hurricos/openwrt-mirror
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2026-06-11 05:37:26 -04:00
Code Issues Projects Releases Wiki Activity

mediatek: add support for Routerich BE7200

Browse Source 
This PR adds support for Routerich BE7200 router.

Specification
-------------
- SoC       : MediaTek MT7987A Quad-core ARM Cortex-A53 2.0 GHz
- RAM       : 1024 MiB DDR4
- Flash     : SPI-NAND 512 MiB (Giga Device)
- WLAN      : MediaTek MT7992E, WiFi 7
  - 2.4 GHz : b/g/n/ax, MIMO 4x4
  - 5 GHz   : a/n/ac/ax, MIMO 4x4
- Ethernet  : 10/100/1000 Mbps x3 (LAN, Airoha AN8855AE)
              10/100/1000/2500 Mbps x1 (WAN, SoC internal phy)
- USB       : 3.0 x1
- Buttons   : Mesh, Reset
- LEDs      : 1x Status (blue), gpio-controlled
              1x WiFi (blue), gpio-controlled
              1x mesh (blue), gpio-controlled
              3x LAN activity (blue), gpio-controlled
              1x WAN activity (blue), gpio-controlled
              1x WAN no-link (red), gpio-controlled
- Power     : 12 VDC, 1.5 A

Installation
------------
1. Update stock firmware via the web interface (don't keep settings).

Update U-Boot (optional)
------------------------
After installing OpenWrt, you may want to install opensource U-Boot.
1. Install kmod-mtd-rw:
   apk update && apk add kmod-mtd-rw
2. Unlock bootloader:
   insmod mtd-rw i_want_a_brick=1
   mtd unlock BL2
   mtd unlock FIP
3. Download and write open-source BL2 and FIP:
   cd /tmp
   wget https://.../openwrt-mediatek-filogic-routerich_be7200-preloader.bin
   wget https://.../openwrt-mediatek-filogic-routerich_be7200-bl31-uboot.fip
   mtd write /tmp/openwrt-mediatek-filogic-routerich_be7200-preloader.bin BL2
   mtd write /tmp/openwrt-mediatek-filogic-routerich_be7200-bl31-uboot.fip FIP
4. Reboot the router.

Return to stock
---------------
1. Update OpenWrt wirh the vendor's firmware (don't keep settings).

Recovery (original U-Boot)
-----------------------------
1. Press Reset button and power on the router. After ~10 sec release
   the button;
2. Upload and flash squashfs-sysupgrade.itb image via the web interface.

Recovery (open-source U-Boot)
-----------------------------
1. Place OpenWrt
   'openwrt-mediatek-filogic-routerich_be7200-initramfs-recovery.itb'
   image on the tftp server (IP: 192.168.1.254)
2. Press Reset button and power on the router. After ~10 sec release
   the button.
3. Use OpenWrt initramfs system for recovery

Recovery (full disaster)
------------------------
Use UART and mtk_uartboot tool.
Link: https://github.com/981213/mtk_uartboot

USB power control
-----------------
Disable: echo disabled > /sys/devices/platform/usb-power/state
Enable: echo enabled > /sys/devices/platform/usb-power/state

UART
----
UART pins are silkscreened on the PCB. Don't connect Vcc.
Serial connection parameters: 115200, 8n1, 3.3V

MAC addresses
-------------
+---------+-------------------+-----------+
|         | MAC               | Algorithm |
+---------+-------------------+-----------+
| WAN     | 24:0f:5e:xx:xx:30 | label     |
| LAN     | 24:0f:5e:xx:xx:31 | label+1   |
| WLAN 2g | 24:0f:5e:xx:xx:32 | label+2   |
| WLAN 5g | 24:0f:5e:xx:xx:33 | label+3   |
+---------+-------------------+-----------+
The WLAN 2g MAC was found in 'Factory', 0x4

