Florian Fainelli
6f484fc283
provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
...
SVN-Revision: 14683
2009-02-27 15:48:23 +00:00
Florian Fainelli
b539d11497
move the device registration to an earlier initcall level, required for fallback SPROM to work
...
SVN-Revision: 14681
2009-02-27 15:18:34 +00:00
Felix Fietkau
11014b5cea
disable all kernel config options that are set to =m
...
SVN-Revision: 14611
2009-02-22 04:44:24 +00:00
Hauke Mehrtens
3f085cd501
update to 2.6.28.7 and 2.6.27.19
...
SVN-Revision: 14601
2009-02-21 18:53:05 +00:00
Gabor Juhos
47665da430
update to 2.6.27.17
...
SVN-Revision: 14513
2009-02-15 07:47:12 +00:00
Florian Fainelli
eda8310293
always select kmod-ssb, pci is supported
...
SVN-Revision: 14492
2009-02-13 00:13:39 +00:00
Florian Fainelli
99203ed0b1
do not overried 802.1q and PHY kernel configuration symbols
...
SVN-Revision: 14468
2009-02-10 17:53:52 +00:00
Gabor Juhos
7f04c52b92
update to 2.6.27.15
...
SVN-Revision: 14440
2009-02-08 12:32:39 +00:00
Florian Fainelli
1fc20f18d4
resync kernel configuration
...
SVN-Revision: 14395
2009-02-03 19:59:01 +00:00
Florian Fainelli
730346e2d5
add support for user9102 boards ( #4537 )
...
SVN-Revision: 14305
2009-01-31 16:01:20 +00:00
Florian Fainelli
c2c0d74f67
generate images for old CFE based boards like the Davolink DV201
...
SVN-Revision: 14264
2009-01-29 14:56:45 +00:00
Florian Fainelli
d7cb033a04
Add board definitions for the Davolink DV201AMR
...
SVN-Revision: 14263
2009-01-29 14:54:13 +00:00
Gabor Juhos
2a0825b4d3
update to 2.6.27.13
...
SVN-Revision: 14179
2009-01-25 18:33:19 +00:00
Gabor Juhos
0c2e187f54
switch to 2.6.27.12
...
SVN-Revision: 14157
2009-01-23 13:30:27 +00:00
Florian Fainelli
46b91ed787
frequency is in Hz, thanks Joel
...
SVN-Revision: 14067
2009-01-17 15:29:36 +00:00
Florian Fainelli
5ce93c07a5
fix SPI register definitions
...
SVN-Revision: 14048
2009-01-15 22:53:32 +00:00
Florian Fainelli
5905a48169
allow bcm6338 to get the base address of the memory controller register, required to detect memory size
...
SVN-Revision: 14047
2009-01-15 22:42:22 +00:00
Gabor Juhos
3ca7f3bd6f
update to 2.6.27.11
...
SVN-Revision: 14043
2009-01-15 13:40:35 +00:00
Florian Fainelli
4c7d2cf90e
correct SPI register size
...
SVN-Revision: 13886
2009-01-06 14:49:27 +00:00
Andy Boyett
9f8c82da09
Add hostapd-mini to default images where applicable
...
SVN-Revision: 13819
2009-01-02 05:12:46 +00:00
Gabor Juhos
8395d01b59
update to 2.6.27.10
...
SVN-Revision: 13695
2008-12-19 19:25:35 +00:00
Florian Fainelli
85d59fbf8c
add board registration of the bcm96338gw
...
SVN-Revision: 13693
2008-12-19 17:24:29 +00:00
Florian Fainelli
3f7137022d
6338 has no PCI
...
SVN-Revision: 13692
2008-12-19 17:08:11 +00:00
Florian Fainelli
3dd67d64f4
add experimental support for bcm6338
...
SVN-Revision: 13691
2008-12-19 17:05:09 +00:00
Florian Fainelli
fa5a568380
Register watchdog driver
...
