This release includes several fixes, most notable are
"-Wunterminated-string-initialization" fixes for upcoming GCC 15.x
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19011
Signed-off-by: Robert Marko <robimarko@gmail.com>
Import libxcrypt from the packages feed to the main OpenWrt repo,
as glibc 2.41 doesn't provide libcrypt (since 2.39 release).
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19011
Signed-off-by: Robert Marko <robimarko@gmail.com>
The plumbing is there in the ucode files to set the parameter using
nl80211. However, the option is never forwarded because it was missing
in mac80211.sh. Add it there and in the schema file.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://github.com/openwrt/openwrt/pull/19030
Signed-off-by: Robert Marko <robimarko@gmail.com>
61ae5732adea iprule: amend ipproto netlink nla_put_u32 to nla_put_u8
d610d68c71b8 device: add support for configuring vrf
a1b6386a20a6 device: fix bonding primary port selection
e8bbf246ce2e system-linux: fix sysfs name for all_ports_active flag
723c699e84f4 Restore disable_ipv6 sysctl after removing a device from bridge or bond
d476e18e8d43 iprule: resolve ipproto by name
7901e66c5f27 netifd: iprule add sport and dport
Signed-off-by: Robert Marko <robimarko@gmail.com>
Inverted condition caused wrong value for eht_oper_centr_freq_seg0_idx
get selected in ETH320 mode, causing AP fail to start.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18998
Signed-off-by: Robert Marko <robimarko@gmail.com>
Linux 6.8 changed the directory structure for the video-code driver.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/19029
Signed-off-by: Nick Hainke <vincent@systemli.org>
The original OF code effectively does a reset at ahb.c but then again in
hw.c. For AR9330, it's already done in the driver and with the others,
there are patches in here that do the same. hw.c looks like the proper
place to handle this.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19031
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fixes ath9k on ar934x platforms.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19031
Signed-off-by: Robert Marko <robimarko@gmail.com>
Building against recent kernel versions (noticed with 6.12) and -Werror
can fail because a macro MAX(a,b) is already defined in minmax.h or
kernel.h before 5.10.
In file included from ../mwlwifi-2025.02.06~db97edf2/hif/fwcmd.h:23,
from ../mwlwifi-2025.02.06~db97edf2/core.c:25:
../mwlwifi-2025.02.06~db97edf2/hif/hostcmd.h:1124:9: error: "MAX" redefined [-Werror]
1124 | #define MAX(a, b) (((a) > (b)) ? (a) : (b))
| ^~~
In file included from usr/include/mac80211-backport/linux/minmax.h:4,
from ./include/linux/kernel.h:28,
from usr/include/mac80211-backport/linux/kernel.h:3,
from ./include/linux/skbuff.h:13,
from usr/include/mac80211-backport/linux/skbuff.h:3,
from ./include/linux/if_ether.h:19,
from usr/include/mac80211-backport/linux/if_ether.h:3,
from ./include/linux/etherdevice.h:20,
from usr/include/mac80211-backport/linux/etherdevice.h:3,
from ../mwlwifi-2025.02.06~db97edf2/core.c:18:
./include/linux/minmax.h:330:9: note: this is the location of the previous definition
330 | #define MAX(a,b) __cmp(max,a,b)
| ^~~
Add a pending upstream patch which replaces the MAX(a,b) macro to avoid
conflicts and allow compilation with 6.12
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/18980
Signed-off-by: Robert Marko <robimarko@gmail.com>
Request Softwire46 (S46) [RFC 7598] options when the map and/or ds-lite
packages are installed. This is required as the behaviour of odhcp6c has
changed to not include these OROs by default.
See openwrt/odhcp6c#89
Signed-off-by: Richard Patterson <richard@helix.net.nz>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
446db12b1fd3 MP: fix uniphy reset in phy to phy link scenario
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
3423fdacac63 ssdk_clk: Remove MP_PHY clocks resets and init logic
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18774
Signed-off-by: Robert Marko <robimarko@gmail.com>
Every time "sysupgrade -b -" runs it would generate a new
(synthetic) "/etc/uci-defaults/10_disable_services" file with
the current time as the modified time. This unfortunately
creates a non-deterministic tarball, so if you run a cron job
to save your state, you don't have a trivial way of seeing if
it changed or not without unpacking the archive, deleting this
file, and comparing the entire directory tree to the previous
backup.
