hurricos/openwrt-mirror
1
0
Fork 0
mirror of git://git.openwrt.org/openwrt/openwrt.git synced 2025-11-04 06:54:27 -05:00
Code Issues Projects Releases Wiki Activity

ipq806x: drop 6.1 support

Browse Source 
Drop support for ipq806x for kernel 6.1.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This commit is contained in:
Christian Marangi 2024-04-26 12:27:21 +02:00
parent fd36d4a7ab
commit a04b7cbc40
No known key found for this signature in database
GPG Key ID: AC001D09ADBFEAD7
69 changed files with 0 additions and 15965 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

538
target/linux/ipq806x/config-6.1
View File

@ -1,538 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_ARCH_IPQ40XX is not set
CONFIG_ARCH_KEEP_MEMBLOCK=y
# CONFIG_ARCH_MDM9615 is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_ARCH_MSM8909 is not set
# CONFIG_ARCH_MSM8916 is not set
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM=y
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_GROUP_RELOCS=y
CONFIG_ARM_IPQ806X_FAB_DEVFREQ=y
CONFIG_ARM_KRAIT_CACHE_DEVFREQ=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
CONFIG_ARM_QCOM_SPM_CPUIDLE=y
# CONFIG_ARM_SMMU is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE_OVERRIDE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SPECTRE=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRC8=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_ZSTD=y
CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_GPIO=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DEVFREQ_GOV_PASSIVE=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_OPS=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
CONFIG_DT_IDLE_STATES=y
# CONFIG_DWMAC_GENERIC is not set
CONFIG_DWMAC_IPQ806X=y
# CONFIG_DWMAC_QCOM_ETHQOS is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FWNODE_MDIO=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GLOB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_CDEV=y
CONFIG_GRO_CELLS=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_SMP=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_HWMON=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_QCOM_CCI is not set
CONFIG_I2C_QUP=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
# CONFIG_IPQ_APSS_PLL is not set
# CONFIG_IPQ_GCC_4019 is not set
# CONFIG_IPQ_GCC_6018 is not set
CONFIG_IPQ_GCC_806X=y
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IRQCHIP=y
CONFIG_IRQSTACKS=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KMAP_LOCAL=y
CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
CONFIG_KPSS_XCC=y
CONFIG_KRAITCC=y
CONFIG_KRAIT_CLOCKS=y
CONFIG_KRAIT_L2_ACCESSORS=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_IPQ8064=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
CONFIG_MEMFD_CREATE=y
# CONFIG_MFD_HI6421_SPMI is not set
CONFIG_MFD_QCOM_RPM=y
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_CQHCI=y
CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_MSM=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MSM_GCC_8660=y
# CONFIG_MSM_GCC_8909 is not set
# CONFIG_MSM_GCC_8916 is not set
# CONFIG_MSM_GCC_8939 is not set
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_GCC_8976 is not set
# CONFIG_MSM_GCC_8994 is not set
# CONFIG_MSM_GCC_8996 is not set
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_MSM_GPUCC_8998 is not set
# CONFIG_MSM_IOMMU is not set
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_MMCC_8996 is not set
# CONFIG_MSM_MMCC_8998 is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_QCOMSMEM_PARTS=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=2
CONFIG_NVMEM=y
CONFIG_NVMEM_LAYOUTS=y
CONFIG_NVMEM_QCOM_QFPROM=y
# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_U_BOOT_ENV=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PAGE_POOL=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_QCOM=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCS_XPCS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYLIB_LEDS=y
CONFIG_PHYLINK=y
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
CONFIG_PHY_QCOM_IPQ806X_SATA=y
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_SS is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_APQ8084 is not set
# CONFIG_PINCTRL_IPQ4019 is not set
CONFIG_PINCTRL_IPQ8064=y
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8226 is not set
# CONFIG_PINCTRL_MSM8660 is not set
# CONFIG_PINCTRL_MSM8909 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_SDX65 is not set
CONFIG_PM_DEVFREQ=y
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_PM_OPP=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PRINTK_TIME=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_QCA83XX_PHY=y
# CONFIG_QCM_DISPCC_2290 is not set
# CONFIG_QCM_GCC_2290 is not set
# CONFIG_QCOM_A53PLL is not set
CONFIG_QCOM_ADM=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_CLK_RPM=y
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_CPR is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_QCOM_GENI_SE is not set
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_HFPLL=y
# CONFIG_QCOM_ICC_BWMON is not set
# CONFIG_QCOM_IOMMU is not set
# CONFIG_QCOM_LLCC is not set
CONFIG_QCOM_NET_PHYLIB=y
# CONFIG_QCOM_OCMEM is not set
# CONFIG_QCOM_PDC is not set
# CONFIG_QCOM_RMTFS_MEM is not set
CONFIG_QCOM_RPMCC=y
# CONFIG_QCOM_RPMH is not set
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_QCOM_SMEM=y
# CONFIG_QCOM_SMSM is not set
CONFIG_QCOM_SOCINFO=y
CONFIG_QCOM_SPM=y
# CONFIG_QCOM_STATS is not set
CONFIG_QCOM_TCSR=y
CONFIG_QCOM_TSENS=y
CONFIG_QCOM_WDT=y
# CONFIG_QCS_GCC_404 is not set
# CONFIG_QCS_Q6SSTOP_404 is not set
# CONFIG_QCS_TURING_404 is not set
CONFIG_RANDSTRUCT_NONE=y
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_REGULATOR_QCOM_RPM=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
# CONFIG_SC_CAMCC_7280 is not set
# CONFIG_SC_DISPCC_7180 is not set
# CONFIG_SC_GCC_7180 is not set
# CONFIG_SC_GCC_8280XP is not set
# CONFIG_SC_GPUCC_7180 is not set
# CONFIG_SC_LPASSCC_7280 is not set
# CONFIG_SC_LPASS_CORECC_7180 is not set
# CONFIG_SC_LPASS_CORECC_7280 is not set
# CONFIG_SC_MSS_7180 is not set
# CONFIG_SC_VIDEOCC_7180 is not set
# CONFIG_SDM_CAMCC_845 is not set
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_GCC_660 is not set
# CONFIG_SDM_GCC_845 is not set
# CONFIG_SDM_GPUCC_845 is not set
# CONFIG_SDM_LPASSCC_845 is not set
# CONFIG_SDM_VIDEOCC_845 is not set
# CONFIG_SDX_GCC_65 is not set
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
# CONFIG_SM_CAMCC_8450 is not set
# CONFIG_SM_GCC_8150 is not set
# CONFIG_SM_GCC_8250 is not set
# CONFIG_SM_GCC_8450 is not set
# CONFIG_SM_GPUCC_6350 is not set
# CONFIG_SM_GPUCC_8150 is not set
# CONFIG_SM_GPUCC_8250 is not set
# CONFIG_SM_GPUCC_8350 is not set
# CONFIG_SM_VIDEOCC_8150 is not set
# CONFIG_SM_VIDEOCC_8250 is not set
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_SOC_BUS=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THREAD_INFO_IN_TASK=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
# CONFIG_UCLAMP_TASK is not set
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XXHASH=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y

743
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
View File

@ -1,743 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8062-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "NEC Platforms Aterm WG2600HP3";
compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
memory {
device_type = "memory";
reg = <0x42000000 0x1e000000>;
};
aliases {
label-mac-device = &gmac2;
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_red;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
mode0 {
label = "mode0";
gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
wakeup-source;
};
mode1 {
label = "mode1";
gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&leds_pins>;
pinctrl-names = "default";
led_power_green: power_green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
};
led_power_red: power_red {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
};
active_green {
label = "green:active";
gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
};
active_red {
label = "red:active";
gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
};
wlan2g_green {
label = "green:wlan2g";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
wlan2g_red {
label = "red:wlan2g";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
wlan5g_green {
label = "green:wlan5g";
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g_red {
label = "red:wlan5g";
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
};
tv_green {
label = "green:tv";
gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
};
tv_red {
label = "red:tv";
gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
};
converter_green {
label = "green:converter";
gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
};
converter_red {
label = "red:converter";
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
};
};
};
/* nand_pins are used for leds_pins, empty the node
* from ipq8064.dtsi
*/
&nand_pins {
/delete-property/ disable;
/delete-property/ pullups;
/delete-property/ hold;
};
&qcom_pinmux {
pinctrl-0 = <&akro_pins>;
pinctrl-names = "default";
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
buttons_pins: buttons_pins {
mux {
pins = "gpio22", "gpio24", "gpio40",
"gpio41";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
leds_pins: leds_pins {
mux {
pins = "gpio14", "gpio15", "gpio35",
"gpio36", "gpio38", "gpio42",
"gpio43", "gpio46", "gpio55",
"gpio56", "gpio57", "gpio58";
function = "gpio";
bias-pull-down;
};
akro2 {
pins = "gpio15", "gpio35", "gpio38",
"gpio42", "gpio43", "gpio46",
"gpio55", "gpio56", "gpio57",
"gpio58";
drive-strength = <2>;
};
akro4 {
pins = "gpio14", "gpio36";
drive-strength = <4>;
};
};
/*
* Stock firmware has the following settings, so let's do the same.
* I don't sure why these are required.
*/
akro_pins: akro_pinmux {
akro {
pins = "gpio17", "gpio26", "gpio47";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
reset {
pins = "gpio45";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
gmac0_rgmii {
pins = "gpio25";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0000000 0x0020000>;
read-only;
};
partition@20000 {
label = "MIBIB";
reg = <0x0020000 0x0020000>;
read-only;
};
partition@40000 {
label = "SBL2";
reg = <0x0040000 0x0040000>;
read-only;
};
partition@80000 {
label = "SBL3";
reg = <0x0080000 0x0080000>;
read-only;
};
partition@100000 {
label = "DDRCONFIG";
reg = <0x0100000 0x0010000>;
read-only;
};
partition@110000 {
label = "SSD";
reg = <0x0110000 0x0010000>;
read-only;
};
partition@120000 {
label = "TZ";
reg = <0x0120000 0x0080000>;
read-only;
};
partition@1a0000 {
label = "RPM";
reg = <0x01a0000 0x0080000>;
read-only;
};
partition@220000 {
label = "APPSBL";
reg = <0x0220000 0x0080000>;
read-only;
};
partition@2a0000 {
label = "APPSBLENV";
reg = <0x02a0000 0x0010000>;
read-only;
};
factory: partition@2b0000 {
label = "PRODUCTDATA";
reg = <0x02b0000 0x0030000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_factory_6: macaddr@6 {
reg = <0x6 0x6>;
};
macaddr_PRODUCTDATA_c: macaddr@c {
reg = <0xc 0x6>;
};
macaddr_PRODUCTDATA_12: macaddr@12 {
reg = <0x12 0x6>;
};
};
};
partition@2e0000 {
label = "ART";
reg = <0x02e0000 0x0040000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
precal_ART_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_ART_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
partition@320000 {
label = "TP";
reg = <0x0320000 0x0040000>;
read-only;
};
partition@360000 {
label = "TINY";
reg = <0x0360000 0x0500000>;
read-only;
};
partition@860000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x0860000 0x17a0000>;
};
};
};
};
};
&adm_dma {
status = "okay";
};
&pcie0 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&pcie1 {
status = "okay";
force_gen1 = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
ieee80211-freq-limit = <2400000 2483000>;
qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port1>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
function-enumerator = <1>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
function-enumerator = <2>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
function-enumerator = <3>;
default-state = "keep";
};
};
};
port@2 {
reg = <2>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port2>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
default-state = "keep";
};
};
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
default-state = "keep";
};
};
};
port@4 {
reg = <4>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port4>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
default-state = "keep";
};
};
};
port@5 {
reg = <5>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port5>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
default-state = "keep";
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
default-state = "keep";
};
};
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
qca,sgmii-rxclk-falling-edge;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
phy-mode = "rgmii";
qcom,id = <1>;
mdiobus = <&mdio0>;
nvmem-cells = <&macaddr_factory_0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mdiobus = <&mdio0>;
nvmem-cells = <&macaddr_factory_6>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};

487
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi
View File

@ -1,487 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
/ {
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
ramoops@42100000 {
compatible = "ramoops";
reg = <0x42100000 0x40000>;
record-size = <0x4000>;
console-size = <0x4000>;
ftrace-size = <0x4000>;
pmsg-size = <0x4000>;
};
};
aliases {
mdio-gpio0 = &mdio0;
label-mac-device = &gmac2;
};
};
&qcom_pinmux {
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
usb0_pwr_en_pin: usb0_pwr_en_pin {
mux {
pins = "gpio25";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
output-high;
};
};
usb1_pwr_en_pin: usb1_pwr_en_pin {
mux {
pins = "gpio23";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
output-high;
};
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
partition@40000 {
label = "SBL2";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "SBL3";
reg = <0x60000 0x30000>;
read-only;
};
partition@90000 {
label = "DDRCONFIG";
reg = <0x90000 0x10000>;
read-only;
};
partition@a0000 {
label = "SSD";
reg = <0xa0000 0x10000>;
read-only;
};
partition@b0000 {
label = "TZ";
reg = <0xb0000 0x30000>;
read-only;
};
partition@e0000 {
label = "RPM";
reg = <0xe0000 0x20000>;
read-only;
};
partition@100000 {
label = "fs-uboot";
reg = <0x100000 0x70000>;
read-only;
};
partition@170000 {
label = "uboot-env";
reg = <0x170000 0x40000>;
read-only;
};
partition@1b0000 {
label = "radio";
reg = <0x1b0000 0x40000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
precal_radio_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_radio_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
partition@1f0000 {
label = "os-image";
reg = <0x1f0000 0x400000>;
};
partition@5f0000 {
label = "rootfs";
reg = <0x5f0000 0x1900000>;
};
defaultmac: partition@1ef0000 {
label = "default-mac";
reg = <0x1ef0000 0x00200>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_defaultmac_8: macaddr@8 {
compatible = "mac-base";
reg = <0x8 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@1ef0200 {
label = "pin";
reg = <0x1ef0200 0x00200>;
read-only;
};
partition@1ef0400 {
label = "product-info";
reg = <0x1ef0400 0x0fc00>;
read-only;
};
partition@1f00000 {
label = "partition-table";
reg = <0x1f00000 0x10000>;
read-only;
};
partition@1f10000 {
label = "soft-version";
reg = <0x1f10000 0x10000>;
read-only;
};
partition@1f20000 {
label = "support-list";
reg = <0x1f20000 0x10000>;
read-only;
};
partition@1f30000 {
label = "profile";
reg = <0x1f30000 0x10000>;
read-only;
};
partition@1f40000 {
label = "default-config";
reg = <0x1f40000 0x10000>;
read-only;
};
partition@1f50000 {
label = "user-config";
reg = <0x1f50000 0x40000>;
read-only;
};
partition@1f90000 {
label = "qos-db";
reg = <0x1f90000 0x40000>;
read-only;
};
partition@1fd0000 {
label = "usb-config";
reg = <0x1fd0000 0x10000>;
read-only;
};
partition@1fe0000 {
label = "log";
reg = <0x1fe0000 0x20000>;
read-only;
};
};
};
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pin>;
pinctrl-names = "default";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pin>;
pinctrl-names = "default";
};
&pcie0 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_defaultmac_8 (-1)>, <&precal_radio_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_defaultmac_8 0>, <&precal_radio_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_defaultmac_8 1>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_defaultmac_8 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&adm_dma {
status = "okay";
};

168
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts
View File

@ -1,168 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/leds/common.h>
#include "qcom-ipq8064-ad7200-c2600.dtsi"
/ {
model = "TP-Link Talon AD7200";
compatible = "tplink,ad7200", "qcom,ipq8064";
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
led_enable {
label = "led-enable";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
};
usb1 {
label = "blue:usb1";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "blue:wlan5g";
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "blue:usb3";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "blue:wlan2g";
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
};
wan_orange {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
wan_blue {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
};
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
};
wlan60g {
label = "blue:wlan60g";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
led_status: status {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio53", "gpio54", "gpio67";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
"gpio33", "gpio55", "gpio56", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&mdio0 {
switch@10 {
ports {
port@1 {
label = "wan";
};
port@2 {
label = "lan1";
};
port@3 {
label = "lan2";
};
port@4 {
label = "lan3";
};
port@5 {
label = "lan4";
};
};
};
};
&pcie2 {
status = "okay";
max-link-speed = <1>;
};

219
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
View File

@ -1,219 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
mdio-gpio0 = &mdio0;
};
};
&adm_dma {
status = "okay";
};
&flash {
partitions {
compatible = "qcom,smem-part";
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "qcom,smem-part";
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
/*
port@6 {
reg = <0>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
asym-pause;
};
};
*/
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};

254
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
View File

@ -1,254 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/AP161";
compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
mdio-gpio0 = &mdio0;
};
};
&qcom_pinmux {
rgmii2_pins: rgmii2-pins {
mux {
pins = "gpio27", "gpio28", "gpio29",
"gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59",
"gpio60", "gpio61", "gpio62",
"gpio2", "gpio66";
};
};
};
&flash {
partitions {
compatible = "qcom,smem-part";
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
};
&pcie2 {
status = "okay";
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "qcom,smem-part";
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
/*
port@6 {
reg = <0>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
asym-pause;
};
};
*/
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
phy3: ethernet-phy@3 {
device_type = "ethernet-phy";
reg = <3>;
};
};
&gmac0 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&adm_dma {
status = "okay";
};

92
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-asus-onhub.dts
View File

@ -1,92 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2014 The ChromiumOS Authors
*/
#include "qcom-ipq8064-onhub.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
model = "ASUS OnHub";
compatible = "asus,onhub", "google,arkham", "qcom,ipq8064";
};
&qcom_pinmux {
ap3223_pins: ap3223_pinmux {
pins = "gpio22";
function = "gpio";
bias-none;
};
i2c7_pins: i2c7_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "gsbi7";
};
data {
pins = "gpio8";
bias-disable;
};
clk {
pins = "gpio9";
bias-disable;
};
};
};
&gsbi7 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi7_i2c {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c7_pins>;
pinctrl-names = "default";
ap3223@1c {
compatible = "dynaimage,ap3223";
reg = <0x1c>;
pinctrl-0 = <&ap3223_pins>;
pinctrl-names = "default";
int-gpio = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
};
led-controller@32 {
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = /bits/ 8 <1>;
#address-cells = <1>;
#size-cells = <0>;
led@4 {
reg = <4>;
color = <LED_COLOR_ID_GREEN>;
chan-name = "green:status";
linux,default-trigger = "default-on";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
};
led@5 {
reg = <5>;
color = <LED_COLOR_ID_BLUE>;
chan-name = "blue:status";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
};
led@8 {
reg = <8>;
color = <LED_COLOR_ID_RED>;
chan-name = "red:status";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
};
};
};