SVN-Revision: 13690
2008-12-19 15:00:33 +00:00
Florian Fainelli
42ff43386a
fix register definitions for bcm6358, thanks SGDA
...
SVN-Revision: 13688
2008-12-19 10:19:00 +00:00
Florian Fainelli
3ae3bf981e
resync kernel configuration
...
SVN-Revision: 13687
2008-12-19 10:16:52 +00:00
Florian Fainelli
7ab973e1af
Add bcm63xx_wdt but do not enable it yet
...
SVN-Revision: 13677
2008-12-17 14:06:03 +00:00
Gabor Juhos
e7336673b1
update to 2.6.27.9 and refresh patches
...
SVN-Revision: 13659
2008-12-16 10:37:14 +00:00
Florian Fainelli
562ff99c2c
Build images for Inventel Livebox
...
SVN-Revision: 13616
2008-12-12 15:16:57 +00:00
Florian Fainelli
34867901d0
Resync kernel config
...
SVN-Revision: 13607
2008-12-11 23:16:54 +00:00
Florian Fainelli
4025c12a2d
Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348)
...
SVN-Revision: 13588
2008-12-10 23:57:23 +00:00
Florian Fainelli
4dc65aed63
Add support for Sagem F@ST2404 ( #4332 )
...
SVN-Revision: 13583
2008-12-10 16:13:41 +00:00
Florian Fainelli
5dc3098a6c
Disable CONFIG_NF_CT_ACCT
...
SVN-Revision: 13577
2008-12-10 01:39:29 +00:00
Florian Fainelli
6acf4c2a19
Fix remaining bug of the off-by-one error ;)
...
SVN-Revision: 13551
2008-12-08 21:00:00 +00:00
Florian Fainelli
fadddcc655
Enable ohci on bcm96348gw
...
SVN-Revision: 13549
2008-12-08 16:25:41 +00:00
Florian Fainelli
47050e72be
Prepare bcm63xx for SPI master support
...
SVN-Revision: 13547
2008-12-08 14:14:37 +00:00
Florian Fainelli
f3be50a031
Add support for bcm96348gw10 (Netgear DG834GT) ( #4319 )
...
SVN-Revision: 13540
2008-12-07 20:34:48 +00:00
Gabor Juhos
4992a87aeb
update to 2.6.27.8 and refresh patches
...
SVN-Revision: 13528
2008-12-06 09:59:55 +00:00
Gabor Juhos
919a8a9fe0
make mips_machine stuff available for other MIPS targets
...
SVN-Revision: 13492
2008-12-02 21:54:53 +00:00
Florian Fainelli
01a5c953a3
Fix an off-by one printing error
...
SVN-Revision: 13469
2008-12-02 14:11:54 +00:00
Florian Fainelli
043562037f
resync kernel config
...
SVN-Revision: 13433
2008-11-29 16:33:07 +00:00
Florian Fainelli
e8aad7938a
Improve Inventel Livebox support
...
SVN-Revision: 13427
2008-11-29 12:57:41 +00:00
Florian Fainelli
aa3c775b65
Reorder profiles numbering, broadcom being the most widely used
...
SVN-Revision: 13401
2008-11-28 16:35:10 +00:00
Florian Fainelli
cc2e43992d
bcm63xx MTD driver cleanup and fixes: - convert to platform_driver - get the window_size/addr from the board setup code - indentation fixes - remove duplicate code - move bcm_tag declaration out of the MTD driver
...
SVN-Revision: 13379
2008-11-27 20:40:03 +00:00
Florian Fainelli
bbad86e098
Add missing config symbol for SSB
...
SVN-Revision: 13378
2008-11-27 20:38:01 +00:00
Florian Fainelli
44108d6a2d
Commit changes on the files for gpiolib
...
SVN-Revision: 13374
2008-11-27 10:38:36 +00:00
Florian Fainelli
36fc2d1f93
Convert brcm63xx to gpiolib
...