Fixes: #16145
Fixes: 0ad062a21b ("base-files: sysupgrade: include uci-defaults script disabling services #2")
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
When running ACS on multi-radio devices, ACS on one band can block another.
Increase the number of retries and prevent bouncing interfaces between AP
and STA mode during attempts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Generate network configuration replacing netmask with CIDR.
Depends on:
https://github.com/openwrt/openwrt/pull/13765
Using CIDR provides the following advantages:
* Consolidate notation for IPv4 and IPv6 addresses.
* Consolidate notation for IP addresses and routing targets.
* Simplify network configuration and troubleshooting.
* Follow the transition from net-tools to iproute2.
Resulting configuration example:
```
config interface 'loopback'
option device 'lo'
option proto 'static'
list ipaddr '127.0.0.1/8'
config interface 'lan'
option device 'br-lan'
option proto 'static'
list ipaddr '192.168.1.1/24'
```
Signed-off-by: Vladislav Grigoryev <vg.aetera@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/13780
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some modems and SIM cards take a bit longer to initialize after UIM has been
powered off. Waiting too little time can cause the qmi protocol to end up
in a loop repeatedly power-cycling the SIM card.
Avoid that by
a) increasing the time we unconditionally sleep after --uim-power-on
b) increasing the time we allow uqmi to wait for response for --uim-get-sim-state
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18772
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The call to 'ipcalc' is used in 'dnsmasq' init script to create the
configuration. If the 'ipaddr' is in the configured range then 'ipcalc' exited
with an error whereby the START/STOP variables are unavailable.
This behaviour has changed during 'ipcalc' refactoring and now leads to a
problem when starting 'dnsmasq' if the 'ipaddr' is inside this range. To
restore the old behaviour, only a warning is issued as before and the
required variables for the 'dnsmasq' are still set.
Fixes: 854739b32c (base-files: ipcalc.sh: Rewrite in pure shell)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/18641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the uci 'dhcp' configuration for the dhcp leases is incorrect then
the call to 'ipclac' fails. However, the problem is that the dnsmasq
configuration option 'dhcp-range' is still written for this uci section
even though the information generated by ipcalc is incorrect or not set.
Due to the incorrectly generated configuration for dnsmasq, the service
cannot start.
To prevent an incorrect configuration from being written to the configuration,
a check is now made beforehand to ensure that the required variables are
present and valid. If the configuration is incorrect, a message is emitted
to the log that this configuration section is incorrect and this uci
configuration section is omitted.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/18641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ucode-based wifi interface validation is based on `hostapd.conf`
specific options, which means it's missing the OpenWrt-specific
'network' property.
This causes schema validation warnings like:
```
daemon.notice netifd: radio1 (1340): wifi-scripts: network is not present in the schema
```
The description is taken from the OpenWrt wiki:
https://openwrt.org/docs/guide-user/network/wifi/basic#common_options1
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18946
Signed-off-by: Robert Marko <robimarko@gmail.com>
Support new libpcap dependency and drop an old kernel version dependency.
Also improve formatting and avoid using unneeded deferred make variables.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The initial 6.12 merge leaves package/zram menuconfig behaviour confusing.
Selecting "kmod-zram" opens a submenu of the available algorithms to build
and the actual algo to use. However, when "lzo-rle" is shown as the default
used, it still remains missing from the available list. Only enabling a
_different_ compression algo to build will also reveal "lzo-rle" as
available.
Update the Kconfig to show "lzo-rle" as available if used/referenced.
Fixes: 4708057e27 ("package/zram: update for kernel 6.12")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18712
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
263a0cb87b50 udebug: use proper libudebug API
ca9b8765aea3 dns: rework packet API
ea40cfdf7eb0 cache: send multiple queries in a single packet
d62813727e53 cache: add explicit lookup for host addresses
0ce73d80dc0c dns: add cache/queue for outgoing queries
083be33749b1 cache: improve service refresh behavior
55d0c1bc1ac5 interface: ask for unicast responses by default
ce508467a533 service: add support for setting service specific hostname
632953a1582d interface: when interface properties change, reinitialise
695ac3708aa0 ubus: fix ubus announcements txt fields
cecbe1c0caae Make mdns responder case-insensitive.
