mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-11-03 22:44:27 -05:00
mediatek: filogic: add Adtran SmartRG Mount Stuart series
Common specifications: * Mediatek MT7988A (4x Cortex-A73, up to 1.8 GHz clock speed) * 8 GiB eMMC * 2 GiB DDR4 RAM * 1x 10000M/1000M/100M + 3x 1000M/100M/10M LAN ports * MT7996 Tri-band (2.4G, 5G, 6G) 4T4R 802.11be Wi-Fi * Airoha AG3352 GPS * Renesas DA14531MOD Bluetooth * 2 buttons (Reset, Mesh/WPS) * uC-controlled RGB LED via I2C * 2x LED for each 1G port, 3x LED for each 10G port * USB 3.0 type A port * 3.3V-level 115200 baud UART console via 4-pin Dupont connector exposed at the bottom of the device * USB-C PD power input SDG-8733: 1x 10000M/1000M/100M WAN port SDG-8734: 1x USXGMII/10GBase-R/5GBase-R/2500Base-X/1000Base-X/SGMII SFP+ Both models are also available in versions including 2x FXS POTS interfaces for analog phones. Those interfaces are not supported by OpenWrt. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle
parent
c82e106313
commit
c71b68acdd
@ -109,6 +109,11 @@ openembed,som7981)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000"
|
||||
ubootenv_add_uci_sys_config "/dev/mtd3" "0x0" "0x100000" "0x100000"
|
||||
;;
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8734)
|
||||
local envdev=$(find_mmc_part "u-boot-env" "mmcblk0")
|
||||
ubootenv_add_uci_config "$envdev" "0x0" "0x8000" "0x8000"
|
||||
;;
|
||||
ubnt,unifi-6-plus)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
|
||||
;;
|
||||
|
||||
17
target/linux/mediatek/dts/mt7988a-smartrg-SDG-8733.dts
Normal file
17
target/linux/mediatek/dts/mt7988a-smartrg-SDG-8733.dts
Normal file
@ -0,0 +1,17 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2023 SmartRG Inc.
|
||||
* Author: Chad Monroe <chad.monroe@smartrg.com>
|
||||
*/
|
||||
|
||||
#include "mt7988a-smartrg-mt-stuart.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SmartRG SDG-8733";
|
||||
compatible = "smartrg,sdg-8733", "mediatek,mt7988a";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-connection-type = "usxgmii";
|
||||
phy = <&phy0>;
|
||||
};
|
||||
57
target/linux/mediatek/dts/mt7988a-smartrg-SDG-8734.dts
Normal file
57
target/linux/mediatek/dts/mt7988a-smartrg-SDG-8734.dts
Normal file
@ -0,0 +1,57 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2023 SmartRG Inc.
|
||||
* Author: Chad Monroe <chad.monroe@smartrg.com>
|
||||
*/
|
||||
|
||||
#include "mt7988a-smartrg-mt-stuart.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SmartRG SDG-8734";
|
||||
compatible = "smartrg,sdg-8734", "mediatek,mt7988a";
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sfp_green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = "sfp";
|
||||
gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sfp_red {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = "sfp";
|
||||
gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_sfp1: i2c-gpio-0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sfp_i2c_pins>;
|
||||
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&pio 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&pio 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
sfp1: sfp1 {
|
||||
compatible = "sff,sfp";
|
||||
i2c-bus = <&i2c_sfp1>;
|
||||
los-gpios = <&pio 32 GPIO_ACTIVE_HIGH>;
|
||||
mod-def0-gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
rate-select0-gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
|
||||
rate-select1-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
|
||||
tx-disable-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
|
||||
tx-fault-gpios = <&pio 37 GPIO_ACTIVE_HIGH>;
|
||||
maximum-power-milliwatt = <4000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
sfp = <&sfp1>;
|
||||
managed = "in-band-status";
|
||||
};
|
||||
684
target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi
Normal file
684
target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi
Normal file
@ -0,0 +1,684 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2023 SmartRG Inc.