SVN-Revision: 13373
2008-11-27 10:38:01 +00:00
Florian Fainelli
1c77ec0587
Flatten brcm63xx patches, should make our life easier to patch files now ;)
...
SVN-Revision: 13368
2008-11-26 18:41:01 +00:00
Florian Fainelli
4fc7535fc7
Make 4-port LAN and 1 port wan configurations work
...
SVN-Revision: 13362
2008-11-26 15:51:55 +00:00
Imre Kaloz
752054346a
update to 2.6.27.7
...
SVN-Revision: 13347
2008-11-25 13:54:46 +00:00
Imre Kaloz
a695fa76a4
move THERMAL symbols into the generic config
...
SVN-Revision: 13346
2008-11-25 13:52:25 +00:00
Florian Fainelli
0f26e35e37
brcm63xx has pcmcia support and is able to run b43 on its pci bus
...
SVN-Revision: 13303
2008-11-20 23:08:20 +00:00
Florian Fainelli
5acddecc68
Update brcm63xx broadcom profile now that b43 is available
...
SVN-Revision: 13302
2008-11-20 23:01:48 +00:00
Florian Fainelli
8f5351a4f2
Synchroniz bcm63xx kernel configuration
...
SVN-Revision: 13300
2008-11-20 22:16:48 +00:00
Florian Fainelli
e854a26332
Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail
...
SVN-Revision: 13299
2008-11-20 21:26:11 +00:00
Florian Fainelli
107aa04e06
Generate valid images for the bcm96348gw board
...
SVN-Revision: 13298
2008-11-20 21:22:45 +00:00
Imre Kaloz
722c78cd1e
move some options to the generic 2.6.27 config
...
SVN-Revision: 13264
2008-11-17 17:28:12 +00:00
Imre Kaloz
7d09c0b086
update to 2.6.27.6
...
SVN-Revision: 13261
2008-11-17 17:22:30 +00:00
Florian Fainelli
0d4286b0b3
This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. ( #4201 )
...
SVN-Revision: 13213
2008-11-15 11:30:22 +00:00
Florian Fainelli
cb126cd576
Package bcm63xx-pcmcia kernel module and fix compilation
...
SVN-Revision: 13212
2008-11-15 11:26:23 +00:00
Florian Fainelli
9bbc37d26b
Remove old kernel configuration files
...
SVN-Revision: 13211
2008-11-15 11:23:29 +00:00
Florian Fainelli
517e3d404c
Delete old brcm63xx files
...
SVN-Revision: 13210
2008-11-15 11:21:42 +00:00
Gabor Juhos
88cda758c3
update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches * based on a patch by Hauke Mehrtens * closes #4193
...
SVN-Revision: 13192
2008-11-12 17:49:01 +00:00
Nicolas Thill
0a11abc83d
add missing kconfig symbols for 2.6.27 targets when all modules are enabled
...
SVN-Revision: 13178
2008-11-11 02:43:35 +00:00
Felix Fietkau
d0388bbe5c
brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition
...
SVN-Revision: 13130
2008-11-06 12:52:39 +00:00
Florian Fainelli
7cedaafd0c
Add basic support for Inventel Liveboxes, resync kernel config
...
SVN-Revision: 13108
2008-11-03 20:30:43 +00:00
Florian Fainelli
9aa1d64b91
Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken
...
SVN-Revision: 13106
2008-11-03 18:52:58 +00:00
Florian Fainelli
aa90a702db
Use 2.6.27.4 kernel version
...
SVN-Revision: 13055
2008-10-28 11:19:24 +00:00
Florian Fainelli
30d2200e7d
Update targets to 2.6.27.3
...
SVN-Revision: 13035
2008-10-23 09:11:10 +00:00
Florian Fainelli
28baca91fe
Update patches and rename board 9 stands for development board
...