2b28094d31ca dns: add support for reverse address mapping queries
Signed-off-by: Felix Fietkau <nbd@nbd.name>
By OpenWrt's design, hostapd runs in a single global instance for all radios supported by the device, rather than one instance per radio like hostapd usually does.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/18426
Signed-off-by: Robert Marko <robimarko@gmail.com>
Manually refreshed:
301-mesh-noscan.patch
601-ucode_support.patch
770-radius_server.patch
Automatically rebased all other patches.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/18426
Signed-off-by: Robert Marko <robimarko@gmail.com>
The driver tries to access ioports (0x2f9!!) which UML doesn't have.
This causes lots of warnings to appear on boot:
| WARNING: CPU: 0 PID: 1 at lib/logic_iomem.c:188 serial8250_config_port+0x20a/0x1260
| Invalid writeqb of 0xff at address 2f9
| Modules linked in:
| CPU: 0 UID: 0 PID: 1 Comm: swapper Tainted: G W 6.12.25 #0
| Tainted: [W]=WARN
| Stack:
| Call Trace:
| [<60001000>] ? set_reset_devices+0x0/0x16
| [<60452cba>] ? serial8250_config_port+0x20a/0x1260
| [<6071e91f>] ? dump_stack_lvl+0x55/0x71
| [<606e127c>] ? _printk+0x0/0x4f
| [<60044bbb>] ? __warn+0x11b/0x120
| [<6003b5d0>] ? um_set_signals+0x0/0x40
| [<606de721>] ? warn_slowpath_fmt+0x81/0x8c
| [<606de6a0>] ? warn_slowpath_fmt+0x0/0x8c
| [<60452cba>] ? serial8250_config_port+0x20a/0x1260
(they are even recursive!)
Now, the situation gets more confusing. Because from what I can tell,
this was seemingly done intenionally. Upstream patches in related areas:
|commit ddd268c42871b78c75e12a5c28207fb481138f41
|Author: Niklas Schnelle <schnelle@linux.ibm.com>
|Date: Wed Apr 3 14:43:00 2024 +0200
|
| um: Select HAS_IOREMAP for UML_IOMEM_EMULATION
|
| In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
| compile time. UML supports these via its UML_IOMEM_EMULATION so let that
| select HAS_IOPORT and also reflect this in NO_IOPORT_MAP.
hint that there's ongoing work in this area. But unfortunately, this future
hasn't arrived yet. Once this future arrives, please nuke this patch.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Add an additional bootmenu option and commands to overwrite the GPT
table with the custom one for upstream U-Boot.
This is needed as the pre-installed GPT table differ and updating the
GPT table is a requirement to install the upstream U-Boot (or the old
U-Boot will be loaded)
To make the migration to new U-Boot bootloader an user can now load the
system with mtk_uartboot and select "Load GPT Table ..." in conjunction
with other update command.
Link: https://github.com/openwrt/openwrt/pull/18874
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ALFA Network AP120C-AX is a dual-band ceiling AP, based on Qualcomm
IPQ6000 + QCN5021 + QCN5052 + QCA8072 chipsets bundle.
