Updating the spi-qpic-snand driver with the latest patches sent
upstream and remove custom patches.
These patches add error handling fixes, use of right read location in
read ops, removal of unused variable, ability to read user config and
nand chip requirements, and support for 8bits ECC strength.
Tested on: Gl.iNet GL-B3000 & Linksys MR5500, MX2000, MX5500, SPNMX56
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18723
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update block NVMEM driver based on backported OF partition support.
Note the different MMC card DT binding compared to the previous
downstream solution: Instead of having a 'partitions' subnode inside
a 'block' node, the 'partitions' node now resides directly under the
node representing the card.
In order to make references to the 'boot0' or 'boot1' hw partitions
you will have to define 'partitions-boot0' or 'partitions-boot1', and
move the NVMEM layout into a partition (you may, of course, use
'fixed-partitions' for that, and cover the whole device, if needed).
See also https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/mmc/mmc-card.yaml?h=v6.13
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- Fix order of patches (3d483a10327f was merged before 34d5a86ff7bb).
- Reorganize patch numbers now that < 6.12 patches are no longer needed.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This patch was added on linux v6.13 in order to avoid simple is_visible
functions on hwmon drivers.
See 79bc0af904
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Upstream e2015942e90a couldn't be backported to 6.6 because the following
symbols were missing:
- disable_work
- disable_work_sync
- enable_work
See e2015942e9
Upstream 34e5ededf4b8 couldn't be backported to 6.6 because the following
symbol was missing:
- pcim_iomap_region
See 34e5ededf4
Reorganize patch numbers now that < 6.12 patches are no longer needed.
The following patches still differ from upstream:
- e340bff27e63
phy_set_eee_broken symbol is missing in 6.12
https://github.com/torvalds/linux/commit/e340bff27e63
The following patches can't be backported to 6.12 due to missing symbols:
- 5e7a74b6a357
phy_disable_eee_mode symbol is missing in 6.12
https://github.com/torvalds/linux/commit/5e7a74b6a357
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
These symbols were found when adding 6.12 kernel support for the
ath79 target.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18653
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
These get dynamically set, not relevant for targets.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
These symbols only become visible when some packages or kernel debug
options get enabled. Move them to generic.
Co-authored-by: Mantas Pucka <mantas@8devices.com>
Co-authored-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Refreshed patches for generic/hack-6.12 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Refreshed patches for generic/pending-6.12 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move MIPS reloc patch from pending to hack and rework it to adapt to new
kernel 6.12 version.
This required an additional patch. While at it also improve the text
with the original info without cut.
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Refreshed patches for generic/backport-6.12 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16547
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Refreshed patches by running:
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18640
Signed-off-by: Robert Marko <robimarko@gmail.com>
Patch 620-net_sched-codel-do-not-defer-queue-length-update.patch is
actually an ancient patch that somehow manage to be ported for 7 solid
years.
This comes from [1] where a fix patch was proposed. Nobody notice that
the proposed patch was actually rejected upstream in favor of [2]. And
the upstream fix patch is present in kernel from version 4.18.
This means that we were actually fixing for a non existant bug and maybe
introducing regression down the line.
Drop the patch for good as we already have a fix for it in flace for a
long time.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=109581
[2] 35b42da69e
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
To further improve cleanup and maintenance usage, move the kernel
version files to target/linux/generic directory. This permits to self
contain any change to the specific generic directory instead of having
to bload the include directory of periodic changes.
In kernel-version.mk we now use GENERIC_PLATFORM_DIR provided by
target.mk. To make this work, we need to move the inclusion of
kernel-version.mk in target.mk right after GENERIC_PLATFORM_DIR is
defined.
This also comes to permit downstream project to provide a custom generic
directory and specify the kernel version complete of the hash and the
minor version without having to affect other feeds.
In such case both generic and the target directory are provided as feeds
and OpenWrt reference these specific one instead of the generic one.
For downstream it's still suggested and preferable to all match the
shipped generic kernel minor version but this change permits to at least
enforce good practice instead of having to bloat OpenWrt include file of
all kind of downstream changes (making porting to OpenWrt mainline even
more difficult)
Link: https://github.com/openwrt/openwrt/pull/18537
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Patch 87cb0446b7 also applies to higher kernel versions.
To apply to them it has been moved to a separate file in pending.
Fixes: 87cb0446b7 ("generic: fix broken TCP fraglist GRO patch")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18511
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Fix an error while building target/linux x64 on macOS 15.4 host,
due to the PATH_MAX macro being redefined:
mkdir -p /Volumes/test/openwrt/build_dir/target-x86_64_musl/linux-x86_64/linux-6.6.86/tools/objtool && make O=/Volumes/test/openwrt/build_dir/target-x86_64_musl/linux-x86_64/linux-6.6.86 subdir=tools/objtool --no-print-directory -C objtool
exec-cmd.c:15:9: error: 'PATH_MAX' macro redefined [-Werror,-Wmacro-redefined]
15 | #define PATH_MAX 4096
| ^
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/sys/syslimits.h:103:9: note: previous definition is here
103 | #define PATH_MAX 1024 /* max bytes in pathname */
| ^
exec-cmd.c is compiled as part of objtool to run on the host, and
therefore host headers are used, where PATH_MAX is already defined.
Using an old OpenWRT snapshot from 2025-02-16, where linux-6.6.77
used to build correctly, does not help. Reverting from Xcode 16.3 to
16.2 does not help either.
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18530
Signed-off-by: Robert Marko <robimarko@gmail.com>
Upstream version of ARM gc sections skip eeping some section. It was
reported some kernel load hang hence restore what we original did and
introduce a new patch that add the additional entry on top of the
upstream version.
Fixes: #18500
Fixes: 7843f21c51 ("generic: replace ARM gc sections patch with upstream version")
Tested-by: Stefan Kalscheuer <stefan@stklcode.de> (Turris Omnia)
Link: https://github.com/openwrt/openwrt/pull/18503
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Some regression were reported with the backported upstream version. Old
kernel require an additional flush in some case and this was handled in
the old downstream patch.
Reintroduce the flush to fix the regression and refresh affected patch.
Fixes: f63d64ede0 ("generic: move patch from pending to backport")
Link: https://github.com/openwrt/openwrt/pull/18501
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The ATS SFP GT-T quirk patch was backported to stable kernel 6.6 but
was not notice while bumping the kernel version as they listed the quirk
at the bottom of the SFP quirk table while our hack patch put it at the
top.
With migrating to the upstream version, the duplication was made more
apparent.
Drop the double entry for the SFP module as it's already there and not
needed and refresh patches.
Link: https://github.com/openwrt/openwrt/pull/18484
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Replace ARM gc sections patch with upstream version. It seems this
feature is finally supported upstream with some minor difference.
In theory the upstream version should cut even more stuff, this really
needs to be evaluated if it's OK also to handle regression with the
kernel 6.12 update.
Link: https://github.com/openwrt/openwrt/pull/18464
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Replace SFP ignore TX FAULT with upstream version by backporting the 2
related upstream patch. Refresh SFP affected patch.
Link: https://github.com/openwrt/openwrt/pull/18464
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move all patch that got merged upstream from pending to backport and add
related tag. This is to make it easier to update to kernel 6.12.
Patch 680 required some special care as the upstream version had to be
split in a series of 6 patch.
Referesh all affected patch.
Link: https://github.com/openwrt/openwrt/pull/18464
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
It seems new kernel version introduced -Wmissing-prototypes. This new
warning reported drivers that define non static function that are used
statically in the driver.
Fix this by declaring making those function actually static if not
defined in any header and not used outside of the single driver.
Co-authored-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/18455
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