126
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
View File

@ -1,126 +0,0 @@
#include <dt-bindings/leds/common.h>
#include "qcom-ipq8064-ad7200-c2600.dtsi"
/ {
model = "TP-Link Archer C2600";
compatible = "tplink,c2600", "qcom,ipq8064";
aliases {
led-boot = &power;
led-failsafe = &general;
led-running = &power;
led-upgrade = &general;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
ledswitch {
label = "ledswitch";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
};
usb4 {
label = "white:usb_4";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "white:usb_2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_amber {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
wan_white {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
};
power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
general: general {
label = "white:general";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
"gpio53", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};

485
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
View File

@ -1,485 +0,0 @@
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Netgear Nighthawk X4 D7800";
compatible = "netgear,d7800", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
rsvd@5fe00000 {
reg = <0x5fe00000 0x200000>;
reusable;
};
};
aliases {
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
power_amber: power_amber {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power_white: power_white {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
&sata_phy {
status = "okay";
};
&sata {
status = "okay";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
&pcie0 {
status = "okay";
reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&pcie1 {
status = "okay";
reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&pcie2 {
status = "okay";
reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie2_pins>;
pinctrl-names = "default";
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
nand-is-boot-medium;
qcom,boot-partitions = <0x0 0x1180000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
compatible = "mac-base";
reg = <0x6 0x6>;
#nvmem-cell-cells = <1>;
};
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
artbak: art@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
kernel@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
ubi@1880000 {
label = "ubi";
reg = <0x1880000 0x6080000>;
};
reserve@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_art_6 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&adm_dma {
status = "okay";
};

263
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-db149.dts
View File

@ -1,263 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/DB149";
compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
aliases {
serial0 = &gsbi2_serial;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
};
&qcom_pinmux {
rgmii0_pins: rgmii0_pins {
mux {
pins = "gpio2", "gpio66";
drive-strength = <8>;
bias-disable;
};
};
};
&gsbi2 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
gsbi2_serial: serial@12490000 {
status = "okay";
};
};
&gsbi4 {
status = "disabled";
};
&gsbi4_serial {
status = "disabled";
};
&flash {
m25p,fast-read;
partition@0 {
label = "lowlevel_init";
reg = <0x0 0x1b0000>;
};
partition@1 {
label = "u-boot";
reg = <0x1b0000 0x80000>;
};
partition@2 {
label = "u-boot-env";
reg = <0x230000 0x40000>;
};
partition@3 {
label = "caldata";
reg = <0x270000 0x40000>;
};
partition@4 {
label = "firmware";
reg = <0x2b0000 0x1d50000>;
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&pcie2 {
status = "okay";
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
/*
port@6 {
reg = <0>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
asym-pause;
};
};
*/
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
phy6: ethernet-phy@6 {
reg = <6>;
};
phy7: ethernet-phy@7 {
reg = <7>;
};
};
&gmac0 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
pinctrl-0 = <&rgmii0_pins>;
pinctrl-names = "default";
};
&gmac1 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
phy-handle = <&phy6>;
};
&gmac3 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <3>;
phy-handle = <&phy7>;
};

120
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
View File

@ -1,120 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/leds/common.h>
#include "qcom-ipq8064-eax500.dtsi"
/ {
model = "Linksys EA7500 V1 WiFi Router";
compatible = "linksys,ea7500-v1", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0xe000000>;
device_type = "memory";
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
/* look for root deviceblock nbr in this bootarg */
find-rootblock = "ubi.mtd=";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio65", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio6";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&partitions {
partition@5f80000 {
label = "sysdiag";
reg = <0x5f80000 0x100000>;
};
partition@6080000 {
label = "syscfg";
reg = <0x6080000 0x1f80000>;
};
};
&mdio0 {
switch@10 {
ports {
port@1 {
label = "wan";
};
port@2 {
label = "lan1";
};
port@3 {
label = "lan2";
};
port@4 {
label = "lan3";
};
port@5 {
label = "lan4";
};
};
};
};

126
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
View File

@ -1,126 +0,0 @@
#include <dt-bindings/leds/common.h>
#include "qcom-ipq8064-eax500.dtsi"
/ {
model = "Linksys EA8500 WiFi Router";
compatible = "linksys,ea8500", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
aliases {
mdio-gpio0 = &mdio0;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wifi {
label = "green:wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio53", "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&sata_phy {
status = "okay";
};
&sata {
status = "okay";
};
&partitions {
partition@5f80000 {
label = "syscfg";
reg = <0x5f80000 0x2080000>;
};
};
&gmac1 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
};
/* LAN */
&gmac2 {
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
};

317
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
View File

@ -1,317 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
/ {
chosen {
bootargs = "console=ttyMSM0,115200n8";
/* append to bootargs adding the root deviceblock nbr from bootloader */
append-rootblock = "ubi.mtd=";
};
};
&qcom_pinmux {
/* eax500 routers reuse the pcie2 reset pin for switch reset pin */
switch_reset: switch_reset_pins {
mux {
pins = "gpio63";
function = "gpio";
drive-strength = <12>;
bias-pull-up;
};
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
max-link-speed = <1>;
};
&pcie1 {
status = "okay";
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
nand-is-boot-medium;
qcom,boot-partitions = <0x0 0x0c80000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
partition@180000 {
label = "SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
partition@2c0000 {
label = "SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
partition@540000 {
label = "DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
partition@660000 {
label = "SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
partition@780000 {
label = "TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
partition@a00000 {
label = "RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
art: partition@c80000 {
label = "art";
reg = <0x0c80000 0x0140000>;
read-only;
};
partition@dc0000 {
label = "APPSBL";
reg = <0x0dc0000 0x0100000>;
read-only;
};
partition@ec0000 {
label = "u_env";
reg = <0x0ec0000 0x0040000>;
};
partition@f00000 {
label = "s_env";
reg = <0x0f00000 0x0040000>;
};
partition@f40000 {
label = "devinfo";
reg = <0x0f40000 0x0040000>;
};
partition@f80000 {
label = "kernel1";
reg = <0x0f80000 0x2800000>; /* 4 MB, spill to rootfs */
};
partition@1380000 {
label = "rootfs1";
reg = <0x1380000 0x2400000>;
};
partition@3780000 {
label = "kernel2";
reg = <0x3780000 0x2800000>;
};
partition@3b80000 {
label = "rootfs2";
reg = <0x3b80000 0x2400000>;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
/* Switch from documentation require at least 10ms for reset */
reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
reset-post-delay-us = <12000>;
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&adm_dma {
status = "okay";
};

413
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts
View File

@ -1,413 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Fortinet FAP-421E";
compatible = "fortinet,fap-421e", "qcom,ipq8064";
memory@42000000 {
device_type = "memory";
reg = <0x42000000 0xe000000>;
};
reserved-memory {
rsvd@41200000 {
no-map;
reg = <0x41200000 0x300000>;
};
wifi_dump@44000000 {
no-map;
reg = <0x44000000 0x600000>;
};
};
aliases {
led-boot = &led_power_yellow;
led-failsafe = &led_power_yellow;
led-running = &led_power_yellow;
led-upgrade = &led_power_yellow;
label-mac-device = &gmac0;
};
chosen {
bootargs-override = "console=ttyMSM0,9600n8";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
eth1-amber {
label = "amber:eth1";
gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>;
};
eth1-yellow {
label = "yellow:eth1";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
eth2-amber {
label = "amber:eth2";
gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>;
};
eth2-yellow {
label = "yellow:eth2";
gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
};
power-amber {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
};
led_power_yellow: power-yellow {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_YELLOW>;
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
};
2g-yellow {
label = "yellow:2g";
gpios = <&qcom_pinmux 30 GPIO_ACTIVE_LOW>;
};
5g-yellow {
label = "yellow:5g";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
bias-pull-up;
drive-strength = <2>;
pins = "gpio56";
};
};
led_pins: led_pins {
mux {
bias-pull-down;
drive-strength = <2>;
function = "gpio";
output-low;
pins = "gpio23";
};
};
rgmii2_pins: rgmii2-pins {
mux {
bias-disable;
drive-strength = <16>;
function = "rgmii2";
pins = "gpio66";
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
uart0_pins: uart0_pins {
mux {
bias-disable;
drive-strength = <12>;
function = "gsbi7";
pins = "gpio6", "gpio7";
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux {
pins = "gpio22";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-low;
};
};
};
&gsbi7 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
};
&gsbi7_serial{
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
status = "okay";
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
m25p,fast-read;
partition@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
partition@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
partition@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
partition@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
partition@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
partition@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
partition@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
partition@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_appsbl_7ff80: mac-address@7ff80 {
compatible = "mac-base";
reg = <0x7ff80 0xc>;
#nvmem-cell-cells = <1>;
};
};
};
partition@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x40000>;
};
partition@2e0000 {
label = "ART";
reg = <0x2e0000 0x40000>;
read-only;
};
partition@320000 {
label = "kernel";
reg = <0x320000 0x600000>;
};
partition@920000 {
label = "ubi";
reg = <0x920000 0x1400000>;
};
partition@1d20000 {
label = "reserved";
reg = <0x1d20000 0x260000>;
read-only;
};
partition@1f80000 {
label = "config";
reg = <0x1f80000 0x80000>;
read-only;
};
};
};
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
&pcie0 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_appsbl_7ff80 8>;
nvmem-cell-names = "mac-address";
};
};
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_appsbl_7ff80 16>;
nvmem-cell-names = "mac-address";
};
};
};
&adm_dma {
status = "okay";
};
&mdio0 {
status = "okay";
#address-cells = <0x1>;
#size-cells = <0x0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy1: ethernet-phy@1 {
reg = <1>;
};
phy2: ethernet-phy@2 {
reg = <2>;
};
};
&gmac0 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_appsbl_7ff80 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_appsbl_7ff80 1>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};

383
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts
View File

@ -1,383 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
compatible = "asrock,g10", "qcom,ipq8064";
model = "ASRock G10";
aliases {
ethernet0 = &gmac1;
ethernet1 = &gmac0;
led-boot = &led_status_blue;
led-failsafe = &led_status_amber;
led-running = &led_status_blue;
led-upgrade = &led_status_amber;
};
chosen {
bootargs-override = "console=ttyMSM0,115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
/*
* this is a bit misleading. Because there are about seven
* multicolor LEDs connected all wired together in parallel.
*/
status_yellow {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_YELLOW>;
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
led_status_amber: status_amber {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
led_status_blue: status_blue {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
/*
* LED is declared in vendors boardfile but it's not
* working and the manual doesn't mention anything
* about the LED being white.
status_white {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
*/
};
i2c-gpio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
<&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
i2c-gpio,delay-us = <5>;
i2c-gpio,scl-output-only;
mcu@50 {
reg = <0x50>;
compatible = "sonix,sn8f25e21";
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
ir-remote {
label = "ir-remote";
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps5g {
label = "wps5g";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
wps2g {
label = "wps2g";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
};
&adm_dma {
status = "okay";
};
&gmac1 {
status = "okay";
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
phy-mode = "rgmii";
qcom,id = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4_serial {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
nand-is-boot-medium;
qcom,boot-partitions = <0x0 0x1200000>;
partitions {
compatible = "qcom,smem-part";
};
};
};
&pcie0 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi5g: wifi@1,0 {
reg = <0x00010000 0 0 0 0>;
compatible = "qcom,ath10k";
qcom,ath10k-calibration-variant = "ASRock-G10";
};
};
};
&pcie1 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2g: wifi@1,0 {
reg = <0x00010000 0 0 0 0>;
compatible = "qcom,ath10k";
qcom,ath10k-calibration-variant = "ASRock-G10";
};
};
};
&qcom_pinmux {
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio26";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
button_pins: button_pins {
mux {
pins = "gpio15", "gpio16", "gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
uart0_pins: uart0_pins {
mux {
pins = "gpio10", "gpio11";
function = "gsbi4";
drive-strength = <10>;
bias-disable;
};
};
};
&rpm {
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&tcsr {
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
};
/delete-node/ &pcie2_pins;
/delete-node/ &pcie2;

545
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi
View File

@ -1,545 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2014 The ChromiumOS Authors
*/
#include "qcom-ipq8064-smb208.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
aliases {
ethernet0 = &gmac0;
ethernet1 = &gmac2;
mdio-gpio0 = &mdio;
serial0 = &gsbi4_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
dev {
label = "dev";
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CONFIG>;
debounce-interval = <60>;
wakeup-source;
};
};
mdio: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
};
};
};
soc {
rng@1a500000 {
status = "disabled";
};
sound {
compatible = "google,storm-audio";
qcom,model = "ipq806x-storm";
cpu = <&lpass>;
codec = <&max98357a>;
};
lpass: lpass@28100000 {
status = "okay";
pinctrl-names = "default", "idle";
pinctrl-0 = <&mi2s_default>;
pinctrl-1 = <&mi2s_idle>;
};
max98357a: max98357a {
compatible = "maxim,max98357a";
#sound-dai-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmode_pins>;
sdmode-gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
rgmii0_pins: rgmii0_pins {
mux {
pins = "gpio2", "gpio66";
drive-strength = <8>;
bias-disable;
};
};
mi2s_pins {
mi2s_default: mi2s_default {
dout {
pins = "gpio32";
function = "mi2s";
drive-strength = <16>;
bias-disable;
};
sync {
pins = "gpio27";
function = "mi2s";
drive-strength = <16>;
bias-disable;
};
clk {
pins = "gpio28";
function = "mi2s";
drive-strength = <16>;
bias-disable;
};
};
mi2s_idle: mi2s_idle {
dout {
pins = "gpio32";
function = "mi2s";
drive-strength = <2>;
bias-pull-down;
};
sync {
pins = "gpio27";
function = "mi2s";
drive-strength = <2>;
bias-pull-down;
};
clk {
pins = "gpio28";
function = "mi2s";
drive-strength = <2>;
bias-pull-down;
};
};
};
mdio_pins: mdio_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
rst {
pins = "gpio26";
output-low;
};
};
sdmode_pins: sdmode_pinmux {
pins = "gpio25";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
sdcc1_pins: sdcc1_pinmux {
mux {
pins = "gpio38", "gpio39", "gpio40",
"gpio41", "gpio42", "gpio43",
"gpio44", "gpio45", "gpio46",
"gpio47";
function = "sdc1";
};
cmd {
pins = "gpio45";
drive-strength = <10>;
bias-pull-up;
};
data {
pins = "gpio38", "gpio39", "gpio40",
"gpio41", "gpio43", "gpio44",
"gpio46", "gpio47";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio42";
drive-strength = <16>;
bias-pull-down;
};
};
i2c1_pins: i2c1_pinmux {
pins = "gpio53", "gpio54";
function = "gsbi1";
bias-disable;
};
rpm_i2c_pinmux: rpm_i2c_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
/delete-property/ bias-none;
/delete-property/ drive-strength;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
fw_pinmux {
wp {
pins = "gpio17";
output-low;
};
};
button_pins: button_pins {
recovery {
pins = "gpio16";
function = "gpio";
bias-none;
};
developer {
pins = "gpio15";
function = "gpio";
bias-none;
};
};
spi6_pins: spi6_pins {
mux {
pins = "gpio55", "gpio56", "gpio58";
function = "gsbi6";
bias-pull-down;
};
data {
pins = "gpio55", "gpio56";
drive-strength = <10>;
};
cs {
pins = "gpio57";
drive-strength = <10>;
bias-pull-up;
output-high;
};
clk {
pins = "gpio58";
drive-strength = <12>;
};
};
};
&adm_dma {
status = "okay";
};
&gmac0 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
pinctrl-0 = <&rgmii0_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi1 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi1_i2c {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
tpm@20 {
compatible = "infineon,slb9645tt";
reg = <0x20>;
powered-while-suspended;
};
};
&gsbi4 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi4_serial {
status = "okay";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi4: spi@1a280000 {
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
};
};
};
&gsbi6 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
};
&gsbi6_spi {
status = "okay";
spi-max-frequency = <25000000>;
pinctrl-0 = <&spi6_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
dmas = <&adm_dma 8 0xb>,
<&adm_dma 7 0x14>;
dma-names = "rx", "tx";
/*
* This "spidev" was included in the manufacturer device tree. I suspect
* it's the (unused) Zigbee radio -- SiliconLabs EM3581 Zigbee? There's
* no driver or binding for this at the moment.
*/
spidev@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <25000000>;
};
};
&pcie0 {
status = "okay";
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupt-controller;
ath10k@0,0 {
reg = <0 0 0 0 0>;
device_type = "pci";
qcom,ath10k-sa-gpio = <2 3 4 0>;
qcom,ath10k-sa-gpio-func = <5 5 5 0>;
};
};
};
&pcie1 {
status = "okay";
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupt-controller;
ath10k@0,0 {
reg = <0 0 0 0 0>;
device_type = "pci";
qcom,ath10k-sa-gpio = <2 3 4 0>;
qcom,ath10k-sa-gpio-func = <5 5 5 0>;
};
};
};
&pcie2 {
status = "okay";
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupt-controller;
ath10k@0,0 {
reg = <0 0 0 0 0>;
device_type = "pci";
};
};
};
&rpm {
pinctrl-0 = <&rpm_i2c_pinmux>;
pinctrl-names = "default";
};
&sdcc1 {
status = "okay";
pinctrl-0 = <&sdcc1_pins>;
pinctrl-names = "default";
/delete-property/ mmc-ddr-1_8v;
};
&tcsr {
compatible = "qcom,tcsr-ipq8064", "qcom,tcsr", "syscon";
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};

415
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
View File

@ -1,415 +0,0 @@
#include "qcom-ipq8064-v1.0.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Netgear Nighthawk X4 R7500";
compatible = "netgear,r7500", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0xe000000>;
device_type = "memory";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
aliases {
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
power_amber: power_amber {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power_white: power_white {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&gsbi5 {
status = "disabled";
spi@1a280000 {
status = "disabled";
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
nand-is-boot-medium;
qcom,boot-partitions = <0x0 0x1180000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
};
};
kernel@1340000 {
label = "kernel";
reg = <0x1340000 0x0400000>;
};
ubi@1740000 {
label = "ubi";
reg = <0x1740000 0x1600000>;
};
netgear@2d40000 {
label = "netgear";
reg = <0x2d40000 0x0c00000>;
read-only;
};
reserve@3940000 {
label = "reserve";
reg = <0x3940000 0x46c0000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_art_6>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&tcsr {
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
compatible = "qcom,tcsr";
};
&adm_dma {
status = "okay";
};

477
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
View File

@ -1,477 +0,0 @@
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Netgear Nighthawk X4 R7500v2";
compatible = "netgear,r7500v2", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
rsvd@5fe00000 {
reg = <0x5fe00000 0x200000>;
reusable;
};
};
aliases {
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb1 {
label = "amber:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "amber:usb3";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
status {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet {
label = "white:internet";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
esata {
label = "white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};
};
&adm_dma {
status = "okay";
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
&sata_phy {
status = "okay";
};
&sata {
status = "okay";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
&pcie0 {
status = "okay";
reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&pcie1 {
status = "okay";
reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
nand-is-boot-medium;
qcom,boot-partitions = <0x0 0x1180000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
qcadata@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
APPSBL@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
APPSBLENV@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
compatible = "mac-base";
reg = <0x6 0x6>;
#nvmem-cell-cells = <1>;
};
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
artbak: art@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
kernel@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
ubi@1880000 {
label = "ubi";
reg = <0x1880000 0x6080000>;
};
reserve@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_art_6 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};

