Once kernel 6.6 support ends, its dependencies will become redundant.
Remove them and keep only those for kernel 6.12.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/20943
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
New Packages / build options:
* sound-midi2: enable MIDI 2.0 / UMP in ALSA MIDI
* sound-midi2-seq: enable MIDI 2.0 / UMP in ALSA sequencer
* sound-midi2-usb: enable USB MIDI 2.0 support
* sound-dynamic-minors: allow more than 8 MIDI devices
More info about ALSA MIDI 2.0:
https://docs.kernel.org/6.12/sound/designs/midi-2.0.html
More info about MIDI 2.0:
https://midi.org/midi-2-0
Signed-off-by: Florian Bomers <github@bome.com>
Link: https://github.com/openwrt/openwrt/pull/20727
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Fix package name and AUTOLOAD parameter to match the
actual kernel module name (leds-group-multicolor), enabling proper
auto-loading at boot.
Signed-off-by: Andrii Kuiukoff <andros.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20447
Signed-off-by: Robert Marko <robimarko@gmail.com>
Previously, devices would have to select `CONFIG_RTL8261N_PHY=Y` in the
whole target's kernel config. Now that this driver is becoming usable
for devices other than Realtek switches, allow packaging this driver
separately.
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/20429
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently, the interfaces of the Mellanox Spectrum Switch QSFP ports
are all labeled eth*. Their order doesn't match the faceplate and is
different for each model.
They could be named during boot, but this isn't sufficient because they
support port splitting. After such ports are split, their port naming
begins again with eth*, and the same is true after they are unsplit again.
A hotplug script is used here that reads from the sysfs file
phys_port_name, which contains p1, p2, p3, ... for unsplit ports
and p1s0, p1s1, p1s2 for split ports.
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/17251
Signed-off-by: Robert Marko <robimarko@gmail.com>
Set the pre-init boot flag for the e1000e network device
driver so that it is loaded during the early pre-init
stage of the boot process instead of later.
Then, it is possible to rename its network ports via the
ucidef_set_network_device_path function from the
02_network script while booting.
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/17251
Signed-off-by: Robert Marko <robimarko@gmail.com>
The mlxreg-hotplug platform driver was failing to probe due to a missing
I²C multiplexer dependency. Previously, only kmod-i2c-mux-mlxcpld was
declared, but mlxreg also requires kmod-i2c-mux-reg to initialize its
I²C mux functionality.
Without this dependency, the driver probe was deferred:
[ 24.902331] platform mlxreg-hotplug: deferred probe pending: (reason unknown)
With kmod-i2c-mux-reg added, the probe succeeds and the expected
multiplexed I²C buses are registered:
[ 15.793884] i2c i2c-1: Added multiplexed i2c bus 2
[ 15.799391] i2c i2c-1: Added multiplexed i2c bus 3
[ 15.804830] i2c i2c-1: Added multiplexed i2c bus 4
...
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/20274
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix a typo on defining the PHY package kmod description that reference
phy-aeonsemi-as21x1x package instead of phy-aeonsemi-as21xxx.
Fixes: 08a616b216 ("generic: backport support for Aeonsemi AS21xxx PHY")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
gpio pwm driver is only available on kernel 6.11+.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20187
Signed-off-by: Robert Marko <robimarko@gmail.com>
Package the generic kernel PWM GPIO driver as module to avoid the need
to build it into the kernel.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://github.com/openwrt/openwrt/pull/20160
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit add kernel module support for Infineon DPS310/DPS368/DPS422
digital barometric air pressure and temperature sensor.
Test on custom board based on Mediatek MT7988a.
Signed-off-by: Elwin Huang <s09289728096@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20101
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The EN751221 has an XHCI that is compatible with MT7621.
While there is setup logic in the vendor code for both
EN751221 and MT7621, but MT7621 does not use it in mainline
or OpenWRT, and it appears to work correctly with EN751221.
Include SCSI / Mass Storage because many EcoNet devices
contain a builtin USB SD-Card reader.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://github.com/openwrt/openwrt/pull/20050
[Remove usb storage kmod from smartfiber_xp8421-b]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This adds kernel packages for the Vitesse VSC73XX switches.
I have split the switch into explicit SPI and platform integrated
variants as it's quite a bit of code.
Link: https://github.com/openwrt/openwrt/pull/20057
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Converts the KS8995 "phy" driver to a proper DSA switch.
Currently the upstream only supports the "none" tag
but this is a good improvement already.
Make the old module depend on kernel 6.6 and the new
one depend on !6.6.
The Realtek RTL8261n patch needs to be refreshed
because of textual dependencies.
Realtek RTL838x DSA and phy patches also have textual
dependencies and need to be refreshed.
The Mediatek in-flight DSA patch and related patches
also need to be rebased and refreshed.
Link: https://github.com/openwrt/openwrt/pull/19970
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Backport support for Aeonsemi AS121xxx PHY. The PHY require dedicated
firmware to be loaded to correctly work and support a big family of
Aeonsemi PHY that provide from 1G to 10G speed.
Automatically refresh all affected patch and file (rtl PHY).
Link: https://github.com/openwrt/openwrt/pull/19816
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
NILFS is a log-structured file system developed for Linux.