|
||||
* Author: Chad Monroe <chad.monroe@smartrg.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7988a.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/mt65xx.h>
|
||||
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
led-boot = &led_sys_green;
|
||||
led-failsafe = &led_sys_blue;
|
||||
led-running = &led_sys_white;
|
||||
led-upgrade = &led_sys_red;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
bootargs = "console=ttyS0,115200n1 loglevel=8 pci=pcie_bus_perf root=PARTLABEL=rootfs";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x0 0x40000000 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
/delete-node/ramoops@42ff0000;
|
||||
|
||||
bootdata@45000000 {
|
||||
no-map;
|
||||
reg = <0x0 0x45000000 0x0 0x00001000>;
|
||||
};
|
||||
|
||||
ramoops_reserved: ramoops@45001000 {
|
||||
no-map;
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0x45001000 0x0 0x00140000>;
|
||||
ftrace-size = <0x20000>;
|
||||
record-size = <0x20000>;
|
||||
console-size = <0x20000>;
|
||||
pmsg-size = <0x80000>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
|
||||
factory {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "sync";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
bluetooth_reset {
|
||||
gpio-export,name = "bt_reset";
|
||||
gpio-export,direction_may_change;
|
||||
gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
bluetooth_txrx_ctl {
|
||||
gpio-export,name = "bt_txrx_ctl";
|
||||
gpio-export,direction_may_change;
|
||||
gpios = <&pio 74 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gps_enable {
|
||||
gpio-export,name = "gps_enable";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
slic_interrupt {
|
||||
gpio-export,name = "slic_interrupt";
|
||||
gpio-export,direction_may_change;
|
||||
gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
slic_reset {
|
||||
gpio-export,name = "slic_reset";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&pio 72 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb_enable {
|
||||
gpio-export,name = "usb_enable";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&pio 63 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
&cci {
|
||||
proc-supply = <&rt5190_buck3>;
|
||||
};
|
||||
|
||||
&cpu_thermal {
|
||||
/delete-node/cooling-maps;
|
||||
/delete-node/trips;
|
||||
|
||||
trips {
|
||||
cpu_trip_crit: crit {
|
||||
temperature = <125000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
|
||||
cpu_trip_hot: hot {
|
||||
temperature = <120000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
cpu_trip_active_high: active-high {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_trip_active_med: active-med {
|
||||
temperature = <80000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_trip_active_low: active-low {
|
||||
temperature = <60000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_trip_active_silent: active-silent {
|
||||
temperature = <40000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
cpu-active-high {
|
||||
/* active: set fan to cooling level 3 */
|
||||
cooling-device = <&fan 3 3>;
|
||||
trip = <&cpu_trip_active_high>;
|
||||
};
|
||||
|
||||
cpu-active-med {
|
||||
/* active: set fan to cooling level 2 */
|
||||
cooling-device = <&fan 2 2>;
|
||||
trip = <&cpu_trip_active_med>;
|
||||
};
|
||||
|
||||
cpu-active-low {
|
||||
/* active: set fan to cooling level 1 */
|
||||
cooling-device = <&fan 1 1>;
|
||||
trip = <&cpu_trip_active_low>;
|
||||
};
|
||||
|
||||
cpu-active-silent {
|
||||
/* active: set fan to cooling level 0 */
|
||||
cooling-device = <&fan 0 0>;
|
||||
trip = <&cpu_trip_active_silent>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fan {
|
||||
pwms = <&pwm 0 40000 0>;
|
||||
|
||||
/**
|
||||
* set fan speed
|
||||
*
|
||||
* 0 = off
|
||||
* 61 = 24% duty cycle
|
||||
* 77 = 30% duty cycle
|
||||
* 102 = 40% duty cycle
|
||||
* 128 - 50% duty cycle
|
||||
* 255 = 100% duty cycle
|
||||
*/
|
||||
cooling-levels = <61 77 102 128>;
|
||||