209
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-tplink-onhub.dts
View File

@ -1,209 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2014 The ChromiumOS Authors
*/
#include "qcom-ipq8064-onhub.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
model = "TP-Link OnHub";
compatible = "tplink,onhub", "google,whirlwind-sp5", "qcom,ipq8064";
};
&qcom_pinmux {
i2c7_pins: i2c7_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "gsbi7";
};
data {
pins = "gpio8";
bias-disable;
};
clk {
pins = "gpio9";
bias-disable;
};
};
};
&gsbi7 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi7_i2c {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c7_pins>;
pinctrl-names = "default";
led-controller@32 {
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = /bits/ 8 <1>;
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_RED>;
chan-name = "red:status-0";
linux,default-trigger = "default-on";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
chan-name = "green:status-0";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_BLUE>;
chan-name = "blue:status-0";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_RED>;
chan-name = "red:status-1";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@4 {
reg = <4>;
color = <LED_COLOR_ID_GREEN>;
chan-name = "green:status-1";
linux,default-trigger = "default-on";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@5 {
reg = <5>;
color = <LED_COLOR_ID_BLUE>;
chan-name = "blue:status-1";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@6 {
reg = <6>;
color = <LED_COLOR_ID_RED>;
chan-name = "red:status-2";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@7 {
reg = <7>;
color = <LED_COLOR_ID_GREEN>;
chan-name = "green:status-2";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@8 {
reg = <8>;
color = <LED_COLOR_ID_BLUE>;
chan-name = "blue:status-2";
linux,default-trigger = "default-on";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
};
led-controller@33 {
compatible = "national,lp5523";
reg = <0x33>;
clock-mode = /bits/ 8 <1>;
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_RED>;
chan-name = "red:status-3";
linux,default-trigger = "default-on";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
chan-name = "green:status-3";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_BLUE>;
chan-name = "blue:status-3";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_RED>;
chan-name = "red:status-4";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@4 {
reg = <4>;
color = <LED_COLOR_ID_GREEN>;
chan-name = "green:status-4";
linux,default-trigger = "default-on";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@5 {
reg = <5>;
color = <LED_COLOR_ID_BLUE>;
chan-name = "blue:status-4";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@6 {
reg = <6>;
color = <LED_COLOR_ID_RED>;
chan-name = "red:status-5";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@7 {
reg = <7>;
color = <LED_COLOR_ID_GREEN>;
chan-name = "green:status-5";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
led@8 {
reg = <8>;
color = <LED_COLOR_ID_BLUE>;
chan-name = "blue:status-5";
linux,default-trigger = "default-on";
led-cur = /bits/ 8 <0x64>;
max-cur = /bits/ 8 <0x78>;
};
};
};

315
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
View File

@ -1,315 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Ubiquiti UniFi AC HD";
compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064";
aliases {
label-mac-device = &gmac2;
led-boot = &led_dome_white;
led-failsafe = &led_dome_white;
led-running = &led_dome_blue;
led-upgrade = &led_dome_blue;
mdio-gpio0 = &mdio0;
ethernet0 = &gmac2;
ethernet1 = &gmac1;
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_dome_blue: dome_blue {
label = "blue:dome";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
led_dome_white: dome_white {
label = "white:dome";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio9", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-low;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
};
&CPU_SPC {
status = "disabled";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash@0 {
compatible = "mx25u25635f", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "MIBIB";
reg = <0x20000 0x10000>;
read-only;
};
partition@30000 {
label = "SBL2";
reg = <0x30000 0x20000>;
read-only;
};
partition@50000 {
label = "SBL3";
reg = <0x50000 0x30000>;
read-only;
};
partition@80000 {
label = "DDRCONFIG";
reg = <0x80000 0x10000>;
read-only;
};
partition@90000 {
label = "SSD";
reg = <0x90000 0x10000>;
read-only;
};
partition@a0000 {
label = "TZ";
reg = <0xa0000 0x30000>;
read-only;
};
partition@d0000 {
label = "RPM";
reg = <0xd0000 0x20000>;
read-only;
};
partition@f0000 {
label = "APPSBL";
reg = <0xf0000 0xc0000>;
read-only;
};
partition@1b0000 {
label = "APPSBLENV";
reg = <0x1b0000 0x10000>;
read-only;
};
eeprom: partition@1c0000 {
label = "EEPROM";
reg = <0x1c0000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_eeprom_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_eeprom_6: macaddr@6 {
reg = <0x6 0x6>;
};
};
};
partition@1d0000 {
label = "bootselect";
reg = <0x1d0000 0x10000>;
};
partition@1e0000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x1e0000 0xe70000>;
};
partition@1050000 {
label = "kernel1";
reg = <0x1050000 0xe70000>;
read-only;
};
partition@1ec0000 {
label = "debug";
reg = <0x1ec0000 0x100000>;
read-only;
};
partition@1fc0000 {
label = "cfg";
reg = <0x1fc0000 0x40000>;
read-only;
};
};
};
};
};
&adm_dma {
status = "okay";
};
&nand {
status = "okay";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy4: ethernet-phy@4 {
reg = <4>;
};
phy5: ethernet-phy@5 {
reg = <5>;
};
};
&gmac1 {
status = "okay";
mdiobus = <&mdio0>;
phy-handle = <&phy5>;
phy-mode = "sgmii";
qcom,id = <1>;
nvmem-cells = <&macaddr_eeprom_6>;
nvmem-cell-names = "mac-address";
};
&gmac2 {
status = "okay";
mdiobus = <&mdio0>;
phy-handle = <&phy4>;
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_eeprom_0>;
nvmem-cell-names = "mac-address";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&tcsr {
status = "okay";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};

515
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
View File

@ -1,515 +0,0 @@
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "TP-Link Archer VR2600v";
compatible = "tplink,vr2600v", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
aliases {
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &general;
led-running = &power;
led-upgrade = &general;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
dect {
label = "dect";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
debounce-interval = <60>;
wakeup-source;
};
ledswitch {
label = "ledswitch";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
dsl {
label = "white:dsl";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "white:wlan2g";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "white:wlan5g";
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
};
power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
phone {
label = "white:phone";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
wan {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
general: general {
label = "white:general";
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
"gpio26", "gpio53", "gpio56", "gpio66";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
button_pins: button_pins {
mux {
pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
partition@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
partition@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
partition@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
partition@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
partition@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
partition@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
partition@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
};
partition@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x40000>;
read-only;
};
partition@2e0000 {
label = "OLDART";
reg = <0x2e0000 0x40000>;
read-only;
};
partition@320000 {
label = "firmware";
reg = <0x320000 0xc60000>;
compatible = "openwrt,uimage";
openwrt,offset = <512>; /* account for pad-extra 512 */
};
/* hole 0xf80000 - 0xfaf100 */
partition@faf100 {
label = "default-mac";
reg = <0xfaf100 0x00200>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_defaultmac_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@fc0000 {
label = "ART";
reg = <0xfc0000 0x40000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
precal_ART_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_ART_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
};
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_defaultmac_0 (-1)>, <&precal_ART_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_defaultmac_0 0>, <&precal_ART_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_defaultmac_0 1>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_defaultmac_0 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&adm_dma {
status = "okay";
};

552
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
View File

@ -1,552 +0,0 @@
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "NEC Aterm WG2600HP";
compatible = "nec,wg2600hp", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
aliases {
mdio-gpio0 = &mdio0;
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_green;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wps {
label = "wps";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
bridge {
label = "bridge";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
wakeup-source;
};
converter {
label = "converter";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
converter_green {
label = "green:converter";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
};
power_red: power_red {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
active_green {
label = "green:active";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
active_red {
label = "red:active";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
power_green: power_green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
};
converter_red {
label = "red:converter";
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
};
wlan2g_green {
label = "green:wlan2g";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
};
wlan2g_red {
label = "red:wlan2g";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
wlan5g_green {
label = "green:wlan5g";
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
};
wlan5g_red {
label = "red:wlan5g";
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
};
tv_green {
label = "green:tv";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
tv_red {
label = "red:tv";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
};
};
};
&CPU_SPC {
status = "disabled";
};
&adm_dma {
status = "okay";
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
qca,sgmii-rxclk-falling-edge;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_PRODUCTDATA_6>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_PRODUCTDATA_0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
SBL3@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
DDRCONFIG@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
SSD@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
TZ@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
RPM@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
APPSBL@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
};
APPSBLENV@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x10000>;
};
PRODUCTDATA: PRODUCTDATA@2b0000 {
label = "PRODUCTDATA";
reg = <0x2b0000 0x30000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_PRODUCTDATA_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_PRODUCTDATA_6: macaddr@6 {
reg = <0x6 0x6>;
};
macaddr_PRODUCTDATA_c: macaddr@c {
reg = <0xc 0x6>;
};
macaddr_PRODUCTDATA_12: macaddr@12 {
reg = <0x12 0x6>;
};
};
};
ART@2e0000 {
label = "ART";
reg = <0x2e0000 0x40000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
precal_ART_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_ART_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
TP@320000 {
label = "TP";
reg = <0x320000 0x40000>;
read-only;
};
TINY@360000 {
label = "TINY";
reg = <0x360000 0x500000>;
read-only;
};
firmware@860000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x860000 0x17a0000>;
};
};
};
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio24", "gpio25";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
"gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
"gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux {
pins = "gpio22";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-high;
};
};
};

557
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
View File

@ -1,557 +0,0 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
* Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
* All rights reserved.
*/
#include "qcom-ipq8064-v1.0.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
compatible = "compex,wpq864", "qcom,ipq8064";
model = "Compex WPQ864";
aliases {
mdio-gpio0 = &mdio0;
ethernet0 = &gmac1;
ethernet1 = &gmac0;
led-boot = &led_pass;
led-failsafe = &led_fail;
led-running = &led_pass;
led-upgrade = &led_pass;
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
rss4 {
label = "green:rss4";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
rss3 {
label = "green:rss3";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rss2 {
label = "orange:rss2";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
};
rss1 {
label = "red:rss1";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
led_pass: pass {
label = "green:pass";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
led_fail: fail {
label = "green:fail";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
usb {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb-pcie {
label = "green:usb-pcie";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
};
beeper {
compatible = "gpio-beeper";
pinctrl-0 = <&beeper_pins>;
pinctrl-names = "default";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
};
};
&rpm {
pinctrl-0 = <&rpm_pins>;
pinctrl-names = "default";
};
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
mt29f2g08abbeah4@0 {
compatible = "qcom,nandcs";
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
nand-is-boot-medium;
qcom,boot-partitions = <0x0 0x1180000 0x5340000 0x10c0000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
partition@180000 {
label = "0:SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
partition@2c0000 {
label = "0:SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
partition@540000 {
label = "0:DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
partition@660000 {
label = "0:SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
partition@780000 {
label = "0:TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
partition@a00000 {
label = "0:RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
partition@c80000 {
label = "0:APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
partition@1180000 {
label = "0:APPSBLENV";
reg = <0x1180000 0x0080000>;
};
partition@1200000 {
label = "0:ART";
reg = <0x1200000 0x0140000>;
};
partition@1340000 {
label = "ubi";
reg = <0x1340000 0x4000000>;
};
partition@5340000 {
label = "0:BOOTCONFIG";
reg = <0x5340000 0x0060000>;
};
partition@53a0000 {
label = "0:SBL2_1";
reg = <0x53a0000 0x0140000>;
read-only;
};
partition@54e0000 {
label = "0:SBL3_1";
reg = <0x54e0000 0x0280000>;
read-only;
};
partition@5760000 {
label = "0:DDRCONFIG_1";
reg = <0x5760000 0x0120000>;
read-only;
};
partition@5880000 {
label = "0:SSD_1";
reg = <0x5880000 0x0120000>;
read-only;
};
partition@59a0000 {
label = "0:TZ_1";
reg = <0x59a0000 0x0280000>;
read-only;
};
partition@5c20000 {
label = "0:RPM_1";
reg = <0x5c20000 0x0280000>;
read-only;
};
partition@5ea0000 {
label = "0:BOOTCONFIG1";
reg = <0x5ea0000 0x0060000>;
};
partition@5f00000 {
label = "0:APPSBL_1";
reg = <0x5f00000 0x0500000>;
read-only;
};
partition@6400000 {
label = "ubi_1";
reg = <0x6400000 0x4000000>;
};
partition@a400000 {
label = "unused";
reg = <0xa400000 0x5c00000>;
};
};
};
};
&adm_dma {
status = "okay";
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
phy-mode = "rgmii";
qcom,id = <1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4_serial {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&flash {
compatible = "jedec,spi-nor";
};
&sata_phy {
status = "disabled";
};
&sata {
status = "disabled";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <160>;
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
rx_eq = <2>;
tx_deamp_3_5db = <32>;
mpll = <160>;
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
};
&pcie1 {
status = "okay";
};
&pcie2 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
};
&qcom_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinctrl0 {
pcie0_pcie2_perst {
pins = "gpio3";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22",
"gpio23", "gpio24", "gpio25", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
button_pins: button_pins {
mux {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
beeper_pins: beeper_pins {
mux {
pins = "gpio55";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
rpm_pins: rpm_pins {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <10>;
bias-disable;
};
};
uart0_pins: uart0_pins {
mux {
pins = "gpio10", "gpio11";
function = "gsbi4";
drive-strength = <10>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19";
function = "gsbi5";
drive-strength = <10>;
bias-pull-down;
};
clk {
pins = "gpio21";
function = "gsbi5";
drive-strength = <12>;
bias-pull-down;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
};
};
&tcsr {
qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
};

622
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
View File

@ -1,622 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Buffalo WXR-2533DHP";
compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
memory@42000000 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
aliases {
led-boot = &power;
led-failsafe = &diag;
led-running = &power;
led-upgrade = &power;
};
chosen {
/* use "ubi_rootfs" volume in "ubi" partition as rootfs */
bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
usb {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port0 &hub_port1>;
};
guestport {
label = "green:guestport";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
diag: diag {
label = "orange:diag";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet_orange {
label = "orange:internet";
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
internet_white {
label = "white:internet";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wireless_orange {
label = "orange:wireless";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wireless_white {
label = "white:wireless";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
router_orange {
label = "orange:router";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
};
router_white {
label = "white:router";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
power {
label = "power";
gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
eject {
label = "eject";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_EJECTCD>;
debounce-interval = <60>;
wakeup-source;
};
guest {
label = "guest";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
debounce-interval = <60>;
wakeup-source;
};
ap {
label = "ap";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
wakeup-source;
};
router {
label = "router";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
wakeup-source;
};
auto {
label = "auto";
gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
wakeup-source;
};
};
};
&nand {
status = "okay";
cs@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ubi@0 {
label = "ubi";
reg = <0x0000000 0x4000000>;
};
rootfs_1@4000000 {
label = "rootfs_1";
reg = <0x4000000 0x4000000>;
};
};
};
};
&adm_dma {
status = "okay";
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_ART_6>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
nvmem-cells = <&macaddr_ART_0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4_serial {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x10000>;
read-only;
};
MIBIB@10000 {
label = "MIBIB";
reg = <0x10000 0x20000>;
read-only;
};
SBL2@30000 {
label = "SBL2";
reg = <0x30000 0x30000>;
read-only;
};
SBL3@60000 {
label = "SBL3";
reg = <0x60000 0x30000>;
read-only;
};
DDRCONFIG@90000 {
label = "DDRCONFIG";
reg = <0x90000 0x10000>;
read-only;
};
SSD@a0000 {
label = "SSD";
reg = <0xa0000 0x10000>;
read-only;
};
TZ@b0000 {
label = "TZ";
reg = <0xb0000 0x30000>;
read-only;
};
RPM@e0000 {
label = "RPM";
reg = <0xe0000 0x20000>;
read-only;
};
APPSBL@100000 {
label = "APPSBL";
reg = <0x100000 0x70000>;
read-only;
};
APPSBLENV@170000 {
label = "APPSBLENV";
reg = <0x170000 0x10000>;
read-only;
};
ART@180000 {
label = "ART";
reg = <0x180000 0x40000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_ART_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_ART_6: macaddr@6 {
reg = <0x6 0x6>;
};
macaddr_ART_18: macaddr@18 {
reg = <0x18 0x6>;
};
macaddr_ART_1e: macaddr@1e {
reg = <0x1e 0x6>;
};
precal_ART_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_ART_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
BOOTCONFIG@1c0000 {
label = "BOOTCONFIG";
reg = <0x1c0000 0x10000>;
read-only;
};
APPSBL_1@1d0000 {
label = "APPSBL_1";
reg = <0x1d0000 0x70000>;
read-only;
};
};
};
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&dwc3_0 {
#address-cells = <1>;
#size-cells = <0>;
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&dwc3_1 {
#address-cells = <1>;
#size-cells = <0>;
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_ART_1e>, <&precal_ART_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&macaddr_ART_18>, <&precal_ART_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
"gpio58", "gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
"gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
uart0_pins: uart0_pins {
mux {
pins = "gpio10", "gpio11";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs{
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux{
pins = "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-high;
};
};
};

318
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-ac400i.dts
View File

@ -1,318 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Nokia AC400i";
compatible = "nokia,ac400i", "qcom,ipq8065", "qcom,ipq8064";
aliases {
mdio-gpio0 = &mdio0;
ethernet0 = &gmac0;
ethernet1 = &gmac1;
led-boot = &pwr_red;
led-failsafe = &pwr_red;
led-running = &pwr_green;
led-upgrade = &pwr_green;
};
chosen {
bootargs-override = " console=ttyMSM0,115200n8 ubi.mtd=ubi root=/dev/ubiblock0_2";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
5g_red {
label = "red:5g";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
};
5g_green {
label = "green:5g";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
2g_red {
label = "red:2g";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
2g_green {
label = "green:2g";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
};
eth1_red {
label = "red:eth1";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_HIGH>;
};
eth1_green {
label = "green:eth1";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
};
eth2_red {
label = "red:eth2";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
};
eth2_green {
label = "green:eth2";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
};
ctrl_red {
label = "red:ctrl";
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
};
ctrl_green {
label = "green:ctrl";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
};
pwr_red: pwr_red {
label = "red:pwr";
gpios = <&qcom_pinmux 2 GPIO_ACTIVE_LOW>;
};
pwr_green: pwr_green {
label = "green:pwr";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19";
function = "gsbi5";
drive-strength = <10>;
bias-pull-down;
};
clk {
pins = "gpio21";
function = "gsbi5";
drive-strength = <12>;
bias-pull-down;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio65", "gpio64",
"gpio53", "gpio54",
"gpio68", "gpio22",
"gpio67", "gpio23",
"gpio55", "gpio56",
"gpio2", "gpio26";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
button_pins: button_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "qcom,smem-part";
};
};
};
};
&usb3_0 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "Nokia-AC400i";
};
};
};
&pcie1 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "Nokia-AC400i";
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
//POE
&gmac0 {
status = "okay";
qcom,id = <0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mdiobus = <&mdio0>;
phy-handle = <&phy0>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
//LAN1
&gmac1 {
status = "okay";
qcom,id = <1>;
mdiobus = <&mdio0>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
rootfs@0 {
label = "rootfs";
reg = <0x0000000 0x4000000>;
};
rootfs_1@4000000 {
label = "rootfs_1";
reg = <0x4000000 0x4000000>;
};
cfg@8000000 {
label = "cfg";
reg = <0x8000000 0x8000000>;
};
};
};
};
&adm_dma {
status = "okay";
};