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21235
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Mikhail Zhilkin
2025-12-20 18:43:45 +03:00
committed by Hauke Mehrtens
parent 8398a03e29
commit ff5e66a920
8 changed files with 904 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
package/boot/uboot-mediatek/Makefile
View File

@@ -881,6 +881,17 @@ define U-Boot/mt7987_bananapi_bpi-r4-lite-nor
FIP_COMPRESS:=1
endef
define U-Boot/mt7987_routerich_be7200
NAME:=Routerich BE7200
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=routerich_be7200
UBOOT_CONFIG:=mt7987a_routerich_be7200
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=spim-nand0
BL2_SOC:=mt7987
DEPENDS:=+trusted-firmware-a-mt7987-spim-nand0
endef
define U-Boot/mt7988_arcadyan_mozart
NAME:=Arcadyan Mozart
BUILD_SUBTARGET:=filogic
@@ -1152,6 +1163,7 @@ UBOOT_TARGETS := \
mt7987_rfb-emmc \
mt7987_rfb-sd \
mt7987_rfb-spim-nand \
mt7987_routerich_be7200 \
mt7988_arcadyan_mozart \
mt7988_asus_zenwifi-bt8 \
mt7988_bananapi_bpi-r4-emmc \

373
package/boot/uboot-mediatek/patches/467-add-routerich-be7200.patch Normal file
View File