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
|
||||
pulses-per-revolution = <2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
label = "wan";
|
||||
status = "okay";
|
||||
phy-mode = "usxgmii";
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
label = "lan1";
|
||||
status = "okay";
|
||||
phy-mode = "usxgmii";
|
||||
phy-connection-type = "usxgmii";
|
||||
phy = <&phy8>;
|
||||
};
|
||||
|
||||
&gsw_phy0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gsw_phy1 {
|
||||
pinctrl-names = "gbe-led";
|
||||
pinctrl-0 = <&gbe1_led0_pins>, <&gbe1_led1_pins>;
|
||||
};
|
||||
|
||||
&gsw_phy1_led0 {
|
||||
status = "okay";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
&gsw_phy1_led1 {
|
||||
status = "okay";
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
};
|
||||
|
||||
&gsw_phy2 {
|
||||
pinctrl-names = "gbe-led";
|
||||
pinctrl-0 = <&gbe2_led0_pins>, <&gbe2_led1_pins>;
|
||||
};
|
||||
|
||||
&gsw_phy2_led0 {
|
||||
status = "okay";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
&gsw_phy2_led1 {
|
||||
status = "okay";
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
};
|
||||
|
||||
&gsw_phy3 {
|
||||
pinctrl-names = "gbe-led";
|
||||
pinctrl-0 = <&gbe3_led0_pins>, <&gbe3_led1_pins>;
|
||||
};
|
||||
|
||||
&gsw_phy3_led0 {
|
||||
status = "okay";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
&gsw_phy3_led1 {
|
||||
status = "okay";
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
|
||||
rt5190a_64: rt5190a@64 {
|
||||
compatible = "richtek,rt5190a";
|
||||
reg = <0x64>;
|
||||
/*interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;*/
|
||||
vin2-supply = <&rt5190_buck1>;
|
||||
vin3-supply = <&rt5190_buck1>;
|
||||
vin4-supply = <&rt5190_buck1>;
|
||||
|
||||
regulators {
|
||||
rt5190_buck1: buck1 {
|
||||
regulator-name = "rt5190a-buck1";
|
||||
regulator-min-microvolt = <5090000>;
|
||||
regulator-max-microvolt = <5090000>;
|
||||
regulator-allowed-modes =
|
||||
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
buck2 {
|
||||
regulator-name = "vcore";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
rt5190_buck3: buck3 {
|
||||
regulator-name = "vproc";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
buck4 {
|
||||
regulator-name = "rt5190a-buck4";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-allowed-modes =
|
||||
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
ldo {
|
||||
regulator-name = "rt5190a-ldo";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
status = "okay";
|
||||
|
||||
system-leds {
|
||||
compatible = "srg,sysled";
|
||||
reg = <0x30>;
|
||||
|
||||
led_sys_red: system_red {
|
||||
label = "red";
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
led_sys_green: system_green {
|
||||
label = "green";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
led_sys_blue: system_blue {
|
||||
label = "blue";
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
led_sys_white: system_white {
|
||||
label = "white";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
phy0: ethernet-phy@0 {
|
||||
/* AQR113C */
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
reg = <0>;
|
||||
|
||||
reset-gpios = <&pio 62 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <100000>;
|
||||
reset-deassert-us = <1000000>;
|
||||
|
||||
leds {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_ORANGE>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
phy8: ethernet-phy@8 {
|
||||
/* AQR113C */
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
reg = <8>;
|
||||
|
||||
reset-gpios = <&pio 71 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <100000>;
|
||||
reset-deassert-us = <1000000>;
|
||||
|
||||
leds {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_ORANGE>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc0_pins_emmc_51>;
|
||||
pinctrl-1 = <&mmc0_pins_emmc_51>;
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
hs400-ds-delay = <0x12814>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