395
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
View File

@ -1,395 +0,0 @@
#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "ZyXEL NBG6817";
compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
aliases {
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1";
append-rootblock = "root=/dev/mmcblk0p";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
internet {
label = "white:internet";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi2g {
label = "amber:wifi2g";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
};
/* wifi2g amber from the manual is missing */
wifi5g {
label = "amber:wifi5g";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
/* wifi5g amber from the manual is missing */
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio53", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio9", "gpio26", "gpio33", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
mdio0_pins: mdio0-pins {
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2-pins {
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
input-disable;
};
};
spi_pins: spi_pins {
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio16", "gpio17";
function = "gpio";
drive-strength = <12>;
};
pwr {
pins = "gpio17";
bias-pull-down;
output-high;
};
ovc {
pins = "gpio16";
bias-pull-up;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <12>;
};
pwr {
pins = "gpio14";
bias-pull-down;
output-high;
};
ovc {
pins = "gpio15";
bias-pull-up;
};
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <51200000>;
reg = <0>;
partitions {
compatible = "qcom,smem-part";
};
};
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
&pcie0 {
status = "okay";
reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
&pcie1 {
status = "okay";
reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
max-link-speed = <1>;
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <0>;
qcom,rgmii_delay = <1>;
qcom,phy_mii_type = <0>;
qcom,emulation = <0>;
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,phy_mii_type = <1>;
qcom,emulation = <0>;
qcom,irq = <258>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&sdcc1 {
status = "okay";
};
&adm_dma {
status = "okay";
};

541
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi
View File

@ -1,541 +0,0 @@
#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
reserved-memory {
rsvd@5fe00000 {
reg = <0x5fe00000 0x200000>;
reusable;
};
ramoops@42100000 {
compatible = "ramoops";
reg = <0x42100000 0x40000>;
record-size = <0x4000>;
console-size = <0x4000>;
ftrace-size = <0x4000>;
pmsg-size = <0x4000>;
};
};
aliases {
label-mac-device = &gmac2;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
mdio-gpio0 = &mdio0;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds: leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
power_white: power_white {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_amber: power_amber {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_white {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan_amber {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_AMBER>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9",
"gpio22", "gpio23", "gpio24",
"gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
mdio0_pins: mdio0-pins {
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2-pins {
tx {
pins = "gpio27", "gpio28", "gpio29",
"gpio30", "gpio31", "gpio32";
input-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
spi6_pins: spi6_pins {
mux {
pins = "gpio55", "gpio56", "gpio58";
function = "gsbi6";
bias-pull-down;
};
mosi {
pins = "gpio55";
drive-strength = <12>;
};
miso {
pins = "gpio56";
drive-strength = <14>;
};
cs {
pins = "gpio57";
drive-strength = <12>;
bias-pull-up;
};
clk {
pins = "gpio58";
drive-strength = <12>;
};
reset {
pins = "gpio33";
drive-strength = <10>;
bias-pull-down;
output-high;
};
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
mux {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio16", "gpio68";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
};
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
nand-is-boot-medium;
qcom,boot-partitions = <0x0 0x1180000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "qcadata";
reg = <0x0000000 0x0c80000>;
read-only;
};
partition@c80000 {
label = "APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
partition@1180000 {
label = "APPSBLENV";
reg = <0x1180000 0x0080000>;
read-only;
};
art: partition@1200000 {
label = "art";
reg = <0x1200000 0x0140000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
compatible = "mac-base";
reg = <0x6 0x6>;
#nvmem-cell-cells = <1>;
};
macaddr_art_c: macaddr@c {
reg = <0xc 0x6>;
};
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
partition@1340000 {
label = "artbak";
reg = <0x1340000 0x0140000>;
read-only;
};
partition@1480000 {
label = "kernel";
reg = <0x1480000 0x0400000>;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port5>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac2>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <0>;
qcom,rgmii_delay = <1>;
qcom,phy_mii_type = <0>;
qcom,emulation = <0>;
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
nvmem-cells = <&macaddr_art_6 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,phy_mii_type = <1>;
qcom,emulation = <0>;
qcom,irq = <258>;
mdiobus = <&mdio0>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&adm_dma {
status = "okay";
};
&sata_phy {
status = "okay";
};
&sata {
status = "okay";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
&pcie0 {
status = "okay";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@1,0 {
compatible = "pci168c,0046";
reg = <0x00010000 0 0 0 0>;
};
};
};
&pcie1 {
status = "okay";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi1: wifi@1,0 {
compatible = "pci168c,0046";
reg = <0x00010000 0 0 0 0>;
};
};
};

46
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
View File

@ -1,46 +0,0 @@
#include "qcom-ipq8065-nighthawk.dtsi"
/ {
model = "Netgear Nighthawk X4S R7800";
compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
};
&leds {
usb1 {
label = "white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
esata {
label = "white:esata";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
&partitions {
partition@1880000 {
label = "ubi";
reg = <0x1880000 0x6080000>;
};
partition@7900000 {
label = "reserve";
reg = <0x7900000 0x0700000>;
read-only;
};
};
&wifi0 {
nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
&wifi1 {
nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};

601
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
View File

@ -1,601 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Askey RT4230W REV6";
compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x3e000000>;
device_type = "memory";
};
aliases {
led-boot = &ledctrl3;
led-failsafe = &ledctrl1;
led-running = &ledctrl2;
led-upgrade = &ledctrl3;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
ledctrl1: ledctrl1 {
label = "ledctrl1";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
ledctrl2: ledctrl2 {
label = "ledctrl2";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
ledctrl3: ledctrl3 {
label = "ledctrl3";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio54", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio22", "gpio23", "gpio24";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
rgmii2_pins: rgmii2-pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
input-disable;
};
};
spi_pins: spi_pins {
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "everspin,mr25h256";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <40000000>;
reg = <0>;
};
};
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
qcom,boot-partitions = <0x0 0x1180000 0x1340000 0x10c0000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
partition@180000 {
label = "0:SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
partition@2c0000 {
label = "0:SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
partition@540000 {
label = "0:DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
partition@660000 {
label = "0:SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
partition@780000 {
label = "0:TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
partition@a00000 {
label = "0:RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
partition@c80000 {
label = "0:APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
partition@1180000 {
label = "0:APPSBLENV";
reg = <0x1180000 0x0080000>;
};
partition@1200000 {
label = "0:ART";
reg = <0x1200000 0x0140000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_ART_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_ART_6: macaddr@6 {
reg = <0x6 0x6>;
};
precal_ART_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_ART_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
partition@1340000 {
label = "0:BOOTCONFIG";
reg = <0x1340000 0x0060000>;
read-only;
};
partition@13a0000 {
label = "0:SBL2_1";
reg = <0x13a0000 0x0140000>;
read-only;
};
partition@14e0000 {
label = "0:SBL3_1";
reg = <0x14e0000 0x0280000>;
read-only;
};
partition@1760000 {
label = "0:DDRCONFIG_1";
reg = <0x1760000 0x0120000>;
read-only;
};
partition@1880000 {
label = "0:SSD_1";
reg = <0x1880000 0x0120000>;
read-only;
};
partition@19a0000 {
label = "0:TZ_1";
reg = <0x19a0000 0x0280000>;
read-only;
};
partition@1c20000 {
label = "0:RPM_1";
reg = <0x1c20000 0x0280000>;
read-only;
};
partition@1ea0000 {
label = "0:BOOTCONFIG1";
reg = <0x1ea0000 0x0060000>;
read-only;
};
partition@1f00000 {
label = "0:APPSBL_1";
reg = <0x1f00000 0x0500000>;
read-only;
};
partition@2400000 {
label = "ubi";
reg = <0x2400000 0x1a000000>;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "wan";
phy-mode = "internal";
phy-handle = <&phy_port1>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_WAN;
default-state = "keep";
};
};
};
port@2 {
reg = <2>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port2>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
port@3 {
reg = <3>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port3>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
port@4 {
reg = <4>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port4>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
port@5 {
reg = <5>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port5>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
};
};
};
&gmac0 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
nvmem-cells = <&macaddr_ART_0>;
nvmem-cell-names = "mac-address";
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac1 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <1>;
nvmem-cells = <&macaddr_ART_6>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&adm_dma {
status = "okay";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@1,0 {
compatible = "pci168c,0046";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&precal_ART_1000>;
nvmem-cell-names = "pre-calibration";
};
};
};
&pcie1 {
status = "okay";
reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi1: wifi@1,0 {
compatible = "pci168c,0046";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&precal_ART_5000>;
nvmem-cell-names = "pre-calibration";
};
};
};

524
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts
View File

@ -1,524 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qcom-ipq8065-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Arris TR4400 v2";
compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
aliases {
led-boot = &led_status_blue;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_red;
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_status_red: status_red {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
led_status_blue: status_blue {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio6", "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
rgmii2_pins: rgmii2-pins {
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
input-disable;
};
};
spi_pins: spi_pins {
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "everspin,mr25h256";
spi-max-frequency = <40000000>;
reg = <0>;
};
};
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
qcom,boot-partitions = <0x0 0x1180000 0x5340000 0x10c0000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
partition@180000 {
label = "0:SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
partition@2c0000 {
label = "0:SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
partition@540000 {
label = "0:DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
partition@660000 {
label = "0:SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
partition@780000 {
label = "0:TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
partition@a00000 {
label = "0:RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
partition@c80000 {
label = "0:APPSBL";
reg = <0x0c80000 0x0500000>;
read-only;
};
partition@1180000 {
label = "0:APPSBLENV";
reg = <0x1180000 0x0080000>;
};
partition@1200000 {
label = "0:ART";
reg = <0x1200000 0x0140000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
precal_ART_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_ART_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
stock_partition@1340000 {
label = "stock_rootfs";
reg = <0x1340000 0x4000000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "extra";
reg = <0x0 0x4000000>;
};
};
partition@5340000 {
label = "0:BOOTCONFIG";
reg = <0x5340000 0x0060000>;
read-only;
};
partition@53a0000 {
label = "0:SBL2_1";
reg = <0x53a0000 0x0140000>;
read-only;
};
partition@54e0000 {
label = "0:SBL3_1";
reg = <0x54e0000 0x0280000>;
read-only;
};
partition@5760000 {
label = "0:DDRCONFIG_1";
reg = <0x5760000 0x0120000>;
read-only;
};
partition@5880000 {
label = "0:SSD_1";
reg = <0x5880000 0x0120000>;
read-only;
};
partition@59a0000 {
label = "0:TZ_1";
reg = <0x59a0000 0x0280000>;
read-only;
};
partition@5c20000 {
label = "0:RPM_1";
reg = <0x5c20000 0x0280000>;
read-only;
};
partition@5ea0000 {
label = "0:BOOTCONFIG1";
reg = <0x5ea0000 0x0060000>;
read-only;
};
partition@5f00000 {
label = "0:APPSBL_1";
reg = <0x5f00000 0x0500000>;
read-only;
};
stock_partition@6400000 {
label = "stock_rootfs_1";
reg = <0x6400000 0x4000000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "fw_env";
reg = <0x0 0x100000>;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_fw_env_0: macaddr@0 {
reg = <0x00 0x6>;
};
macaddr_fw_env_6: macaddr@6 {
reg = <0x06 0x6>;
};
macaddr_fw_env_c: macaddr@c {
reg = <0x0c 0x6>;
};
macaddr_fw_env_12: macaddr@12 {
reg = <0x12 0x6>;
};
macaddr_fw_env_18: macaddr@18 {
reg = <0x18 0x6>;
};
};
};
partition@100000 {
label = "ubi";
reg = <0x100000 0x9b00000>;
};
};
stock_partition@a400000 {
label = "stock_fw_env";
reg = <0xa400000 0x0100000>;
};
stock_partition@a500000 {
label = "stock_config";
reg = <0xa500000 0x0800000>;
};
stock_partition@ad00000 {
label = "stock_PKI";
reg = <0xad00000 0x0200000>;
};
stock_partition@af00000 {
label = "stock_scfgmgr";
reg = <0xaf00000 0x0100000>;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
tx-internal-delay-ps = <1000>;
rx-internal-delay-ps = <1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&phy_port4>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
};
};
phy7: ethernet-phy@7 {
reg = <7>;
};
};
&gmac0 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
nvmem-cells = <&macaddr_fw_env_18>;
nvmem-cell-names = "mac-address";
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac1 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <1>;
nvmem-cells = <&macaddr_fw_env_0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac3 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <3>;
phy-handle = <&phy7>;
nvmem-cells = <&macaddr_fw_env_6>;
nvmem-cell-names = "mac-address";
};
&adm_dma {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@1,0 {
compatible = "pci168c,0046";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>;
nvmem-cell-names = "pre-calibration", "mac-address";
};
};
};
&pcie1 {
status = "okay";
reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
max-link-speed = <1>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi1: wifi@1,0 {
compatible = "pci168c,0040";
reg = <0x00010000 0 0 0 0>;
nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>;
nvmem-cell-names = "pre-calibration", "mac-address";
};
};
};

44
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts
View File

@ -1,44 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8065-nighthawk.dtsi"
/ {
model = "Netgear Nighthawk XR450";
compatible = "netgear,xr450", "qcom,ipq8065", "qcom,ipq8064";
};
&leds {
usb1 {
label = "white:usb1";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "white:usb2";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
&partitions {
partition@1880000 {
label = "ubi";
reg = <0x1880000 0xce00000>;
};
partition@e680000 {
label = "reserve";
reg = <0xe680000 0x0780000>;
read-only;
};
};
&wifi0 {
nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
&wifi1 {
nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};

44
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr500.dts
View File

@ -1,44 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8065-nighthawk.dtsi"
/ {
model = "Netgear Nighthawk XR500";
compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064";
};
&leds {
usb1 {
label = "white:usb1";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "white:usb2";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
&partitions {
partition@1880000 {
label = "ubi";
reg = <0x1880000 0xce00000>;
};
partition@e680000 {
label = "reserve";
reg = <0xe680000 0x0780000>;
read-only;
};
};
&wifi0 {
nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};
&wifi1 {
nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
nvmem-cell-names = "mac-address", "pre-calibration";
};

358
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ap3935.dts
View File

@ -1,358 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Extreme Networks AP3935";
compatible = "extreme,ap3935", "qcom,ipq8064";
memory@0 {
reg = <0x41400000 0x3ec00000>;
device_type = "memory";
};
aliases {
serial0 = &gsbi7_serial;
serial1 = &gsbi2_serial;
mdio-gpio0 = &mdio0;
ethernet0 = &gmac0;
ethernet1 = &gmac2;
led-boot = &led_power_green;
led-failsafe = &led_power_orange;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs-override = "ubi.block=0,0 root=/dev/ubiblock0_0";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power_green: power_green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
};
led_wlan2g_green {
label = "green:wlan2g";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_wlan5g_green {
label = "green:wlan5g";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led_lan1_green {
label = "green:lan1";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
led_lan1_orange {
label = "orange:lan1";
gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>;
};
led_lan2_green {
label = "green:lan2";
gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
};
led_lan2_orange {
label = "orange:lan2";
gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>;
};
};
};
&qcom_pinmux {
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19";
function = "gsbi5";
drive-strength = <10>;
bias-pull-down;
};
clk {
pins = "gpio21";
function = "gsbi5";
drive-strength = <12>;
bias-pull-down;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio22", "gpio23", "gpio24", "gpio25",
"gpio26", "gpio27", "gpio28", "gpio29";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
};
button_pins: button_pins {
mux {
pins = "gpio56";
function = "gpio";
bias-pull-up;
};
};
};
&gsbi2 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
gsbi2_serial: serial@12490000 {
status = "okay";
};
};
&gsbi4 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
serial@16340000 {
status = "disabled";
};
};
&gsbi7 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
gsbi7_serial: serial@16640000 {
status = "okay";
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfg1@2a0000 {
compatible = "u-boot,env-redundant-bool";
label = "CFG1";
reg = <0x2a0000 0x0010000>;
ethaddr: ethaddr {
#nvmem-cell-cells = <1>;
};
};
bootpri@2b0000 {
label = "BootPRI";
reg = <0x2b0000 0x0080000>;
};
cfg2@330000 {
label = "CFG2";
reg = <0x330000 0x0010000>;
};
fs@340000 {
label = "FS";
reg = <0x340000 0x0080000>;
};
priimg@3c0000 {
label = "PriImg";
reg = <0x3c0000 0x0e10000>;
};
secimg@11d0000 {
label = "SecImg";
reg = <0x11d0000 0x0e10000>;
};
};
};
};
};
&pcie0 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
};
};
};
&pcie1 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
};
};
};
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
nand@0 {
compatible = "qcom,nandcs";
reg = <0>;
nand-ecc-strength = <8>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ubi@0 {
label = "ubi";
reg = <0x0000000 0x20000000>;
};
};
};
};
&soc {
mdio1: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
phy1: ethernet-phy@1 {
reg = <1>;
};
phy2: ethernet-phy@2 {
reg = <2>;
};
};
};
&gmac0 {
status = "okay";
qcom,id = <0>;
mdiobus = <&mdio1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
nvmem-cells = <&ethaddr 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
qcom,id = <2>;
mdiobus = <&mdio1>;
phy-mode = "sgmii";
phy-handle = <&phy2>;
nvmem-cells = <&ethaddr 1>;
nvmem-cell-names = "mac-address";
};
&adm_dma {
status = "okay";
};