SVN-Revision: 13024
2008-10-22 09:20:51 +00:00
Florian Fainelli
691e187381
Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
...
SVN-Revision: 13015
2008-10-20 12:55:28 +00:00
Florian Fainelli
64c28032c8
New Broadcom BCM63xx codebase, huge thanks to Maxime ;)
...
SVN-Revision: 13001
2008-10-17 22:53:56 +00:00
Florian Fainelli
5718709711
Fix reference to the old and replaced kmod-rt61
...
SVN-Revision: 12723
2008-09-27 10:47:00 +00:00
Gabor Juhos
821170133f
update to 2.6.26.5 and 2.6.25.17
...
SVN-Revision: 12718
2008-09-26 18:46:53 +00:00
Nicolas Thill
3029c2fd53
disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported
...
SVN-Revision: 12690
2008-09-24 19:28:53 +00:00
Gabor Juhos
184c6b06f2
update to 2.6.26.3 and 2.6.25.16
...
SVN-Revision: 12371
2008-08-22 15:37:19 +00:00
Gabor Juhos
e5fa05d788
update to 2.6.25.15 and 2.6.26.2
...
SVN-Revision: 12242
2008-08-07 16:52:52 +00:00
Gabor Juhos
104b3386a2
update to 2.6.25.12
...
SVN-Revision: 11933
2008-07-26 10:53:23 +00:00
Imre Kaloz
492ba57b56
update targets to 2.6.25.10
...
SVN-Revision: 11667
2008-07-05 16:52:15 +00:00
Imre Kaloz
dee39d10ee
upgrade to 2.6.25.9
...
SVN-Revision: 11584
2008-06-26 14:28:16 +00:00
Gabor Juhos
4af6ac74fb
upgrade to 2.6.25.7, and refresh patches
...
SVN-Revision: 11523
2008-06-17 12:57:04 +00:00
Imre Kaloz
2eb6751084
upgrade to 2.6.25.6
...
SVN-Revision: 11435
2008-06-11 11:38:39 +00:00
Florian Fainelli
6e0427c8a4
Add bcm3350 cpuid
...
SVN-Revision: 11364
2008-06-05 16:19:46 +00:00
Gabor Juhos
c2619fb5ab
revert kernel version to 2.6.25.4
...
SVN-Revision: 11273
2008-05-27 06:27:16 +00:00
Gabor Juhos
ac897ce5b1
refresh kernel patches
...
SVN-Revision: 11201
2008-05-19 08:33:22 +00:00
Gabor Juhos
f9719b35c8
upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19)
...
SVN-Revision: 11184
2008-05-18 20:12:54 +00:00
Felix Fietkau
12da51bb3c
bcm96345: correct some 6345 specific stuff
...
This fixes some problems with the 6345 support and adds a macro for CPU
identification that is easier on the eyes. The first thing it does is to not
initialize MPI on the 6345 as it does not have PCI. The second thing it does is
to use a static value for the CPU frequency of the 6345 chip to provide an
accurate timer.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11183
2008-05-18 17:32:16 +00:00
Felix Fietkau
ab2b78aabd
bcm963xx: fix cfe detection
...
The CFE detection failed to account for zero termination.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11182
2008-05-18 17:32:05 +00:00
Felix Fietkau
be49888f6c
bcm963xx: add new timer code
...
This basically selects the new generic MIPS timer code for BCM963xx and
simplifies the timer setup code.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11181
2008-05-18 17:31:55 +00:00
Felix Fietkau
f92e4aaf53
bcm963xx: remove obsolete timer code
...
This removes some code that has been deprecated in kernels >= 2.6.24.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11180
2008-05-18 17:31:45 +00:00
Felix Fietkau
4db60563fc
bcm963xx: fix uart isr
...
The ISR ended up in an endless loop because the TX ISR never got used or masked.
This patch basically makes the TX ISR mask the the TX interrupt when it
encounters it, because it doesn't even use the TX interrupt.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11179
2008-05-18 17:31:35 +00:00
Felix Fietkau
ca851edf10
bcm963xx: rewrite irq handling code
...