NILFS provides versioning capability of an entire file system
and continuous snapshotting that allows users to restore files
mistakenly overwritten or destroyed a while ago.
Signed-off-by: Pavlo Samko <bulldozerbsg@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18247
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add support for the Texas Instruments BQ32000 I2C real-time clock chip.
Tested on a custom board based on Hi-Link HLK-7628N.
Signed-off-by: Ondrej Kolar <ondrej@kolarovo.cz>
Link: https://github.com/openwrt/openwrt/pull/19764
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The cdns3 driver can be built without usb host mode support. Fix
dependencies to handle the case it is built with only gadget support.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/19246
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Build DWC3 driver in the right mode:
- host mode if kernel have usb host support only.
- gadget mode if kernel have usbgadget support only.
- dual-role mode if kernel have both usb host and usbgadget support.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/19246
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The usb role driver does not depend on the kernel config CONFIG_USB (host
side support). It only depends on the kernel config CONFIG_USB_SUPPORT.
Now it depends on the OpenWrt configurations USB_SUPPORT or
USB_GADGET_SUPPORT (usb and usbgadget features). We can assume that if usb
or usbgadget features are set, CONFIG_USB_SUPPORT has been set in the
target/subtarget kernel config.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/19246
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The usb gadget drivers don't depend on usb host support, so fix the package
dependencies accordingly.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/19246
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move usb-common driver from usb-core package to a new usb-common package.
The usb-common driver is needed by usb-gadget driver which can be used
without host support.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/19246
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch adds support for building the ds2438 one-wire kernel module.
Signed-off-by: Andres Heinloo <andres@gfz.de>
Link: https://github.com/openwrt/openwrt/pull/19694
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
kmod-sfc should add support for Solarflare SFC9000 series based cards.
However after kernel 5.19, support for the 'Siena' subclass of
SFN5000/6000 devices has been separated out since they went EOL as they
are no longer being actively developed. As kmod-sfc no longer provides
driver support for these cards and hasn't since kernel 5.2, a new kernel
module is needed to support these 10Gb Ethernet cards. More info here:
https://cateee.net/lkddb/web-lkddb/SFC_SIENA.html and here:
https://www.phoronix.com/news/Solarflare-SFC-Siena-Linux-5.19
The module can be compiled in separately and works if kernel is custom
compiled;
OpenWRT has made these changes already with the SFC 'falcon' subclass of
drivers already. See 3c5d70a and e5ba6e9
This is building on excellent work by @ynezz and @nasbdh9
Signed-off-by: Steve Wavler <trenchcoatjedi@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19647
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit adds kernel module support for Microchip MCP342x family of I2C ADCs.
Tested on a custom board based on Hi-Link HLK-7628N.
Signed-off-by: Ondrej Kolar <ondrej@kolarovo.cz>
Link: https://github.com/openwrt/openwrt/pull/19619
Signed-off-by: Robert Marko <robimarko@gmail.com>
Select the kmod-drm-display-helper package instead of depending on it.
kmod-drm-display-helper is hidden now, so the user can not manually
select it.
This fixes the build of the imx target.
Fixes: 8bcc6d1894 ("kernel: kmod-drm-display-helper: Mark hidden")
Link: https://github.com/openwrt/openwrt/pull/19532
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
kmod-crypto-lib-aescfb is marked hidden and not selected by any other
package, it can not be build.
The Kconfig option in the kernel has no title, so it can not be
selected, it is only selected by CONFIG_TCG_TPM2_HMAC in the kernel.
Fixes: ef2310b031 ("kernel: modules: update dependency for kmod-tpm")
Fixes: aa51a1c13a ("kernel: kmod-crypto-lib-aescfb: Mark hidden")
Link: https://github.com/openwrt/openwrt/pull/19532
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The nfs_layout_flexfiles.ko and nfs_layout_nfsv41_files.ko file are
build automatically when CONFIG_NFS_V4_1 is selected, we can not
deactivate them. Pack them into the NFS package too. I do not know if we
should also load them automatically.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The CONFIG_B53 kernel config option will select this driver. Add
the driver to the kernel config menu and make kmod-dsa-b53 depend on
it.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The CONFIG_BCMGENET kernel config option will select this driver. Add
the driver to the kernel config menu and make kmod-bcmgenet depend on
it.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_PARMAN has no title and can not be
directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_OBJAGG has no title and can not be
directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_DRM_DISPLAY_HELPER has no title and can
not be directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_DRM_BUDDY has no title and can not
be directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_V4L2_ASYNC has no title and can not
be directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_V4L2_FWNODE has no title and can not
be directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_CRYPTO_LIB_AESCFB has no title and can not
be directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_CRYPTO_ENGINE has no title and can not
be directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kernel config option CONFIG_IIO_BACKEND has no title and can not be
directly selected. Do the same for this kmod and make it hidden.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The kernel driver configuration depends on PINCTRL.
Show this driver only on targets supporting pinctrl.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These drivers depend on the kernel option CONFIG_PWM, only add them to
OpenWrt for targets which have PWM support.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The kernel driver configuration depends on ath79 or compile test and not
on PCI. Allow this package in OpenWrt only for the ath79 target.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