236
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi
View File

@ -1,236 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
#include "qcom-ipq8064-v2.0-smb208.dtsi"
/ {
memory {
device_type = "memory";
linux,usable-memory = <0x41500000 0x1ea00000>;
reg = <0x40000000 0x20000000>;
};
cpus {
idle-states {
CPU_SPC: spc {
status = "disabled";
};
};
};
chosen {
bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
};
};
&qcom_pinmux {
mdio0_pins_active: mdio0_pins_active {
mux {
pins = "gpio0", "gpio1";
function = "mdio";
drive-strength = <2>;
bias-pull-down;
output-low;
};
clk {
pins = "gpio1";
input-disable;
};
};
phy_active: phy_active {
phy {
pins = "gpio6", "gpio7";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-high;
};
};
uart1_pins: uart1_pins {
mux {
pins = "gpio51", "gpio52";
function = "gsbi1";
drive-strength = <4>;
bias-disable;
};
};
};
&gsbi1 {
status = "okay";
qcom,mode = <GSBI_PROT_UART_W_FC>;
serial@12450000 {
status = "okay";
pinctrl-0 = <&uart1_pins>;
pinctrl-names = "default";
};
};
&pcie0 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
bridge@0,0 {
reg = <0x0 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi0: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x10000 0 0 0 0>;
};
};
};
&pcie1 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
bridge@0,0 {
reg = <0x0 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi1: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x10000 0 0 0 0>;
};
};
};
&pcie2 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
bridge@0,0 {
reg = <0x0 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x10000 0 0 0 0>;
};
};
};
&adm_dma {
status = "okay";
};
&nand {
status = "okay";
nand@0 {
compatible = "qcom,nandcs";
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
nand-is-boot-medium;
qcom,boot-partitions = <0x0 0x2140000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "sbl1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "mibib";
reg = <0x40000 0x140000>;
read-only;
};
partition@180000 {
label = "sbl2";
reg = <0x180000 0x140000>;
read-only;
};
partition@2c0000 {
label = "sbl3";
reg = <0x2c0000 0x280000>;
read-only;
};
partition@540000 {
label = "ddrconfig";
reg = <0x540000 0x120000>;
read-only;
};
partition@660000 {
label = "ssd";
reg = <0x660000 0x120000>;
read-only;
};
partition@780000 {
label = "tz";
reg = <0x780000 0x280000>;
read-only;
};
partition@a00000 {
label = "rpm";
reg = <0xa00000 0x280000>;
read-only;
};
partition@1fc0000 {
label = "u-boot";
reg = <0x1fc0000 0x180000>;
read-only;
};
partition@21c0000 {
label = "bootkernel1";
reg = <0x21c0000 0xa80000>;
};
partition@2c40000 {
label = "bootkernel2";
reg = <0x2c40000 0xa80000>;
};
partition@36c0000 {
label = "ubi";
reg = <0x36c0000 0x46c0000>;
};
partition@7d80000 {
label = "art";
reg = <0x7d80000 0x200000>;
read-only;
};
};
};
};

332
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts
View File

@ -1,332 +0,0 @@
#include "qcom-ipq8064-v2.0-smb208.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Edgecore ECW5410";
compatible = "edgecore,ecw5410", "qcom,ipq8064";
reserved-memory {
nss@40000000 {
reg = <0x40000000 0x1000000>;
no-map;
};
smem: smem@41000000 {
reg = <0x41000000 0x200000>;
no-map;
};
wifi_dump@44000000 {
reg = <0x44000000 0x600000>;
no-map;
};
};
cpus {
idle-states {
CPU_SPC: spc {
status = "disabled";
};
};
};
aliases {
serial1 = &gsbi1_serial;
ethernet0 = &gmac2;
ethernet1 = &gmac3;
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power_green: power_green {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
};
wlan2g_green {
label = "green:wlan2g";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
};
wlan2g_yellow {
label = "yellow:wlan2g";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
};
wlan5g_green {
label = "green:wlan5g";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
led_power_red: power_red {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
};
wlan5g_yellow {
label = "yellow:wlan5g";
gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>;
};
};
};
&qcom_pinmux {
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19";
function = "gsbi5";
drive-strength = <10>;
bias-pull-down;
};
clk {
pins = "gpio21";
function = "gsbi5";
drive-strength = <12>;
bias-pull-down;
};
cs {
pins = "gpio20";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio16", "gpio23", "gpio24", "gpio26",
"gpio28", "gpio59";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
button_pins: button_pins {
mux {
pins = "gpio25";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
uart1_pins: uart1_pins {
mux {
pins = "gpio51", "gpio52", "gpio53", "gpio54";
function = "gsbi1";
drive-strength = <12>;
bias-none;
};
};
};
&gsbi1 {
qcom,mode = <GSBI_PROT_UART_W_FC>;
status = "okay";
serial@12450000 {
status = "okay";
pinctrl-0 = <&uart1_pins>;
pinctrl-names = "default";
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "qcom,smem-part";
};
};
};
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie1 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
};
};
};
&pcie2 {
status = "okay";
/delete-property/ pinctrl-0;
/delete-property/ pinctrl-names;
/delete-property/ perst-gpios;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
};
};
};
&nand {
status = "okay";
nand@0 {
compatible = "qcom,nandcs";
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
rootfs1@0 {
label = "rootfs1";
reg = <0x0000000 0x4000000>;
};
rootfs2@4000000 {
label = "rootfs2";
reg = <0x4000000 0x4000000>;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&gmac2 {
status = "okay";
qcom,id = <2>;
mdiobus = <&mdio0>;
phy-mode = "sgmii";
phy-handle = <&phy1>;
};
&gmac3 {
status = "okay";
qcom,id = <3>;
mdiobus = <&mdio0>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};
&adm_dma {
status = "okay";
};

233
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
View File

@ -1,233 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
#include "qcom-ipq8068-cryptid-common.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Meraki MR42";
compatible = "meraki,mr42", "qcom,ipq8064";
aliases {
serial1 = &gsbi1_serial;
ethernet0 = &gmac3;
led-boot = &led_active;
led-failsafe = &led_power;
led-running = &led_active;
led-upgrade = &led_active;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
};
led_active: active {
label = "white:active";
gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
};
};
};
&gmac3 {
status = "okay";
qcom,id = <3>;
mdiobus = <&mdio0>;
phy-mode = "sgmii";
phy-handle = <&phy2>;
nvmem-cells = <&mac_address 0>;
nvmem-cell-names = "mac-address";
};
&gsbi2 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
};
&gsbi2_i2c {
status = "okay";
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
ina2xx@40 {
compatible = "ina219";
shunt-resistor = <40000>;
reg = <0x40>;
};
eeprom@56 {
compatible = "atmel,24c64";
pagesize = <32>;
reg = <0x56>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
mac_address: mac-address@66 {
compatible = "mac-base";
reg = <0x66 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
&gsbi6 {
qcom,mode = <GSBI_PROT_I2C>;
status = "okay";
};
&gsbi6_i2c {
status = "okay";
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
tlc591xx@40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,tlc59108";
reg = <0x40>;
red@0 {
label = "red:user";
reg = <0x0>;
};
green@1 {
label = "green:user";
reg = <0x1>;
};
blue@2 {
label = "blue:user";
reg = <0x2>;
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
pinctrl-names = "default";
phy2: ethernet-phy2 {
reg = <2>;
reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
reset-assert-us = <24000>;
eee-broken-100tx;
eee-broken-1000t;
};
};
&qcom_pinmux {
i2c0_pins: i2c0_pins {
mux {
pins = "gpio24", "gpio25";
function = "gsbi2";
drive-strength = <2>;
bias-pull-up;
input;
};
};
button_pins: button_pins {
mux {
pins = "gpio26";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c1_pins: i2c1_pins {
mux {
pins = "gpio29", "gpio30";
function = "gsbi6";
drive-strength = <2>;
bias-pull-up;
input;
};
};
led_pins: led_pins {
mux {
pins = "gpio31", "gpio32";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-low;
};
};
};
&wifi0 {
nvmem-cells = <&mac_address 1>;
nvmem-cell-names = "mac-address";
};
&wifi1 {
nvmem-cells = <&mac_address 2>;
nvmem-cell-names = "mac-address";
};
&wifi2 {
nvmem-cells = <&mac_address 3>;
nvmem-cell-names = "mac-address";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};

258
target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr52.dts
View File

@ -1,258 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
#include "qcom-ipq8068-cryptid-common.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Meraki MR52";
compatible = "meraki,mr52", "qcom,ipq8064";
aliases {
serial1 = &gsbi1_serial;
mdio-gpio0 = &mdio_gpio0;
ethernet0 = &gmac2;
ethernet1 = &gmac3;
led-boot = &led_active;
led-failsafe = &led_power;
led-running = &led_active;
led-upgrade = &led_active;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_ORANGE>;
gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>;
};
lan2_green {
label = "green:lan2";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
lan1_green {
label = "green:lan1";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
led_active: active {
label = "white:active";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
lan2_orange {
label = "orange:lan2";
gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
};
lan1_orange {
label = "orange:lan1";
gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
};
};
};
&gmac2 {
status = "okay";
qcom,id = <2>;
mdiobus = <&mdio0>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
nvmem-cells = <&mac_address 0>;
nvmem-cell-names = "mac-address";
};
&gmac3 {
status = "okay";
qcom,id = <3>;
mdiobus = <&mdio_gpio0>;
phy-mode = "sgmii";
phy-handle = <&phy4>;
nvmem-cells = <&mac_address 1>;
nvmem-cell-names = "mac-address";
};
&gsbi7 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
};
&gsbi7_i2c {
status = "okay";
pinctrl-0 = <&i2c_pins>;
pinctrl-names = "default";
ina2xx@45 {
compatible = "ina219";
shunt-resistor = <80000>;
reg = <0x45>;
};
tlc591xx@49 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,tlc59108";
reg = <0x49>;
red@0 {
label = "red:user";
reg = <0x0>;
};
green@1 {
label = "green:user";
reg = <0x1>;
};
blue@2 {
label = "blue:user";
reg = <0x2>;
};
};
eeprom@52 {
compatible = "atmel,24c64";
pagesize = <32>;
reg = <0x52>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
mac_address: mac-address@66 {
compatible = "mac-base";
reg = <0x66 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
&qcom_pinmux {
i2c_pins: i2c_pins {
mux {
pins = "gpio8", "gpio9";
function = "gsbi7";
drive-strength = <2>;
bias-pull-up;
input;
};
};
led_pins: led_pins {
mux {
pins = "gpio19", "gpio26";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-low;
};
};
button_pins: button_pins {
mux {
pins = "gpio25";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
input;
};
};
};
&soc {
mdio_gpio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
pinctrl-names = "default";
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH
&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
phy0: ethernet-phy0 {
reg = <0>;
reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
reset-assert-us = <24000>;
};
phy4: ethernet-phy4 {
reg = <4>;
reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
reset-assert-us = <24000>;
};
};
};
&wifi0 {
nvmem-cells = <&mac_address 4>;
nvmem-cell-names = "mac-address";
};
&wifi1 {
nvmem-cells = <&mac_address 3>;
nvmem-cell-names = "mac-address";
};
&wifi2 {
nvmem-cells = <&mac_address 2>;
nvmem-cell-names = "mac-address";
};
&hs_phy_0 {
status = "okay";
};
&ss_phy_0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&hs_phy_1 {
status = "okay";
};
&ss_phy_1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};

60
target/linux/ipq806x/patches-6.1/001-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch
View File

@ -1,60 +0,0 @@
From 09be1a39e685d8c5edd471fd1cac9a8f8280d2de Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Tue, 8 Nov 2022 22:17:34 +0100
Subject: [PATCH] clk: qcom: kpss-xcc: register it as clk provider
krait-cc use this driver for the secondary mux. Register it as a clk
provider to correctly use this clk in other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108211734.3707-1-ansuelsmth@gmail.com
---
drivers/clk/qcom/kpss-xcc.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/clk/qcom/kpss-xcc.c
+++ b/drivers/clk/qcom/kpss-xcc.c
@@ -31,12 +31,13 @@ MODULE_DEVICE_TABLE(of, kpss_xcc_match_t
static int kpss_xcc_driver_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
const struct of_device_id *id;
void __iomem *base;
struct clk_hw *hw;
const char *name;
- id = of_match_device(kpss_xcc_match_table, &pdev->dev);
+ id = of_match_device(kpss_xcc_match_table, dev);
if (!id)
return -ENODEV;
@@ -45,7 +46,7 @@ static int kpss_xcc_driver_probe(struct
return PTR_ERR(base);
if (id->data) {
- if (of_property_read_string_index(pdev->dev.of_node,
+ if (of_property_read_string_index(dev->of_node,
"clock-output-names",
0, &name))
return -ENODEV;
@@ -55,12 +56,16 @@ static int kpss_xcc_driver_probe(struct
base += 0x28;
}
- hw = devm_clk_hw_register_mux_parent_data_table(&pdev->dev, name, aux_parents,
+ hw = devm_clk_hw_register_mux_parent_data_table(dev, name, aux_parents,
ARRAY_SIZE(aux_parents), 0,
base, 0, 0x3,
0, aux_parent_map, NULL);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
- return PTR_ERR_OR_ZERO(hw);
+ of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get, hw);
+
+ return 0;
}
static struct platform_driver kpss_xcc_driver = {

27
target/linux/ipq806x/patches-6.1/002-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch
View File

@ -1,27 +0,0 @@
From 3198106a99e73dbc4c02bd5128cec0997c73af82 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Tue, 8 Nov 2022 22:58:27 +0100
Subject: [PATCH 1/6] clk: qcom: krait-cc: use devm variant for clk notifier
register
Use devm variant for clk notifier register and correctly handle free
resource on driver remove.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108215827.30475-1-ansuelsmth@gmail.com
---
drivers/clk/qcom/krait-cc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -62,7 +62,7 @@ static int krait_notifier_register(struc
int ret = 0;
mux->clk_nb.notifier_call = krait_notifier_cb;
- ret = clk_notifier_register(clk, &mux->clk_nb);
+ ret = devm_clk_notifier_register(dev, clk, &mux->clk_nb);
if (ret)
dev_err(dev, "failed to register clock notifier: %d\n", ret);

46
target/linux/ipq806x/patches-6.1/002-v6.2-02-clk-qcom-krait-cc-fix-wrong-parent-order-for-seconda.patch
View File

@ -1,46 +0,0 @@
From 8e456411abcbf899c04740b9dbb3dcefcd61c946 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Wed, 9 Nov 2022 01:56:27 +0100
Subject: [PATCH 2/6] clk: qcom: krait-cc: fix wrong parent order for secondary
mux
The secondary mux parent order is swapped.
This currently doesn't cause problems as the secondary mux is used for idle
clk and as a safe clk source while reprogramming the hfpll.
Each mux have 2 or more output but he always have a safe source to
switch while reprogramming the connected pll. We use a clk notifier to
switch to the correct parent before clk core can apply the correct rate.
The parent to switch is hardcoded in the mux struct.
For the secondary mux the safe source to use is the qsb parent as it's
the only fixed clk as the acpus_aux is a pll that can source from pxo or
from pll8.
The hardcoded safe parent for the secondary mux is set to index 0 that
in the secondary mux map is set to 2.
But the index 0 is actually acpu_aux in the parent list.
Fix the swapped parents to correctly handle idle frequency and output a
sane clk_summary report.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-1-ansuelsmth@gmail.com
---
drivers/clk/qcom/krait-cc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -116,8 +116,8 @@ krait_add_sec_mux(struct device *dev, in
int ret;
struct krait_mux_clk *mux;
static const char *sec_mux_list[] = {
- "acpu_aux",
"qsb",
+ "acpu_aux",
};
struct clk_init_data init = {
.parent_names = sec_mux_list,

68
target/linux/ipq806x/patches-6.1/002-v6.2-03-clk-qcom-krait-cc-also-enable-secondary-mux-and-div-.patch
View File

@ -1,68 +0,0 @@
From 18ae57b1e8abee6c453381470f6e18991d2901a8 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Wed, 9 Nov 2022 01:56:28 +0100
Subject: [PATCH 3/6] clk: qcom: krait-cc: also enable secondary mux and div
clk
clk-krait ignore any rate change if clk is not flagged as enabled.
Correctly enable the secondary mux and div clk to correctly change rate
instead of silently ignoring the request.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-2-ansuelsmth@gmail.com
---
drivers/clk/qcom/krait-cc.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -80,6 +80,7 @@ krait_add_div(struct device *dev, int id
};
const char *p_names[1];
struct clk *clk;
+ int cpu;
div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
if (!div)
@@ -103,6 +104,17 @@ krait_add_div(struct device *dev, int id
}
clk = devm_clk_register(dev, &div->hw);
+ if (IS_ERR(clk))
+ goto err;
+
+ /* clk-krait ignore any rate change if mux is not flagged as enabled */
+ if (id < 0)
+ for_each_online_cpu(cpu)
+ clk_prepare_enable(div->hw.clk);
+ else
+ clk_prepare_enable(div->hw.clk);
+
+err:
kfree(p_names[0]);
kfree(init.name);
@@ -113,7 +125,7 @@ static int
krait_add_sec_mux(struct device *dev, int id, const char *s,
unsigned int offset, bool unique_aux)
{
- int ret;
+ int cpu, ret;
struct krait_mux_clk *mux;
static const char *sec_mux_list[] = {
"qsb",
@@ -165,6 +177,13 @@ krait_add_sec_mux(struct device *dev, in
if (ret)
goto unique_aux;
+ /* clk-krait ignore any rate change if mux is not flagged as enabled */
+ if (id < 0)
+ for_each_online_cpu(cpu)
+ clk_prepare_enable(mux->hw.clk);
+ else
+ clk_prepare_enable(mux->hw.clk);
+
unique_aux:
if (unique_aux)
kfree(sec_mux_list[0]);

48
target/linux/ipq806x/patches-6.1/002-v6.2-04-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch
View File

@ -1,48 +0,0 @@
From e5dc1a4c01510da8438dddfdf4200b79d73990dc Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Wed, 9 Nov 2022 01:56:29 +0100
Subject: [PATCH 4/6] clk: qcom: krait-cc: handle secondary mux sourcing out of
acpu_aux
Some bootloader may leave the system in an even more undefined state
with the secondary mux of L2 or other cores sourcing out of the acpu_aux
parent. This results in the clk set to the PXO rate or a PLL8 rate.
The current logic to reset the mux and set them to a defined state only
handle if the mux are configured to source out of QSB. Change this and
force a new and defined state if the current clk is lower than the aux
rate. This way we can handle any wrong configuration where the mux is
sourcing out of QSB (rate 225MHz, currently set to a virtual rate of 1),
PXO rate (rate 25MHz) or PLL8 (needs to be configured to run at 384Mhz).
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-3-ansuelsmth@gmail.com
---
drivers/clk/qcom/krait-cc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -383,8 +383,8 @@ static int krait_cc_probe(struct platfor
*/
cur_rate = clk_get_rate(l2_pri_mux_clk);
aux_rate = 384000000;
- if (cur_rate == 1) {
- pr_info("L2 @ QSB rate. Forcing new rate.\n");
+ if (cur_rate < aux_rate) {
+ pr_info("L2 @ Undefined rate. Forcing new rate.\n");
cur_rate = aux_rate;
}
clk_set_rate(l2_pri_mux_clk, aux_rate);
@@ -394,8 +394,8 @@ static int krait_cc_probe(struct platfor
for_each_possible_cpu(cpu) {
clk = clks[cpu];
cur_rate = clk_get_rate(clk);
- if (cur_rate == 1) {
- pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu);
+ if (cur_rate < aux_rate) {
+ pr_info("CPU%d @ Undefined rate. Forcing new rate.\n", cpu);
cur_rate = aux_rate;
}