Specifications:
- SOC: Qualcomm IPQ6000 (quad-core Cortex-A53 1.2 GHz)
- DRAM: DDR3 512 MB (Micron MT41K256M16TW-107)
- Flash: 16 MB SPI NOR (Macronix MX25U12832F, boot device)
128 MB NAND (Macronix MX30UF1G18AC, dual-firmware)
- Ethernet: 2x 10/100/1000 Mbps Ethernet (QCA8072)
802.3at/af PoE input in WAN port
- Wi-Fi: 2x2 2.4 GHz Wi-Fi 6 (QCN5021 + RFFM8227 FEM)
2x2 5 GHz Wi-Fi 6 (QCN5152 + QPF4568 FEM)
- Antenna: for indoor version: dual-band, internal
2x (or 4x) U.FL antenna connectors on the PCB
- LED: for indoor/outdoor versions: 5x on external module (status,
2x Wi-Fi, 2x Ethernet), PoE LED on-board
8-pin on-board header for LED module (1.27 mm pitch, J14)
- Button: 1x button (reset)
- USB: 1x 4-pin on-board header for USB 2.0 (2.54 mm pitch, J22)
- UART: 1x micro USB Type-B for system console (Holtek HT42B534)
1x 4-pin on-board header (2.54 mm pitch, J11)
- Power: 802.3at/af PoE or 12 V DC/2 A (DC jack)
- Other: 8-pin and 4-pin on-board headers for external Bluetooth
module (1.27 mm pitch, J15, J16, unavailable, thus untested)
MAC addresses:
- WAN: 00:c0:ca:xx:xx:6c (art 0x0, device's label -2)
- LAN: 00:c0:ca:xx:xx:6d (art 0x6, device's label -1)
- 2.4 GHz (IPQ6000): 00:c0:ca:xx:xx:6e (art 0xc, device's label)
- 5 GHz (IPQ6000): 00:c0:ca:xx:xx:6f (device's label + 1)
Flash instructions:
Due to the lack of direct GUI based update capability and dual-firmware
partition configuration, it is recommended to use TFTP + serial console
based approach (console is available in micro USB connector):
1. Set a static IP 192.168.1.1/24 on PC and start TFTP server with the
'...-factory.ubi' image renamed to 'firmware.bin'.
2. Make sure you can access board's serial console over micro USB.
3. Power up the device, hit any key to enter U-Boot CLI and issue below
commands.
3.1 Restore U-Boot's environment to default values (double check first
the '0:APPSBLENV' partition offset using 'smem' command):
sf probe
sf erase 0x510000 0x10000
saveenv
3.2 Download and install OpenWrt in both partitions and reset the board:
tftpb 0x44000000 firmware.bin
flash rootfs
flash rootfs_1
reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Replace bootmenu shortmenu mediatek patch with a better version proposed
upstream that implement a more clean implementation.
Also the mediatek patch seems to be bugged and with lots of bootmenu
elements it's gets very bugged and unusable.
Refresh any affected patch.
Upstream-Status: Submitted [https://lore.kernel.org/u-boot/20250525134407.3760-1-ansuelsmth@gmail.com/]
Link: https://github.com/openwrt/openwrt/pull/18919
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This allows us to use the full size of nand, which increases ubi size
from 64M to 122.25M.
If you are at factory firmware, please refer commit 63b8d98dd0 ("mediatek: add support for Cudy TR3000 v1")
to boot into OpenWrt initramfs (stock layout).
Flash instructions:
1. Login into the device and backup everything, especially 'Factory' part.
1. Unlock mtd partitions:
apk update && apk add kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
3. Write new BL2 and FIP
mtd write openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-preloader.bin BL2
mtd write openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Tested-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Some MBIM devices can exist on an MHI bus (over PCIe) instead of being presented as USB devices.
In such cases the interface name lookup needs to be done from /sys/class/wwan/ instead of /sys/class/usbmisc/
Add another readlink call in case the first lookup fails.
This allows the MBIM protocol to find the interface name and then work with both type of devices provided that /etc/config/network has the right device for MBIM interface (such as /dev/wwan0mbim0 in case of MHI)
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
The device manufacturer name for Qualcomm Atheros is listed
as "Qualcomm, Atheros" for PCI devices but "Qualcomm Atheros" under
"compatible". This gives inconsistent results in `iwinfo` and
```
Hardware: 0x168c:0x0046 0x168c:0xcafe [Qualcomm, Atheros QCA9984]
Hardware: embedded [Qualcomm Atheros IPQ8074]
```
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
The 'unknown' string was misspelled as 'unknonw'.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add 'dBm' units to 'Signal' and 'Noise' to match what non-ucode iwinfo shows.
Before:
Signal: -49 Noise: -103
After:
Signal: -49 dBm Noise: -103 dBm
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