@@ -0,0 +1,373 @@
--- /dev/null
+++ b/configs/mt7987a_routerich_be7200_defconfig
@@ -0,0 +1,133 @@
+CONFIG_ARM=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x41e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="mt7987a-routerich_be7200"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_TARGET_MT7987=y
+CONFIG_CPU_ARMV8=y
+CONFIG_SYS_BOOTM_LEN=0x6000000
+CONFIG_SYS_LOAD_ADDR=0x48000000
+CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
+CONFIG_DEBUG_UART_BASE=0x11000000
+CONFIG_DEBUG_UART_CLOCK=40000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_AUTOBOOT_MENU_SHOW=y
+CONFIG_DEFAULT_FDT_FILE="mt7987a-routerich_be7200"
+CONFIG_SYS_CBSIZE=512
+CONFIG_SYS_PBSIZE=1049
+CONFIG_LOGLEVEL=7
+CONFIG_PRE_CONSOLE_BUFFER=y
+CONFIG_LOG=y
+# CONFIG_BOARD_INIT is not set
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="MT7987> "
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
+CONFIG_CMD_LICENSE=y
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_ENV_FLAGS=y
+CONFIG_CMD_STRINGS=y
+CONFIG_CMD_CPU=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_PWM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_PSTORE=y
+CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
+CONFIG_CMD_UUID=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_UBI_RENAME=y
+# CONFIG_CMD_XIMG is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_ENV_REDUNDANT=y
+CONFIG_ENV_UBI_PART="ubi"
+CONFIG_ENV_UBI_VOLUME="ubootenv"
+CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
+CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
+CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/routerich_be7200_env"
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NETCONSOLE=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.1.1"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.1.254"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_CLK=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MTK=y
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_PHY_ETHERNET_ID=y
+CONFIG_PHY_FIXED=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PHY=y
+CONFIG_PHY_MTK_TPHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7987=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_MTK=y
+CONFIG_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MTK_SPIM=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MTK=y
+CONFIG_USB_STORAGE=y
+CONFIG_ZSTD=y
+CONFIG_HEXDUMP=y
--- /dev/null
+++ b/defenvs/routerich_be7200_env
@@ -0,0 +1,57 @@
+ipaddr=192.168.1.1
+serverip=192.168.1.254
+loadaddr=0x48000000
+console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
+bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
+bootconf=config-1
+bootdelay=0
+bootfile=openwrt-mediatek-filogic-routerich_be7200-initramfs-recovery.itb
+bootfile_bl2=openwrt-mediatek-filogic-routerich_be7200-preloader.bin
+bootfile_fip=openwrt-mediatek-filogic-routerich_be7200-bl31-uboot.fip
+bootfile_upg=openwrt-mediatek-filogic-routerich_be7200-squashfs-sysupgrade.itb
+bootled_status=blue:status
+bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
+bootmenu_default=0
+bootmenu_delay=0
+bootmenu_title= ( ( ( OpenWrt ) ) )
+bootmenu_0=Initialize environment.=run _firstboot
+bootmenu_0d=Run default boot command.=run boot_default
+bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
+bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
+bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
+bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
+bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
+bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
+bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
+bootmenu_8=Reboot.=reset
+bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
+boot_first=if button reset ; then led $bootled_status on ; run boot_default ; fi ; bootmenu
+boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
+boot_production=led $bootled_status on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led bootled_status off
+boot_recovery=led $bootled_status on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led bootled_status off
+boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
+boot_tftp_forever=led $bootled_status on ; while true ; do run boot_tftp ; sleep 1 ; done
+boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
+boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
+boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
+boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
+boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
+check_buttons=if button reset ; then run boot_tftp ; fi
+ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x40080004 0x6 ; setenv ethaddr_factory
+part_default=production
+part_recovery=recovery
+reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
+mtd_write_fip=mtd erase FIP && mtd write FIP $loadaddr
+mtd_write_bl2=mtd erase BL2 && mtd write BL2 $loadaddr
+ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
+ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
+ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
+ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
+ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
+ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
+ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
+ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
+_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
+_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
+_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
+_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"
--- /dev/null
+++ b/arch/arm/dts/mt7987a-routerich_be7200.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025
+ * Author: Mikhail Zhilkin <csharper2005@gmail.com>
+ */
+
+/dts-v1/;
+#include "mt7987a.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Routerich BE7200";
+ compatible = "routerich,be7200",
+ "mediatek,mt7987";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-0 {
+ label = "mesh";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+
+ button-1 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "blue:status";
+ gpios = <&pio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ label = "blue:wlan5g";
+ gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ label = "blue:mesh";
+ gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ label = "red:wan";
+ gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ label = "blue:wan";
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ label = "blue:lan3";
+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ label = "blue:lan2";
+ gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ label = "blue:lan1";
+ gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1138,6 +1138,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7986b-emmc-rfb.dtb \
mt7987a-emmc-rfb.dtb \
mt7987a-rfb.dtb \
+ mt7987a-routerich_be7200.dtb \
mt7987a-sd-rfb.dtb \
mt7988-rfb.dtb \
mt7988-sd-rfb.dtb \
--- /dev/null
+++ b/arch/arm/dts/mt7987a-routerich_be7200-u-boot.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025
+ * Author: Mikhail Zhilkin <csharper2005@gmail.com>
+ */
+
+#include "mt7987a-u-boot.dtsi"
+#include "mt7987-netsys-u-boot.dtsi"
+
+/ {
+ model = "Routerich BE7200";
+ compatible = "routerich,be7200",
+ "mediatek,mt7987";
+};
+
+&eth0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio0_pins>;
+ phy-mode = "2500base-x";
+ mediatek,switch = "auto";
+ reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ must_tx;
+ enhance_timing;
+ dma_ext;
+ ipm_design;
+ support_quad;
+ tick_dly = <2>;
+ sample_sel = <0>;
+
+ spi_nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "BL2";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "u-boot-env (unused)";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition@180000 {
+ label = "Factory";
+ reg = <0x180000 0x400000>;
+ };
+
+ partition@580000 {
+ label = "FIP";
+ reg = <0x580000 0x200000>;
+ };
+
+ partition@780000 {
+ label = "ubi";
+ reg = <0x780000 0x1f880000>;
+ compatible = "linux,ubi";
+ };
+ };
+ };
+};

1
package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic
View File

@@ -42,6 +42,7 @@ nokia,ea0326gmp|\
openwrt,one|\
qihoo,360t7|\
routerich,ax3000-ubootmod|\
routerich,be7200|\
snr,snr-cpe-ax2|\
tplink,tl-xdr4288|\
tplink,tl-xdr6086|\