104
target/linux/ipq806x/patches-6.1/002-v6.2-05-clk-qcom-krait-cc-convert-to-devm_clk_hw_register.patch
View File

@ -1,104 +0,0 @@
From 8ea9fb841a7e528bc8ae79d726ce951dcf7b46e2 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Wed, 9 Nov 2022 01:56:30 +0100
Subject: [PATCH 5/6] clk: qcom: krait-cc: convert to devm_clk_hw_register
clk_register is now deprecated. Convert the driver to devm_clk_hw_register.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-4-ansuelsmth@gmail.com
---
drivers/clk/qcom/krait-cc.c | 31 +++++++++++++++++++------------
1 file changed, 19 insertions(+), 12 deletions(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -79,8 +79,7 @@ krait_add_div(struct device *dev, int id
.flags = CLK_SET_RATE_PARENT,
};
const char *p_names[1];
- struct clk *clk;
- int cpu;
+ int cpu, ret;
div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
if (!div)
@@ -103,8 +102,8 @@ krait_add_div(struct device *dev, int id
return -ENOMEM;
}
- clk = devm_clk_register(dev, &div->hw);
- if (IS_ERR(clk))
+ ret = devm_clk_hw_register(dev, &div->hw);
+ if (ret)
goto err;
/* clk-krait ignore any rate change if mux is not flagged as enabled */
@@ -118,7 +117,7 @@ err:
kfree(p_names[0]);
kfree(init.name);
- return PTR_ERR_OR_ZERO(clk);
+ return ret;
}
static int
@@ -137,7 +136,6 @@ krait_add_sec_mux(struct device *dev, in
.ops = &krait_mux_clk_ops,
.flags = CLK_SET_RATE_PARENT,
};
- struct clk *clk;
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
@@ -166,14 +164,16 @@ krait_add_sec_mux(struct device *dev, in
if (unique_aux) {
sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
if (!sec_mux_list[0]) {
- clk = ERR_PTR(-ENOMEM);
+ ret = -ENOMEM;
goto err_aux;
}
}
- clk = devm_clk_register(dev, &mux->hw);
+ ret = devm_clk_hw_register(dev, &mux->hw);
+ if (ret)
+ goto unique_aux;
- ret = krait_notifier_register(dev, clk, mux);
+ ret = krait_notifier_register(dev, mux->hw.clk, mux);
if (ret)
goto unique_aux;
@@ -189,7 +189,7 @@ unique_aux:
kfree(sec_mux_list[0]);
err_aux:
kfree(init.name);
- return PTR_ERR_OR_ZERO(clk);
+ return ret;
}
static struct clk *
@@ -241,11 +241,18 @@ krait_add_pri_mux(struct device *dev, in
goto err_p2;
}
- clk = devm_clk_register(dev, &mux->hw);
+ ret = devm_clk_hw_register(dev, &mux->hw);
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err_p3;
+ }
+
+ clk = mux->hw.clk;
ret = krait_notifier_register(dev, clk, mux);
if (ret)
- goto err_p3;
+ clk = ERR_PTR(ret);
+
err_p3:
kfree(p_names[2]);
err_p2:

414
target/linux/ipq806x/patches-6.1/002-v6.2-06-clk-qcom-krait-cc-convert-to-parent_data-API.patch
View File

@ -1,414 +0,0 @@
From 56a655e1c41a86445cf2de656649ad93424b2a63 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Wed, 9 Nov 2022 01:56:31 +0100
Subject: [PATCH 6/6] clk: qcom: krait-cc: convert to parent_data API
Modernize the krait-cc driver to parent-data API and refactor to drop
any use of parent_names. From Documentation all the required clocks should
be declared in DTS so fw_name can be correctly used to get the parents
for all the muxes. .name is also declared to save compatibility with old
DT.
While at it also drop some hardcoded index and introduce an enum to make
index values more clear.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-5-ansuelsmth@gmail.com
---
drivers/clk/qcom/krait-cc.c | 202 ++++++++++++++++++++----------------
1 file changed, 112 insertions(+), 90 deletions(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -15,6 +15,16 @@
#include "clk-krait.h"
+enum {
+ cpu0_mux = 0,
+ cpu1_mux,
+ cpu2_mux,
+ cpu3_mux,
+ l2_mux,
+
+ clks_max,
+};
+
static unsigned int sec_mux_map[] = {
2,
0,
@@ -69,21 +79,23 @@ static int krait_notifier_register(struc
return ret;
}
-static int
+static struct clk_hw *
krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
{
struct krait_div2_clk *div;
+ static struct clk_parent_data p_data[1];
struct clk_init_data init = {
- .num_parents = 1,
+ .num_parents = ARRAY_SIZE(p_data),
.ops = &krait_div2_clk_ops,
.flags = CLK_SET_RATE_PARENT,
};
- const char *p_names[1];
+ struct clk_hw *clk;
+ char *parent_name;
int cpu, ret;
div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
if (!div)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
div->width = 2;
div->shift = 6;
@@ -93,18 +105,25 @@ krait_add_div(struct device *dev, int id
init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
if (!init.name)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
- init.parent_names = p_names;
- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
- if (!p_names[0]) {
- kfree(init.name);
- return -ENOMEM;
+ init.parent_data = p_data;
+ parent_name = kasprintf(GFP_KERNEL, "hfpll%s", s);
+ if (!parent_name) {
+ clk = ERR_PTR(-ENOMEM);
+ goto err_parent_name;
}
+ p_data[0].fw_name = parent_name;
+ p_data[0].name = parent_name;
+
ret = devm_clk_hw_register(dev, &div->hw);
- if (ret)
- goto err;
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err_clk;
+ }
+
+ clk = &div->hw;
/* clk-krait ignore any rate change if mux is not flagged as enabled */
if (id < 0)
@@ -113,33 +132,36 @@ krait_add_div(struct device *dev, int id
else
clk_prepare_enable(div->hw.clk);
-err:
- kfree(p_names[0]);
+err_clk:
+ kfree(parent_name);
+err_parent_name:
kfree(init.name);
- return ret;
+ return clk;
}
-static int
+static struct clk_hw *
krait_add_sec_mux(struct device *dev, int id, const char *s,
unsigned int offset, bool unique_aux)
{
int cpu, ret;
struct krait_mux_clk *mux;
- static const char *sec_mux_list[] = {
- "qsb",
- "acpu_aux",
+ static struct clk_parent_data sec_mux_list[2] = {
+ { .name = "qsb", .fw_name = "qsb" },
+ {},
};
struct clk_init_data init = {
- .parent_names = sec_mux_list,
+ .parent_data = sec_mux_list,
.num_parents = ARRAY_SIZE(sec_mux_list),
.ops = &krait_mux_clk_ops,
.flags = CLK_SET_RATE_PARENT,
};
+ struct clk_hw *clk;
+ char *parent_name;
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
mux->offset = offset;
mux->lpl = id >= 0;
@@ -159,23 +181,33 @@ krait_add_sec_mux(struct device *dev, in
init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
if (!init.name)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
if (unique_aux) {
- sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
- if (!sec_mux_list[0]) {
- ret = -ENOMEM;
+ parent_name = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
+ if (!parent_name) {
+ clk = ERR_PTR(-ENOMEM);
goto err_aux;
}
+ sec_mux_list[1].fw_name = parent_name;
+ sec_mux_list[1].name = parent_name;
+ } else {
+ sec_mux_list[1].name = "apu_aux";
}
ret = devm_clk_hw_register(dev, &mux->hw);
- if (ret)
- goto unique_aux;
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err_clk;
+ }
+
+ clk = &mux->hw;
ret = krait_notifier_register(dev, mux->hw.clk, mux);
- if (ret)
- goto unique_aux;
+ if (ret) {
+ clk = ERR_PTR(ret);
+ goto err_clk;
+ }
/* clk-krait ignore any rate change if mux is not flagged as enabled */
if (id < 0)
@@ -184,28 +216,29 @@ krait_add_sec_mux(struct device *dev, in
else
clk_prepare_enable(mux->hw.clk);
-unique_aux:
+err_clk:
if (unique_aux)
- kfree(sec_mux_list[0]);
+ kfree(parent_name);
err_aux:
kfree(init.name);
- return ret;
+ return clk;
}
-static struct clk *
-krait_add_pri_mux(struct device *dev, int id, const char *s,
- unsigned int offset)
+static struct clk_hw *
+krait_add_pri_mux(struct device *dev, struct clk_hw *hfpll_div, struct clk_hw *sec_mux,
+ int id, const char *s, unsigned int offset)
{
int ret;
struct krait_mux_clk *mux;
- const char *p_names[3];
+ static struct clk_parent_data p_data[3];
struct clk_init_data init = {
- .parent_names = p_names,
- .num_parents = ARRAY_SIZE(p_names),
+ .parent_data = p_data,
+ .num_parents = ARRAY_SIZE(p_data),
.ops = &krait_mux_clk_ops,
.flags = CLK_SET_RATE_PARENT,
};
- struct clk *clk;
+ struct clk_hw *clk;
+ char *hfpll_name;
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
@@ -223,55 +256,44 @@ krait_add_pri_mux(struct device *dev, in
if (!init.name)
return ERR_PTR(-ENOMEM);
- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
- if (!p_names[0]) {
+ hfpll_name = kasprintf(GFP_KERNEL, "hfpll%s", s);
+ if (!hfpll_name) {
clk = ERR_PTR(-ENOMEM);
- goto err_p0;
+ goto err_hfpll;
}
- p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
- if (!p_names[1]) {
- clk = ERR_PTR(-ENOMEM);
- goto err_p1;
- }
+ p_data[0].fw_name = hfpll_name;
+ p_data[0].name = hfpll_name;
- p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
- if (!p_names[2]) {
- clk = ERR_PTR(-ENOMEM);
- goto err_p2;
- }
+ p_data[1].hw = hfpll_div;
+ p_data[2].hw = sec_mux;
ret = devm_clk_hw_register(dev, &mux->hw);
if (ret) {
clk = ERR_PTR(ret);
- goto err_p3;
+ goto err_clk;
}
- clk = mux->hw.clk;
+ clk = &mux->hw;
- ret = krait_notifier_register(dev, clk, mux);
+ ret = krait_notifier_register(dev, mux->hw.clk, mux);
if (ret)
clk = ERR_PTR(ret);
-err_p3:
- kfree(p_names[2]);
-err_p2:
- kfree(p_names[1]);
-err_p1:
- kfree(p_names[0]);
-err_p0:
+err_clk:
+ kfree(hfpll_name);
+err_hfpll:
kfree(init.name);
return clk;
}
/* id < 0 for L2, otherwise id == physical CPU number */
-static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
+static struct clk_hw *krait_add_clks(struct device *dev, int id, bool unique_aux)
{
- int ret;
+ struct clk_hw *hfpll_div, *sec_mux, *pri_mux;
unsigned int offset;
void *p = NULL;
const char *s;
- struct clk *clk;
if (id >= 0) {
offset = 0x4501 + (0x1000 * id);
@@ -283,22 +305,23 @@ static struct clk *krait_add_clks(struct
s = "_l2";
}
- ret = krait_add_div(dev, id, s, offset);
- if (ret) {
- clk = ERR_PTR(ret);
+ hfpll_div = krait_add_div(dev, id, s, offset);
+ if (IS_ERR(hfpll_div)) {
+ pri_mux = hfpll_div;
goto err;
}
- ret = krait_add_sec_mux(dev, id, s, offset, unique_aux);
- if (ret) {
- clk = ERR_PTR(ret);
+ sec_mux = krait_add_sec_mux(dev, id, s, offset, unique_aux);
+ if (IS_ERR(sec_mux)) {
+ pri_mux = sec_mux;
goto err;
}
- clk = krait_add_pri_mux(dev, id, s, offset);
+ pri_mux = krait_add_pri_mux(dev, hfpll_div, sec_mux, id, s, offset);
+
err:
kfree(p);
- return clk;
+ return pri_mux;
}
static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
@@ -306,7 +329,7 @@ static struct clk *krait_of_get(struct o
unsigned int idx = clkspec->args[0];
struct clk **clks = data;
- if (idx >= 5) {
+ if (idx >= clks_max) {
pr_err("%s: invalid clock index %d\n", __func__, idx);
return ERR_PTR(-EINVAL);
}
@@ -327,9 +350,8 @@ static int krait_cc_probe(struct platfor
const struct of_device_id *id;
unsigned long cur_rate, aux_rate;
int cpu;
- struct clk *clk;
- struct clk **clks;
- struct clk *l2_pri_mux_clk;
+ struct clk_hw *mux, *l2_pri_mux;
+ struct clk *clk, **clks;
id = of_match_device(krait_cc_match_table, dev);
if (!id)
@@ -348,21 +370,21 @@ static int krait_cc_probe(struct platfor
}
/* Krait configurations have at most 4 CPUs and one L2 */
- clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL);
+ clks = devm_kcalloc(dev, clks_max, sizeof(*clks), GFP_KERNEL);
if (!clks)
return -ENOMEM;
for_each_possible_cpu(cpu) {
- clk = krait_add_clks(dev, cpu, id->data);
+ mux = krait_add_clks(dev, cpu, id->data);
if (IS_ERR(clk))
return PTR_ERR(clk);
- clks[cpu] = clk;
+ clks[cpu] = mux->clk;
}
- l2_pri_mux_clk = krait_add_clks(dev, -1, id->data);
- if (IS_ERR(l2_pri_mux_clk))
- return PTR_ERR(l2_pri_mux_clk);
- clks[4] = l2_pri_mux_clk;
+ l2_pri_mux = krait_add_clks(dev, -1, id->data);
+ if (IS_ERR(l2_pri_mux))
+ return PTR_ERR(l2_pri_mux);
+ clks[l2_mux] = l2_pri_mux->clk;
/*
* We don't want the CPU or L2 clocks to be turned off at late init
@@ -372,7 +394,7 @@ static int krait_cc_probe(struct platfor
* they take over.
*/
for_each_online_cpu(cpu) {
- clk_prepare_enable(l2_pri_mux_clk);
+ clk_prepare_enable(clks[l2_mux]);
WARN(clk_prepare_enable(clks[cpu]),
"Unable to turn on CPU%d clock", cpu);
}
@@ -388,16 +410,16 @@ static int krait_cc_probe(struct platfor
* two different rates to force a HFPLL reinit under all
* circumstances.
*/
- cur_rate = clk_get_rate(l2_pri_mux_clk);
+ cur_rate = clk_get_rate(clks[l2_mux]);
aux_rate = 384000000;
if (cur_rate < aux_rate) {
pr_info("L2 @ Undefined rate. Forcing new rate.\n");
cur_rate = aux_rate;
}
- clk_set_rate(l2_pri_mux_clk, aux_rate);
- clk_set_rate(l2_pri_mux_clk, 2);
- clk_set_rate(l2_pri_mux_clk, cur_rate);
- pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000);
+ clk_set_rate(clks[l2_mux], aux_rate);
+ clk_set_rate(clks[l2_mux], 2);
+ clk_set_rate(clks[l2_mux], cur_rate);
+ pr_info("L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000);
for_each_possible_cpu(cpu) {
clk = clks[cpu];
cur_rate = clk_get_rate(clk);

28
target/linux/ipq806x/patches-6.1/003-v6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch
View File

@ -1,28 +0,0 @@
From c9713e4ede1e5d044b64fe4d3cbb84223625637f Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Tue, 25 Oct 2022 01:38:17 +0200
Subject: [PATCH] ARM: dts: qcom: ipq8064: disable mmc-ddr-1_8v for sdcc1
It was reported non working mmc with this option enabled.
Both mmc for ipq8064 are supplied by a fixed 3.3v regulator so mmc can't
be run at 1.8v.
Disable it to restore correct functionality of this SoC feature.
Tested-by: Hendrik Koerner <koerhen@web.de>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024233817.27410-1-ansuelsmth@gmail.com
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 -
1 file changed, 1 deletion(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -756,7 +756,6 @@
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
- mmc-ddr-1_8v;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";

42
target/linux/ipq806x/patches-6.1/004-v6.2-01-thermal-drivers-qcom-tsens-Init-debugfs-only-with-su.patch
View File

@ -1,42 +0,0 @@
From de48d8766afcd97d147699aaff78a338081c9973 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Sat, 22 Oct 2022 14:56:55 +0200
Subject: [PATCH 1/3] thermal/drivers/qcom/tsens: Init debugfs only with
successful probe
Calibrate and tsens_register can fail or PROBE_DEFER. This will cause a
double or a wrong init of the debugfs information. Init debugfs only
with successful probe fixing warning about directory already present.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20221022125657.22530-2-ansuelsmth@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
---
drivers/thermal/qcom/tsens.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -918,8 +918,6 @@ int __init init_common(struct tsens_priv
if (tsens_version(priv) >= VER_0_1)
tsens_enable_irq(priv);
- tsens_debug_init(op);
-
err_put_device:
put_device(&op->dev);
return ret;
@@ -1156,7 +1154,11 @@ static int tsens_probe(struct platform_d
}
}
- return tsens_register(priv);
+ ret = tsens_register(priv);
+ if (!ret)
+ tsens_debug_init(pdev);
+
+ return ret;
}
static int tsens_remove(struct platform_device *pdev)

29
target/linux/ipq806x/patches-6.1/004-v6.2-02-thermal-drivers-qcom-tsens-Fix-wrong-version-id-dbg_.patch
View File

@ -1,29 +0,0 @@
From c7e077e921fa94e0c06c8d14af6c0504c8a5f4bd Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Sat, 22 Oct 2022 14:56:56 +0200
Subject: [PATCH 2/3] thermal/drivers/qcom/tsens: Fix wrong version id
dbg_version_show
For VER_0 the version was incorrectly reported as 0.1.0.
Fix that and correctly report the major version for this old tsens
revision.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20221022125657.22530-3-ansuelsmth@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
---
drivers/thermal/qcom/tsens.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -692,7 +692,7 @@ static int dbg_version_show(struct seq_f
return ret;
seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
} else {
- seq_puts(s, "0.1.0\n");
+ seq_printf(s, "0.%d.0\n", priv->feat->ver_major);
}
return 0;

54
target/linux/ipq806x/patches-6.1/004-v6.2-03-thermal-drivers-qcom-tsens-Rework-debugfs-file-struc.patch
View File

