3 Commits

Author	SHA1	Message	Date
Liangbin Lian	c795a91579	rockchip: Add support for RK3568 LinkEase EasePi R1 ... Specification: - Rockchip RK3568 - 2GB/4GB LPDDR4 RAM - 16GB on-board eMMC - 1x M.2 key for 2280 NVMe (PCIe 3.0) - 1x USB 3.0 Type-A - 1x USB 2.0 Type-C (for USB flashing) - 2x 1000 Base-T (native, RTL8211F) - 2x 2500 Base-T (PCIe, RTL8125B) - 1x HDMI 2.0 Output - 12v DC Jack - 1x Power key connected to PMIC - 2x LEDs (one static power supplied, one GPIO controlled) Debug Serial Port: 3.3V TTL, 3-pin 2.54mm pitch connector, 1500000 bauds, 'J7' on board with G/R/T (GND/RX/TX) pins marked Installation - eMMC: -Boot official firmware (OpenWRT based) -Upload sysupgrade.img.gz to /tmp/firmware.bin (with scp or web page) -Flash to eMMC: sysupgrade -n -p -F /tmp/firmware.bin Signed-off-by: Liangbin Lian <jjm2473@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20147 (cherry picked from commit 8ca4caacd0) [refresh patches upon 24.10 branch] Link: https://github.com/openwrt/openwrt/pull/20744 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>	2025-11-29 01:05:47 +01:00
John Audia	b506c964a2	kernel: bump 6.6 to 6.6.61 ... Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.61 Manually rebased: bcm27xx/patches-6.6/950-0998-i2c-designware-Add-support-for-bus-clear-feature.patch All other patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> Link: https://github.com/openwrt/openwrt/pull/16959 (cherry picked from commit 487ca61f91) Link: https://github.com/openwrt/openwrt/pull/17055 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>	2024-11-24 22:46:21 +01:00
Tianling Shen	76a75b43ba	rockchip: add ArmSoM Sige7 support ... This board is also as known as Bananapi BPi-M7. Hardware -------- RockChip RK3588 ARM64 (8 cores) 8/16/32GB LPDDR4/LPDDR4x RAM 2x 2500 Base-T (PCIe, rtl8125b) 2 LEDs (RED / GREEN) 16GB/32GB/64GB/128GB eMMC on-board Micro-SD Slot USB 2.0 Port USB 3.0 Port M.2 M-Key 40-Pin Header USB PD 2.0 9/12/15V Power Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Link: https://github.com/openwrt/openwrt/pull/16462 Signed-off-by: Nick Hainke <vincent@systemli.org>	2024-09-23 20:04:50 +02:00