This patch adds interrupt handling as on AR7. The old code was very messy and
didn't work too well. It also removes the unused file int-handler.S.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11178
2008-05-18 17:31:25 +00:00
Felix Fietkau
289c41604f
bcm963xx: add missing trailing zero to load address
...
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11177
2008-05-18 17:31:11 +00:00
Felix Fietkau
17d20bb016
bcm963xx: flashmap support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11176
2008-05-18 17:31:02 +00:00
Felix Fietkau
da18b98cff
bcm963xx: serial port support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11175
2008-05-18 17:30:49 +00:00
Felix Fietkau
97b85443eb
bcm963xx: board support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11174
2008-05-18 17:30:39 +00:00
Felix Fietkau
f94d5eafc9
bcm963xx: add 2.6.25 configuration file
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11173
2008-05-18 17:30:30 +00:00
Felix Fietkau
8e7ff7a673
bcm963xx: use the 2.6.25.1 kernel
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11172
2008-05-18 17:30:16 +00:00
Felix Fietkau
2dfabe3991
bcm963xx: image generation using image tagger
...
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
Felix Fietkau
46b4413fbb
bcm963xx: fix load address / kernel entry
...
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11169
2008-05-18 17:29:39 +00:00
Nicolas Thill
e3a42b23c6
enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
...
SVN-Revision: 11097
2008-05-09 17:08:51 +00:00
Imre Kaloz
68943e35c2
upgrade to 2.6.24.5
...
SVN-Revision: 10959
2008-04-28 10:23:36 +00:00
Nicolas Thill
c6fe45ed55
properly disable CONFIG_CRYPTO_HW
...
SVN-Revision: 10952
2008-04-27 12:31:50 +00:00
Florian Fainelli
03f917f26c
Delete config-default file and resync kernel configuration for brcm63xx
...
SVN-Revision: 10790
2008-04-11 14:22:41 +00:00
Florian Fainelli
62240465c4
brcm63xx image generation cleanups ( #3169 )
...
SVN-Revision: 10703
2008-04-01 21:10:47 +00:00
Florian Fainelli
ebf4eb11e9
Upgrade brcm63xx to 2.6.24
...
SVN-Revision: 10455
2008-02-13 17:31:17 +00:00
Gabor Juhos
0a72d14e40
resync kernel config
...
SVN-Revision: 10444
2008-02-11 15:28:45 +00:00
Imre Kaloz
3a0e58b2e1
upgrade & standardize kernel versions
...
SVN-Revision: 10443
2008-02-11 10:50:40 +00:00
Felix Fietkau
3f7af01bb0
fix initramfs
...
SVN-Revision: 10080
2008-01-01 21:38:06 +00:00
Felix Fietkau
1bca0cc517
make the image filenames a bit shorter
...
SVN-Revision: 9533
2007-11-10 23:08:11 +00:00
Nicolas Thill
5f0272d618
move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs.
...
SVN-Revision: 8980
2007-09-23 15:12:12 +00:00
Nicolas Thill
fec4d9ee3c
add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP ( closes : #2297 , thanks to aorlinsk), sync 2.4 / 2.6 kconfigs.
...
SVN-Revision: 8955
2007-09-22 18:37:24 +00:00
Felix Fietkau
236d7e62ca
clean up jffs2 config options
...
SVN-Revision: 8848
2007-09-19 20:58:16 +00:00
Felix Fietkau
87a88cebc7
adapt profiles for subtarget changes
...
SVN-Revision: 8695
2007-09-08 20:04:43 +00:00
Felix Fietkau
a9d683ca91
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
...
SVN-Revision: 8694
2007-09-08 19:55:42 +00:00
Felix Fietkau
56231056ea
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
SVN-Revision: 8653
2007-09-06 16:27:37 +00:00