@ -1,54 +0,0 @@
From 89992d95ed1046338c7866ef7bbe6de543a2af91 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Sat, 22 Oct 2022 14:56:57 +0200
Subject: [PATCH 3/3] thermal/drivers/qcom/tsens: Rework debugfs file structure
The current tsens debugfs structure is composed by:
- a tsens dir in debugfs with a version file
- a directory for each tsens istance with sensors file to dump all the
sensors value.
This works on the assumption that we have the same version for each
istance but this assumption seems fragile and with more than one tsens
istance results in the version file not tracking each of them.
A better approach is to just create a subdirectory for each tsens
istance and put there version and sensors debugfs file.
Using this new implementation results in less code since debugfs entry
are created only on successful tsens probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
---
drivers/thermal/qcom/tsens.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -704,21 +704,14 @@ DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
static void tsens_debug_init(struct platform_device *pdev)
{
struct tsens_priv *priv = platform_get_drvdata(pdev);
- struct dentry *root, *file;
- root = debugfs_lookup("tsens", NULL);
- if (!root)
+ priv->debug_root = debugfs_lookup("tsens", NULL);
+ if (!priv->debug_root)
priv->debug_root = debugfs_create_dir("tsens", NULL);
- else
- priv->debug_root = root;
-
- file = debugfs_lookup("version", priv->debug_root);
- if (!file)
- debugfs_create_file("version", 0444, priv->debug_root,
- pdev, &dbg_version_fops);
/* A directory for each instance of the TSENS IP */
priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
+ debugfs_create_file("version", 0444, priv->debug, pdev, &dbg_version_fops);
debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
}
#else

25
target/linux/ipq806x/patches-6.1/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
View File

@ -1,25 +0,0 @@
From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Thu, 9 Mar 2017 09:31:44 +0100
Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/mtd/mtdpart.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -51,7 +51,11 @@ static struct mtd_info *allocate_partiti
/* allocate the partition structure */
child = kzalloc(sizeof(*child), GFP_KERNEL);
- name = kstrdup(part->name, GFP_KERNEL);
+ /* "rootfs" conflicts with OpenWrt auto mounting */
+ if (mtd_type_is_nand(parent) && !strcmp(part->name, "rootfs"))
+ name = "ubi";
+ else
+ name = kstrdup(part->name, GFP_KERNEL);
if (!name || !child) {
printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
parent->name);

89
target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch
View File

@ -1,89 +0,0 @@
From bef5018abb7cf94efafdc05087b4c998891ae4ec Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Mon, 17 Jan 2022 23:39:34 +0100
Subject: [PATCH v3 10/18] ARM: dts: qcom: add saw for l2 cache and kraitcc for
ipq8064
Add saw compatible for l2 cache and kraitcc node for ipq8064 dtsi.
Also declare clock-output-names for acc0 and acc1 and qsb fixed clock
for the secondary mux.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++--
1 file changed, 32 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -301,6 +301,12 @@
};
clocks {
+ qsb: qsb {
+ compatible = "fixed-clock";
+ clock-frequency = <225000000>;
+ #clock-cells = <0>;
+ };
+
cxo_board: cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -575,15 +581,30 @@
clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
clock-names = "pll8_vote", "pxo";
clock-output-names = "acpu_l2_aux";
+ #clock-cells = <0>;
+ };
+
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>,
+ <&acc0>, <&acc1>, <&l2cc>, <&qsb>, <&pxo_board>;
+ clock-names = "hfpll0", "hfpll1", "hfpll_l2",
+ "acpu0_aux", "acpu1_aux", "acpu_l2_aux",
+ "qsb", "pxo";
+ #clock-cells = <1>;
};
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu0_aux";
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ #clock-cells = <0>;
};
saw0: regulator@2089000 {
- compatible = "qcom,saw2";
+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
regulator;
};
@@ -591,14 +612,24 @@
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu1_aux";
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ #clock-cells = <0>;
};
saw1: regulator@2099000 {
- compatible = "qcom,saw2";
+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
regulator;
};
+ saw_l2: regulator@02012000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02012000 0x1000>;
+ regulator;
+ };
+
nss_common: syscon@03000000 {
compatible = "syscon";
reg = <0x03000000 0x0000FFFF>;

268
target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch
View File

@ -1,268 +0,0 @@
From 076ebb6e1799c4c7a1d2e07510d88b9e9b57b551 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Tue, 18 Jan 2022 00:03:47 +0100
Subject: [PATCH v3 13/18] ARM: dts: qcom: add opp table for cpu and l2 for
ipq8064
Add opp table for cpu and l2 cache. While the current cpufreq is
the generic one that doesn't scale the L2 cache, we add the l2
cache opp anyway for the sake of completeness. This will be handy in the
future when a dedicated cpufreq driver is introduced for krait cores
that will correctly scale l2 cache with the core freq.
Opp-level is set based on the logic of
0: idle level
1: normal level
2: turbo level
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 99 +++++++++++++++++++++++++++++
1 file changed, 99 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -48,6 +48,105 @@
};
};
+ opp_table_l2: opp_table_l2 {
+ compatible = "operating-points-v2";
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <100000>;
+ opp-level = <0>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+ };
+
+ opp_table0: opp_table0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+
+ /*
+ * Voltage thresholds are <target min max>
+ */
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>;
+ opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <0>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>;
+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>;
+ opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>;
+ opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>;
+ opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>;
+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
+ opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+ };
+
thermal-zones {
sensor0-thermal {
polling-delay-passive = <0>;
--- a/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -6,3 +6,92 @@
model = "Qualcomm Technologies, Inc. IPQ8065";
compatible = "qcom,ipq8065", "qcom,ipq8064";
};
+
+&opp_table_l2 {
+ /delete-node/opp-1200000000;
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+};
+
+&opp_table0 {
+ /*
+ * On ipq8065 1.2 ghz freq is not present
+ * Remove it to make cpufreq work and not
+ * complain for missing definition
+ */
+
+ /delete-node/opp-1200000000;
+
+ /*
+ * Voltage thresholds are <target min max>
+ */
+ opp-384000000 {
+ opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
+ opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
+ opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
+ };
+
+ opp-600000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
+ opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
+ };
+
+ opp-800000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
+ };
+
+ opp-1000000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
+ };
+
+ opp-1400000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
+ opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
+ opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
+ opp-level = <1>;
+ };
+
+ opp-1725000000 {
+ opp-hz = /bits/ 64 <1725000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
+ opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
+ opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
+ opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
+ opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+};
--- a/arch/arm/boot/dts/qcom-ipq8062.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi
@@ -6,3 +6,39 @@
model = "Qualcomm Technologies, Inc. IPQ8062";
compatible = "qcom,ipq8062", "qcom,ipq8064";
};
+
+&opp_table0 {
+ /delete-node/opp-1200000000;
+ /delete-node/opp-1400000000;
+
+ /*
+ * Voltage thresholds are <target min max>
+ */
+ opp-384000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs1-v0 = < 925000 878750 971250>;
+ opp-microvolt-speed0-pvs2-v0 = < 875000 831250 918750>;
+ opp-microvolt-speed0-pvs3-v0 = < 800000 760000 840000>;
+ };
+
+ opp-600000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
+ opp-microvolt-speed0-pvs2-v0 = < 925000 878750 971250>;
+ opp-microvolt-speed0-pvs3-v0 = < 850000 807500 892500>;
+ };
+
+ opp-800000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs2-v0 = < 995000 945250 1044750>;
+ opp-microvolt-speed0-pvs3-v0 = < 900000 855000 945000>;
+ };
+
+ opp-1000000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs3-v0 = < 950000 902500 997500>;
+ };
+};

153
target/linux/ipq806x/patches-6.1/107-15-ARM-dts-qcom-add-multiple-missing-binding-for-cpu.patch
View File

@ -1,153 +0,0 @@
From 211fc0c0a63c99b68663a27182e643316c2d8cbe Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Tue, 18 Jan 2022 00:07:57 +0100
Subject: [PATCH v3 15/18] ARM: dts: qcom: add multiple missing binding for cpu
and l2 for ipq8064
Add multiple binding for cpu node, l2 node and add idle-states
definition for ipq8064 dtsi.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -30,6 +30,15 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
};
cpu1: cpu@1 {
@@ -40,11 +49,35 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
+ };
+
+ idle-states {
+ CPU_SPC: spc {
+ compatible = "qcom,idle-state-spc";
+ status = "disabled";
+ entry-latency-us = <400>;
+ exit-latency-us = <900>;
+ min-residency-us = <3000>;
+ };
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+
+ clocks = <&kraitcc 4>;
+ clock-names = "l2";
+ operating-points-v2 = <&opp_table_l2>;
};
};
--- a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
@@ -2,6 +2,18 @@
#include "qcom-ipq8064.dtsi"
+&cpu0 {
+ cpu-supply = <&smb208_s2a>;
+};
+
+&cpu1 {
+ cpu-supply = <&smb208_s2b>;
+};
+
+&L2 {
+ l2-supply = <&smb208_s1a>;
+};
+
&rpm {
smb208_regulators: regulators {
compatible = "qcom,rpm-smb208-regulators";
--- a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
@@ -2,6 +2,18 @@
#include "qcom-ipq8064-v2.0.dtsi"
+&cpu0 {
+ cpu-supply = <&smb208_s2a>;
+};
+
+&cpu1 {
+ cpu-supply = <&smb208_s2b>;
+};
+
+&L2 {
+ l2-supply = <&smb208_s1a>;
+};
+
&rpm {
smb208_regulators: regulators {
compatible = "qcom,rpm-smb208-regulators";
--- a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
@@ -2,6 +2,18 @@
#include "qcom-ipq8062.dtsi"
+&cpu0 {
+ cpu-supply = <&smb208_s2a>;
+};
+
+&cpu1 {
+ cpu-supply = <&smb208_s2b>;
+};
+
+&L2 {
+ l2-supply = <&smb208_s1a>;
+};
+
&rpm {
smb208_regulators: regulators {
compatible = "qcom,rpm-smb208-regulators";
--- a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
@@ -2,6 +2,18 @@
#include "qcom-ipq8065.dtsi"
+&cpu0 {
+ cpu-supply = <&smb208_s2a>;
+};
+
+&cpu1 {
+ cpu-supply = <&smb208_s2b>;
+};
+
+&L2 {
+ l2-supply = <&smb208_s1a>;
+};
+
&rpm {
smb208_regulators: regulators {
compatible = "qcom,rpm-smb208-regulators";

29
target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch
View File

@ -1,29 +0,0 @@
From 6c94e0184e56f9e9f1f5d5f54b20758433e498d2 Mon Sep 17 00:00:00 2001
From: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Date: Wed, 15 Jun 2022 16:47:09 +0200
Subject: [PATCH 1/2] ARM: dts: qcom: fix wrong nad_pins definition for ipq806x
Fix wrong nand_pings definition for bias-disable pins.
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -599,12 +599,9 @@
};
nand_pins: nand_pins {
- mux {
+ disable {
pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
+ "gpio37", "gpio38";
function = "nand";
drive-strength = <10>;
bias-disable;

188
target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch
View File

@ -1,188 +0,0 @@
From 504188183408fac0f61b59f5ed8ea1773fe43669 Mon Sep 17 00:00:00 2001
From: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Date: Wed, 15 Jun 2022 16:59:30 +0200
Subject: [PATCH 2/2] ARM: dts: qcom: add MDIO dedicated controller node for
ipq806x
Add MDIO dedicated controller attached to gmac0 and fix rb3011 dts to
correctly use the new tag.
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
---
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 134 +++++++++++-----------
arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++
2 files changed, 81 insertions(+), 67 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -25,73 +25,6 @@
device_type = "memory";
};
- mdio0: mdio-0 {
- status = "okay";
- compatible = "virtual,mdio-gpio";
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- switch0: switch@10 {
- compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
-
- dsa,member = <0 0>;
-
- pinctrl-0 = <&sw0_reset_pin>;
- pinctrl-names = "default";
-
- reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
- reg = <0x10>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0cpu: port@0 {
- reg = <0>;
- label = "cpu";
- ethernet = <&gmac0>;
- phy-mode = "rgmii-id";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port@1 {
- reg = <1>;
- label = "sw1";
- };
-
- port@2 {
- reg = <2>;
- label = "sw2";
- };
-
- port@3 {
- reg = <3>;
- label = "sw3";
- };
-
- port@4 {
- reg = <4>;
- label = "sw4";
- };
-
- port@5 {
- reg = <5>;
- label = "sw5";
- };
- };
- };
- };
-
mdio1: mdio-1 {
status = "okay";
compatible = "virtual,mdio-gpio";
@@ -222,6 +155,73 @@
status = "okay";
};
+&mdio0 {
+ status = "okay";
+ compatible = "virtual,mdio-gpio";
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+ <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ switch0: switch@10 {
+ compatible = "qca,qca8337";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsa,member = <0 0>;
+
+ pinctrl-0 = <&sw0_reset_pin>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ reg = <0x10>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0cpu: port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "sw1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "sw2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "sw3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "sw4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "sw5";
+ };
+ };
+ };
+};
+
&gmac0 {
status = "okay";
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -476,6 +476,20 @@
snps,blen = <16 0 0 0 0 0 0>;
};
+ mdio0: mdio@37000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qcom,ipq8064-mdio", "syscon";
+ reg = <0x37000000 0x200000>;
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";

235
target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch
View File

@ -1,235 +0,0 @@
From b044ae89862132a86fb511648e9c52ea3cdf8c30 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Wed, 5 Aug 2020 14:19:23 +0200
Subject: [PATCH 1/4] devfreq: qcom: Add L2 Krait Cache devfreq scaling driver
Qcom L2 Krait CPUs use the generic cpufreq-dt driver and doesn't actually
scale the Cache frequency when the CPU frequency is changed. This
devfreq driver register with the cpu notifier and scale the Cache
based on the max Freq across all core as the CPU cache is shared across
all of them. If provided this also scale the voltage of the regulator
attached to the CPU cache. The scaling logic is based on the CPU freq
and the 3 scaling interval are set by the device dts.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/devfreq/Kconfig | 11 ++
drivers/devfreq/Makefile | 1 +
drivers/devfreq/krait-cache-devfreq.c | 188 ++++++++++++++++++++++++++
3 files changed, 200 insertions(+)
create mode 100644 drivers/devfreq/krait-cache-devfreq.c
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -151,6 +151,17 @@ config ARM_SUN8I_A33_MBUS_DEVFREQ
This adds the DEVFREQ driver for the MBUS controller in some
Allwinner sun8i (A33 through H3) and sun50i (A64 and H5) SoCs.
+config ARM_KRAIT_CACHE_DEVFREQ
+ tristate "Scaling support for Krait CPU Cache Devfreq"
+ depends on ARCH_QCOM || COMPILE_TEST
+ select DEVFREQ_GOV_PASSIVE
+ help
+ This adds the DEVFREQ driver for the Krait CPU L2 Cache shared by all cores.
+
+ The driver register with the cpufreq notifier and find the right frequency
+ based on the max frequency across all core and the range set in the device
+ dts. If provided this scale also the regulator attached to the l2 cache.
+
source "drivers/devfreq/event/Kconfig"
endif # PM_DEVFREQ
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) +
obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o
obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o
obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o
+obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o
# DEVFREQ Event Drivers
obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/
--- /dev/null
+++ b/drivers/devfreq/krait-cache-devfreq.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/devfreq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_opp.h>
+
+#include "governor.h"
+
+struct krait_cache_data {
+ struct clk *clk;
+ unsigned long idle_freq;
+ int token;
+};
+
+static int krait_cache_config_clk(struct device *dev, struct opp_table *opp_table,
+ struct dev_pm_opp *old_opp, struct dev_pm_opp *opp,
+ void *data, bool scaling_down)
+{
+ struct krait_cache_data *kdata;
+ unsigned long old_freq, freq;
+ unsigned long idle_freq;
+ struct clk *clk;
+ int ret;
+
+ kdata = dev_get_drvdata(dev);
+ idle_freq = kdata->idle_freq;
+ clk = kdata->clk;
+
+ old_freq = dev_pm_opp_get_freq(old_opp);
+ freq = dev_pm_opp_get_freq(opp);
+
+ /*
+ * Set to idle bin if switching from normal to high bin
+ * or vice versa. It has been notice that a bug is triggered
+ * in cache scaling when more than one bin is scaled, to fix
+ * this we first need to transition to the base rate and then
+ * to target rate
+ */
+ if (likely(freq != idle_freq && old_freq != idle_freq)) {
+ ret = clk_set_rate(clk, idle_freq);
+ if (ret)
+ return ret;
+ }
+
+ return clk_set_rate(clk, freq);
+};
+
+static int krait_cache_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+ struct krait_cache_data *data = dev_get_drvdata(dev);
+
+ *freq = clk_get_rate(data->clk);
+
+ return 0;
+};
+
+static int krait_cache_target(struct device *dev, unsigned long *freq,
+ u32 flags)
+{
+ struct dev_pm_opp *opp;
+
+ opp = dev_pm_opp_find_freq_ceil(dev, freq);
+ if (unlikely(IS_ERR(opp)))
+ return PTR_ERR(opp);
+
+ dev_pm_opp_put(opp);
+
+ return dev_pm_opp_set_rate(dev, *freq);
+};
+
+static int krait_cache_get_dev_status(struct device *dev,
+ struct devfreq_dev_status *stat)
+{
+ struct krait_cache_data *data = dev_get_drvdata(dev);
+
+ stat->busy_time = 0;
+ stat->total_time = 0;
+ stat->current_frequency = clk_get_rate(data->clk);
+
+ return 0;
+};
+
+static struct devfreq_dev_profile krait_cache_devfreq_profile = {
+ .target = krait_cache_target,
+ .get_dev_status = krait_cache_get_dev_status,
+ .get_cur_freq = krait_cache_get_cur_freq
+};
+
+static struct devfreq_passive_data devfreq_gov_data = {
+ .parent_type = CPUFREQ_PARENT_DEV,
+};
+
+static int krait_cache_probe(struct platform_device *pdev)
+{
+ struct dev_pm_opp_config config = { };
+ struct device *dev = &pdev->dev;
+ struct krait_cache_data *data;
+ struct devfreq *devfreq;
+ struct dev_pm_opp *opp;
+ struct clk *clk;
+ int ret, token;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ clk = devm_clk_get(dev, "l2");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ config.regulator_names = (const char *[]){ "l2", NULL };
+ config.clk_names = (const char *[]){ "l2", NULL };
+ config.config_clks = krait_cache_config_clk;
+
+ token = dev_pm_opp_set_config(dev, &config);
+ if (token < 0)
+ return token;
+
+ ret = devm_pm_opp_of_add_table(dev);
+ if (ret)
+ goto free_opp;
+
+ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq);
+ if (IS_ERR(opp)) {
+ ret = PTR_ERR(opp);
+ goto free_opp;
+ }
+ dev_pm_opp_put(opp);
+
+ data->token = token;
+ data->clk = clk;
+ dev_set_drvdata(dev, data);
+ devfreq = devm_devfreq_add_device(dev, &krait_cache_devfreq_profile,
+ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data);
+ if (IS_ERR(devfreq)) {
+ ret = PTR_ERR(devfreq);
+ goto free_opp;
+ }
+
+ return 0;
+
+free_opp:
+ dev_pm_opp_clear_config(token);
+ return ret;
+};
+
+static int krait_cache_remove(struct platform_device *pdev)
+{
+ struct krait_cache_data *data = dev_get_drvdata(&pdev->dev);
+
+ dev_pm_opp_clear_config(data->token);
+
+ return 0;
+};
+
+static const struct of_device_id krait_cache_match_table[] = {
+ { .compatible = "qcom,krait-cache" },
+ {}
+};
+
+static struct platform_driver krait_cache_driver = {
+ .probe = krait_cache_probe,
+ .remove = krait_cache_remove,
+ .driver = {
+ .name = "krait-cache-scaling",
+ .of_match_table = krait_cache_match_table,
+ },
+};
+module_platform_driver(krait_cache_driver);
+
+MODULE_DESCRIPTION("Krait CPU Cache Scaling driver");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL v2");

