +++ b/include/asm-m68k/mcfdspi.h
 | |
| @@ -0,0 +1,48 @@
 | |
| +/*
 | |
| + * mcfdspi.h-DSPI controller for the ColdFire processors.
 | |
| + *
 | |
| + * Andrey Butok
 | |
| + * Copyright Freescale Semiconductor, Inc. 2008
 | |
| + *
 | |
| + *    This file is based on mcfqspi.h
 | |
| + *
 | |
| + * This program is free software; you can redistribute  it and/or modify it
 | |
| + * under  the terms of  the GNU General  Public License as published by the
 | |
| + * Free Software Foundation;  either version 2 of the  License, or (at your
 | |
| + * option) any later version.
 | |
| + *
 | |
| + * This program is distributed in the hope that it will be useful,
 | |
| + * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
| + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
| + * GNU General Public License for more details.
 | |
| + *
 | |
| + * You should have received a copy of the GNU General Public License
 | |
| + * along with this program; if not, write to the Free Software
 | |
| + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 | |
| + *
 | |
| + ***************************************************************************
 | |
| + * Changes:
 | |
| + *   v0.001	25 March 2008		Andrey Butok
 | |
| + *   		Initial Release - developed on uClinux with 2.6.23 kernel.
 | |
| + *
 | |
| + */
 | |
| +
 | |
| +#ifndef MCFDSPI_H_
 | |
| +#define MCFDSPI_H_
 | |
| +
 | |
| +struct coldfire_dspi_chip {
 | |
| +	u8 mode;
 | |
| +	u8 bits_per_word;
 | |
| +	u16 void_write_data;
 | |
| +	/* Only used in master mode */
 | |
| +	u8 dbr;		/* Double baud rate */
 | |
| +	u8 pbr;		/* Baud rate prescaler */
 | |
| +	u8 br;		/* Baud rate scaler */
 | |
| +	u8 pcssck;	/* PCS to SCK delay prescaler */
 | |
| +	u8 pasc;	/* After SCK delay prescaler */
 | |
| +	u8 pdt;		/* Delay after transfer prescaler */
 | |
| +	u8 cssck;	/* PCS to SCK delay scaler */
 | |
| +	u8 asc;		/* After SCK delay scaler */
 | |
| +	u8 dt;		/* Delay after transfer scaler */
 | |
| +};
 | |
| +#endif /*MCFDSPI_H_*/
 |