card@0 {
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
compatible = "mmc-card";
|
||||
reg = <0>;
|
||||
|
||||
block {
|
||||
compatible = "block-device";
|
||||
|
||||
partitions {
|
||||
block-partition-factory {
|
||||
partname = "factory";
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1e00>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_1_pins>;
|
||||
reset-gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
pcie@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
|
||||
mt7996@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
ieee80211-freq-limit = <2400000 2500000>, <5170000 5835000>, <5945000 7125000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pio {
|
||||
button_pins: button-pins {
|
||||
pins = "GPIO_RESET", "GPIO_WPS";
|
||||
mediatek,pull-down-adv = <0>; /* bias-disable */
|
||||
};
|
||||
|
||||
pcie0_1_pins: pcie0-pins-g1 {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0";
|
||||
};
|
||||
};
|
||||
|
||||
pwm_pins: pwm-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm0", "pwm1";
|
||||
};
|
||||
};
|
||||
|
||||
sfp_i2c_pins: sfp-i2c-pins {
|
||||
conf-scl {
|
||||
pins = "LED_A";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <1>;
|
||||
};
|
||||
conf-sda {
|
||||
pins = "LED_E";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
uart1_pins: uart1-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart1_2";
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart2";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "disabled";
|
||||
|
||||
spi_nand: spi_nand@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-buswidth = <4>;
|
||||
spi-rx-buswidth = <4>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&ssusb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssusb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
label = "lan4";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
status = "okay";
|
||||
|
||||
/* Airoha AG3352 GPS */
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
status = "okay";
|
||||
|
||||
/* DA14531MOD Bluetooth */
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xphy {
|
||||
status = "okay";
|
||||
};
|
||||
@ -72,6 +72,21 @@ routerich,ax3000)
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
|
||||
ucidef_set_led_netdev "wan-off" "wan-off" "red:wan" "wan" "link"
|
||||
;;
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8734)
|
||||
ucidef_set_led_netdev "lan-1-green" "LAN1" "mdio-bus:08:green:lan" "lan1" "link_2500 link_5000"
|
||||
ucidef_set_led_netdev "lan-1-orange" "LAN1" "mdio-bus:08:orange:lan" "lan1" "link_100 link_1000"
|
||||
ucidef_set_led_netdev "lan-1-white" "LAN1" "mdio-bus:08:white:lan" "lan1" "link_10000"
|
||||
ucidef_set_led_netdev "lan-2-green" "LAN2" "mt7530-0:01:green:lan" "lan2" "link_1000"
|
||||
ucidef_set_led_netdev "lan-2-amber" "LAN2" "mt7530-0:01:amber:lan" "lan2" "link_100 link_10"
|
||||
ucidef_set_led_netdev "lan-3-green" "LAN3" "mt7530-0:02:green:lan" "lan3" "link_1000"
|
||||
ucidef_set_led_netdev "lan-3-amber" "LAN3" "mt7530-0:02:amber:lan" "lan3" "link_100 link_10"
|
||||
ucidef_set_led_netdev "lan-4-green" "LAN4" "mt7530-0:03:green:lan" "lan4" "link_1000"
|
||||
ucidef_set_led_netdev "lan-4-amber" "LAN4" "mt7530-0:03:amber:lan" "lan4" "link_100 link_10"
|
||||
ucidef_set_led_netdev "wan-green" "WAN" "mdio-bus:00:green:wan" "wan" "link_2500 link_5000"
|
||||
ucidef_set_led_netdev "wan-orange" "WAN" "mdio-bus:00:orange:wan" "wan" "link_100 link_1000"
|
||||
ucidef_set_led_netdev "wan-white" "WAN" "mdio-bus:00:white:wan" "wan" "link_10000"
|
||||
;;
|
||||
xiaomi,mi-router-wr30u-stock|\
|
||||
xiaomi,mi-router-wr30u-ubootmod)
|
||||
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
|
||||
|
||||
@ -166,7 +166,9 @@ mediatek_setup_macs()
|
||||
smartrg,sdg-8612|\
|
||||
smartrg,sdg-8614|\
|
||||
smartrg,sdg-8622|\
|
||||
smartrg,sdg-8632)
|
||||
smartrg,sdg-8632|\
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8734)
|
||||
label_mac=$(mmc_get_mac_ascii mfginfo MFG_MAC)
|
||||
wan_mac=$label_mac
|
||||
lan_mac=$(macaddr_add "$label_mac" 1)
|
||||
|
||||
@ -136,6 +136,12 @@ case "$board" in
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "2" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8634)
|
||||
addr=$(mmc_get_mac_ascii mfginfo MFG_MAC)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr a > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "2" ] && macaddr_add $addr 6 > /sys${DEVPATH}/macaddress
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088)
|
||||
|
||||
@ -22,7 +22,9 @@ preinit_set_mac_address() {
|
||||
ip link set dev eth1 address "$(macaddr_add $addr 1)"
|
||||
;;
|
||||
smartrg,sdg-8612|\
|
||||
smartrg,sdg-8614)
|
||||
smartrg,sdg-8614|\
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8734)
|
||||
addr=$(mmc_get_mac_ascii mfginfo MFG_MAC)
|
||||
lan_addr=$(macaddr_add $addr 1)
|
||||
ip link set dev wan address "$addr"
|
||||
|
||||
@ -68,7 +68,9 @@ platform_do_upgrade() {
|
||||
smartrg,sdg-8612|\
|
||||
smartrg,sdg-8614|\
|
||||
smartrg,sdg-8622|\
|
||||
smartrg,sdg-8632)
|
||||
smartrg,sdg-8632|\
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8734)
|
||||
CI_KERNPART="kernel"
|
||||
CI_ROOTPART="rootfs"
|
||||
emmc_do_upgrade "$1"
|
||||
@ -245,6 +247,8 @@ platform_copy_config() {
|
||||
smartrg,sdg-8614|\
|
||||
smartrg,sdg-8622|\
|
||||
smartrg,sdg-8632|\
|
||||
smartrg,sdg-8733|\
|
||||
smartrg,sdg-8734|\
|
||||
ubnt,unifi-6-plus)
|
||||
emmc_copy_config
|
||||
;;
|
||||
|
||||
@ -140,8 +140,7 @@ TARGET_DEVICES += acer_predator-w6
|
||||
define Device/adtran_smartrg
|
||||
DEVICE_VENDOR := Adtran
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-hwmon-pwmfan \
|
||||
kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
||||
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-hwmon-pwmfan
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
|
||||
@ -149,6 +148,7 @@ define Device/smartrg_sdg-8612
|
||||
$(call Device/adtran_smartrg)
|
||||
DEVICE_MODEL := SDG-8612
|
||||
DEVICE_DTS := mt7986a-smartrg-SDG-8612
|
||||
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += smartrg_sdg-8612
|
||||
|
||||
@ -156,6 +156,7 @@ define Device/smartrg_sdg-8614
|
||||
$(call Device/adtran_smartrg)
|
||||
DEVICE_MODEL := SDG-8614
|
||||
DEVICE_DTS := mt7986a-smartrg-SDG-8614
|
||||
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += smartrg_sdg-8614
|
||||
|
||||
@ -163,7 +164,7 @@ define Device/smartrg_sdg-8622
|
||||
$(call Device/adtran_smartrg)
|
||||
DEVICE_MODEL := SDG-8622
|
||||
DEVICE_DTS := mt7986a-smartrg-SDG-8622
|
||||
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware
|
||||
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware kmod-mt7986-firmware mt7986-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += smartrg_sdg-8622
|
||||
|
||||
@ -171,10 +172,26 @@ define Device/smartrg_sdg-8632
|
||||
$(call Device/adtran_smartrg)
|
||||
DEVICE_MODEL := SDG-8632
|
||||
DEVICE_DTS := mt7986a-smartrg-SDG-8632
|
||||
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware
|
||||
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware kmod-mt7986-firmware mt7986-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += smartrg_sdg-8632
|
||||
|
||||
define Device/smartrg_sdg-8733
|
||||
$(call Device/adtran_smartrg)
|
||||
DEVICE_MODEL := SDG-8733
|
||||
DEVICE_DTS := mt7988a-smartrg-SDG-8733
|
||||
DEVICE_PACKAGES += kmod-mt7996-firmware kmod-phy-aquantia kmod-usb3
|
||||
endef
|
||||
TARGET_DEVICES += smartrg_sdg-8733
|
||||
|
||||
define Device/smartrg_sdg-8734
|
||||
$(call Device/adtran_smartrg)
|
||||
DEVICE_MODEL := SDG-8734
|
||||
DEVICE_DTS := mt7988a-smartrg-SDG-8734
|
||||
DEVICE_PACKAGES += kmod-mt7996-firmware kmod-phy-aquantia kmod-sfp kmod-usb3
|
||||
endef
|
||||
TARGET_DEVICES += smartrg_sdg-8734
|
||||
|
||||
define Device/asus_rt-ax59u
|
||||
DEVICE_VENDOR := ASUS
|
||||
DEVICE_MODEL := RT-AX59U
|
||||
|
||||
Loading…
Reference in New Issue
Block a user