50
target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch
View File

@ -1,50 +0,0 @@
From ef124ad0ff8abfbf4ebe3fe6d7dcef4541dec13a Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 16 Jun 2022 18:39:21 +0200
Subject: [PATCH] ARM: dts: qcom: add krait-cache compatible for ipq806x dtsi
Add qcom,krait-cache compatible to enable cache devfreq driver for
ipq806x SoC and move the L2 node to the soc node to make the devfreq
driver correctly probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -69,16 +69,6 @@
min-residency-us = <3000>;
};
};
-
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- qcom,saw = <&saw_l2>;
-
- clocks = <&kraitcc 4>;
- clock-names = "l2";
- operating-points-v2 = <&opp_table_l2>;
- };
};
opp_table_l2: opp_table_l2 {
@@ -1409,6 +1399,16 @@
#reset-cells = <1>;
};
+ L2: l2-cache {
+ compatible = "cache", "qcom,krait-cache";
+ cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+
+ clocks = <&kraitcc 4>;
+ clock-names = "l2";
+ operating-points-v2 = <&opp_table_l2>;
+ };
+
lpass@28100000 {
compatible = "qcom,lpass-cpu";
status = "disabled";

203
target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch
View File

@ -1,203 +0,0 @@
From 13f075999935bb696dbab63243923179f06fa05e Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 16 Jun 2022 19:56:08 +0200
Subject: [PATCH 3/4] devfreq: add ipq806x fabric scaling driver
Add ipq806x fabric scaling driver using the devfreq passive governor.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/devfreq/Kconfig | 11 ++
drivers/devfreq/Makefile | 1 +
drivers/devfreq/ipq806x-fab-devfreq.c | 155 ++++++++++++++++++++++++++
3 files changed, 167 insertions(+)
create mode 100644 drivers/devfreq/ipq806x-fab-devfreq.c
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -162,6 +162,17 @@ config ARM_KRAIT_CACHE_DEVFREQ
based on the max frequency across all core and the range set in the device
dts. If provided this scale also the regulator attached to the l2 cache.
+config ARM_IPQ806X_FAB_DEVFREQ
+ tristate "Scaling support for ipq806x Soc Fabric"
+ depends on ARCH_QCOM || COMPILE_TEST
+ select DEVFREQ_GOV_PASSIVE
+ help
+ This adds the DEVFREQ driver for the ipq806x Soc Fabric.
+
+ The driver register with the cpufreq notifier and find the right frequency
+ based on the max frequency across all core and the range set in the device
+ dts.
+
source "drivers/devfreq/event/Kconfig"
endif # PM_DEVFREQ
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) +=
obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o
obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o
obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o
+obj-$(CONFIG_ARM_IPQ806X_FAB_DEVFREQ) += ipq806x-fab-devfreq.o
# DEVFREQ Event Drivers
obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/
--- /dev/null
+++ b/drivers/devfreq/ipq806x-fab-devfreq.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/devfreq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/pm_opp.h>
+
+#include "governor.h"
+
+struct ipq806x_fab_data {
+ struct clk *fab_clk;
+ struct clk *ddr_clk;
+};
+
+static int ipq806x_fab_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+ struct ipq806x_fab_data *data = dev_get_drvdata(dev);
+
+ *freq = clk_get_rate(data->fab_clk);
+
+ return 0;
+};
+
+static int ipq806x_fab_target(struct device *dev, unsigned long *freq,
+ u32 flags)
+{
+ struct ipq806x_fab_data *data = dev_get_drvdata(dev);
+ struct dev_pm_opp *opp;
+ int ret;
+
+ opp = dev_pm_opp_find_freq_ceil(dev, freq);
+ if (unlikely(IS_ERR(opp)))
+ return PTR_ERR(opp);
+
+ dev_pm_opp_put(opp);
+
+ ret = clk_set_rate(data->fab_clk, *freq);
+ if (ret)
+ return ret;
+
+ return clk_set_rate(data->ddr_clk, *freq);
+};
+
+static int ipq806x_fab_get_dev_status(struct device *dev,
+ struct devfreq_dev_status *stat)
+{
+ struct ipq806x_fab_data *data = dev_get_drvdata(dev);
+
+ stat->busy_time = 0;
+ stat->total_time = 0;
+ stat->current_frequency = clk_get_rate(data->fab_clk);
+
+ return 0;
+};
+
+static struct devfreq_dev_profile ipq806x_fab_devfreq_profile = {
+ .target = ipq806x_fab_target,
+ .get_dev_status = ipq806x_fab_get_dev_status,
+ .get_cur_freq = ipq806x_fab_get_cur_freq
+};
+
+static struct devfreq_passive_data devfreq_gov_data = {
+ .parent_type = CPUFREQ_PARENT_DEV,
+};
+
+static int ipq806x_fab_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ipq806x_fab_data *data;
+ struct devfreq *devfreq;
+ struct clk *clk;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ clk = devm_clk_get(dev, "apps-fab-clk");
+ if (IS_ERR(clk)) {
+ dev_err_probe(dev, PTR_ERR(clk), "failed to get apps fab clk\n");
+ return PTR_ERR(clk);
+ }
+
+ clk_prepare_enable(clk);
+ data->fab_clk = clk;
+
+ clk = devm_clk_get(dev, "ddr-fab-clk");
+ if (IS_ERR(clk)) {
+ dev_err_probe(dev, PTR_ERR(clk), "failed to get ddr fab clk\n");
+ goto err_ddr;
+ }
+
+ clk_prepare_enable(clk);
+ data->ddr_clk = clk;
+
+ ret = dev_pm_opp_of_add_table(dev);
+ if (ret) {
+ dev_err(dev, "failed to parse fab freq thresholds\n");
+ return ret;
+ }
+
+ dev_set_drvdata(dev, data);
+
+ devfreq = devm_devfreq_add_device(&pdev->dev, &ipq806x_fab_devfreq_profile,
+ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data);
+ if (IS_ERR(devfreq))
+ dev_pm_opp_remove_table(dev);
+
+ return PTR_ERR_OR_ZERO(devfreq);
+
+err_ddr:
+ clk_unprepare(data->fab_clk);
+ clk_put(data->fab_clk);
+ return PTR_ERR(clk);
+};
+
+static int ipq806x_fab_remove(struct platform_device *pdev)
+{
+ struct ipq806x_fab_data *data = dev_get_drvdata(&pdev->dev);
+
+ clk_unprepare(data->fab_clk);
+ clk_put(data->fab_clk);
+
+ clk_unprepare(data->ddr_clk);
+ clk_put(data->ddr_clk);
+
+ dev_pm_opp_remove_table(&pdev->dev);
+
+ return 0;
+};
+
+static const struct of_device_id ipq806x_fab_match_table[] = {
+ { .compatible = "qcom,fab-scaling" },
+ {}
+};
+
+static struct platform_driver ipq806x_fab_driver = {
+ .probe = ipq806x_fab_probe,
+ .remove = ipq806x_fab_remove,
+ .driver = {
+ .name = "ipq806x-fab-scaling",
+ .of_match_table = ipq806x_fab_match_table,
+ },
+};
+module_platform_driver(ipq806x_fab_driver);
+
+MODULE_DESCRIPTION("ipq806x Fab Scaling driver");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL v2");

48
target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch
View File

@ -1,48 +0,0 @@
From c3573f0907dadb0a6e9933aae2a46a489abcbd48 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 16 Jun 2022 20:03:05 +0200
Subject: [PATCH 4/4] ARM: dts: qcom: add fab scaling node for ipq806x
Add fabric scaling node for ipq806x to correctly scale apps and ddr
fabric clk.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -170,6 +170,18 @@
};
};
+ opp_table_fab: opp_table_fab {
+ compatible = "operating-points-v2";
+
+ opp-533000000 {
+ opp-hz = /bits/ 64 <533000000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ };
+
thermal-zones {
sensor0-thermal {
polling-delay-passive = <0>;
@@ -1409,6 +1421,13 @@
operating-points-v2 = <&opp_table_l2>;
};
+ fab-scaling {
+ compatible = "qcom,fab-scaling";
+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
+ clock-names = "apps-fab-clk", "ddr-fab-clk";
+ operating-points-v2 = <&opp_table_fab>;
+ };
+
lpass@28100000 {
compatible = "qcom,lpass-cpu";
status = "disabled";

47
target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch
View File

@ -1,47 +0,0 @@
From 666c1b745e93ccddde841d5057c33f97b29a316a Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 15 Sep 2022 02:19:28 +0200
Subject: [PATCH 3/9] clk: qcom: krait-cc: handle qsb clock defined in DTS
qsb fixed clk may be defined in DTS and correctly passed in the clocks
list. Add related code to handle this and modify the logic to
dynamically read qsb clock frequency.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/clk/qcom/krait-cc.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -348,7 +348,7 @@ static int krait_cc_probe(struct platfor
{
struct device *dev = &pdev->dev;
const struct of_device_id *id;
- unsigned long cur_rate, aux_rate;
+ unsigned long cur_rate, aux_rate, qsb_rate;
int cpu;
struct clk_hw *mux, *l2_pri_mux;
struct clk *clk, **clks;
@@ -357,11 +357,19 @@ static int krait_cc_probe(struct platfor
if (!id)
return -ENODEV;
- /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */
- clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1);
+ /*
+ * Per Documentation qsb should be provided from DTS.
+ * To address old implementation, register the fixed clock anyway.
+ * Rate is 1 because 0 causes problems for __clk_mux_determine_rate
+ */
+ clk = clk_get(dev, "qsb");
+ if (IS_ERR(clk))
+ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1);
if (IS_ERR(clk))
return PTR_ERR(clk);
+ qsb_rate = clk_get_rate(clk);
+
if (!id->data) {
clk = clk_register_fixed_factor(dev, "acpu_aux",
"gpll0_vote", 0, 1, 2);

36
target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch
View File

@ -1,36 +0,0 @@
From fca6f185a9d9ef0892a719bc6da955b22d326ec7 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 15 Sep 2022 02:24:33 +0200
Subject: [PATCH 4/9] clk: qcom: krait-cc: register REAL qsb fixed clock
With some tools it was discovered the real frequency of the qsb fixed
clock. While not 100% correct it's still better than using 1 as a dummy
frequency.
Correctly register the qsb fixed clock with the frequency of 225 MHz
instead of 1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/clk/qcom/krait-cc.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -25,6 +25,8 @@ enum {
clks_max,
};
+#define QSB_RATE 2250000000
+
static unsigned int sec_mux_map[] = {
2,
0,
@@ -364,7 +366,7 @@ static int krait_cc_probe(struct platfor
*/
clk = clk_get(dev, "qsb");
if (IS_ERR(clk))
- clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1);
+ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, QSB_RATE);
if (IS_ERR(clk))
return PTR_ERR(clk);

44
target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch
View File

@ -1,44 +0,0 @@
From 2399d181557d94ae9a2686926cd25768f132e4b4 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Fri, 18 Mar 2022 16:12:14 +0100
Subject: [PATCH 7/9] clk: qcom: krait-cc: drop pr_info and use dev_info
Replace pr_info() with dev_info() to provide better diagnostics.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/clk/qcom/krait-cc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -423,25 +423,25 @@ static int krait_cc_probe(struct platfor
cur_rate = clk_get_rate(clks[l2_mux]);
aux_rate = 384000000;
if (cur_rate < aux_rate) {
- pr_info("L2 @ Undefined rate. Forcing new rate.\n");
+ dev_info(dev, "L2 @ Undefined rate. Forcing new rate.\n");
cur_rate = aux_rate;
}
clk_set_rate(clks[l2_mux], aux_rate);
clk_set_rate(clks[l2_mux], 2);
clk_set_rate(clks[l2_mux], cur_rate);
- pr_info("L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000);
+ dev_info(dev, "L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000);
for_each_possible_cpu(cpu) {
clk = clks[cpu];
cur_rate = clk_get_rate(clk);
if (cur_rate < aux_rate) {
- pr_info("CPU%d @ Undefined rate. Forcing new rate.\n", cpu);
+ dev_info(dev, "CPU%d @ Undefined rate. Forcing new rate.\n", cpu);
cur_rate = aux_rate;
}
clk_set_rate(clk, aux_rate);
clk_set_rate(clk, 2);
clk_set_rate(clk, cur_rate);
- pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
+ dev_info(dev, "CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
}
of_clk_add_provider(dev->of_node, krait_of_get, clks);

88
target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch
View File

@ -1,88 +0,0 @@
From 6a77cf3f5f95ec0058e1b4d1ada018748cb0b83b Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 15 Sep 2022 03:33:13 +0200
Subject: [PATCH 9/9] clk: qcom: krait-cc: rework mux reset logic and reset
hfpll
Rework and clean mux reset logic.
Compact it to a for loop to handle both CPU and L2 in one place.
Move hardcoded aux_rate to define and add a new hfpll_rate value to
reset hfpll settings.
Change logic to now reset the hfpll to the lowest value of 600 Mhz and
then restoring the previous frequency. This permits to reset the hfpll if
the primary mux was set to source out of the secondary mux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/clk/qcom/krait-cc.c | 50 +++++++++++++++++--------------------
1 file changed, 23 insertions(+), 27 deletions(-)
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -25,7 +25,9 @@ enum {
clks_max,
};
-#define QSB_RATE 2250000000
+#define QSB_RATE 225000000
+#define AUX_RATE 384000000
+#define HFPLL_RATE 600000000
static unsigned int sec_mux_map[] = {
2,
@@ -350,7 +352,7 @@ static int krait_cc_probe(struct platfor
{
struct device *dev = &pdev->dev;
const struct of_device_id *id;
- unsigned long cur_rate, aux_rate, qsb_rate;
+ unsigned long cur_rate, qsb_rate;
int cpu;
struct clk_hw *mux, *l2_pri_mux;
struct clk *clk, **clks;
@@ -420,28 +422,29 @@ static int krait_cc_probe(struct platfor
* two different rates to force a HFPLL reinit under all
* circumstances.
*/
- cur_rate = clk_get_rate(clks[l2_mux]);
- aux_rate = 384000000;
- if (cur_rate < aux_rate) {
- dev_info(dev, "L2 @ Undefined rate. Forcing new rate.\n");
- cur_rate = aux_rate;
- }
- clk_set_rate(clks[l2_mux], aux_rate);
- clk_set_rate(clks[l2_mux], 2);
- clk_set_rate(clks[l2_mux], cur_rate);
- dev_info(dev, "L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000);
- for_each_possible_cpu(cpu) {
+ for (cpu = 0; cpu < 5; cpu++) {
+ const char *l2_s = "L2";
+ char cpu_s[5];
+
clk = clks[cpu];
+ if (!clk)
+ continue;
+
+ if (cpu < 4)
+ snprintf(cpu_s, 5, "CPU%d", cpu);
+
cur_rate = clk_get_rate(clk);
- if (cur_rate < aux_rate) {
- dev_info(dev, "CPU%d @ Undefined rate. Forcing new rate.\n", cpu);
- cur_rate = aux_rate;
+ if (cur_rate < AUX_RATE) {
+ dev_info(dev, "%s @ Undefined rate. Forcing new rate.\n",
+ cpu < 4 ? cpu_s : l2_s);
+ cur_rate = AUX_RATE;
}
- clk_set_rate(clk, aux_rate);
- clk_set_rate(clk, 2);
+ clk_set_rate(clk, AUX_RATE);
+ clk_set_rate(clk, HFPLL_RATE);
clk_set_rate(clk, cur_rate);
- dev_info(dev, "CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
+ dev_info(dev, "%s @ %lu KHz\n", cpu < 4 ? cpu_s : l2_s,
+ clk_get_rate(clk) / 1000);
}
of_clk_add_provider(dev->of_node, krait_of_get, clks);

156
target/linux/ipq806x/patches-6.1/122-05-clk-qcom-clk-krait-generilize-div-functions.patch
View File

@ -1,156 +0,0 @@
From 908c361b3c3a139eb3e6a798cb620a6da7514d5c Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Fri, 23 Sep 2022 19:05:39 +0200
Subject: [PATCH 2/4] clk: qcom: clk-krait: generilize div functions
Generilize div functions and remove hardcode to a divisor of 2.
This is just a cleanup and permit to make it more clear the settings of
the devisor when used by the krait-cc driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/clk/qcom/clk-krait.c | 57 ++++++++++++++++++++----------------
drivers/clk/qcom/clk-krait.h | 11 ++++---
drivers/clk/qcom/krait-cc.c | 7 +++--
3 files changed, 42 insertions(+), 33 deletions(-)
--- a/drivers/clk/qcom/clk-krait.c
+++ b/drivers/clk/qcom/clk-krait.c
@@ -97,53 +97,58 @@ const struct clk_ops krait_mux_clk_ops =
EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */
-static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
+static long krait_div_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
- *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2);
- return DIV_ROUND_UP(*parent_rate, 2);
+ struct krait_div_clk *d = to_krait_div_clk(hw);
+
+ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
+ rate * d->divisor);
+
+ return DIV_ROUND_UP(*parent_rate, d->divisor);
}
-static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
+static int krait_div_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
- struct krait_div2_clk *d = to_krait_div2_clk(hw);
+ struct krait_div_clk *d = to_krait_div_clk(hw);
+ u8 div_val = krait_div_to_val(d->divisor);
unsigned long flags;
- u32 val;
- u32 mask = BIT(d->width) - 1;
-
- if (d->lpl)
- mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift;
- else
- mask <<= d->shift;
+ u32 regval;
spin_lock_irqsave(&krait_clock_reg_lock, flags);
- val = krait_get_l2_indirect_reg(d->offset);
- val &= ~mask;
- krait_set_l2_indirect_reg(d->offset, val);
+ regval = krait_get_l2_indirect_reg(d->offset);
+
+ regval &= ~(d->mask << d->shift);
+ regval |= (div_val & d->mask) << d->shift;
+
+ if (d->lpl) {
+ regval &= ~(d->mask << (d->shift + LPL_SHIFT));
+ regval |= (div_val & d->mask) << (d->shift + LPL_SHIFT);
+ }
+
+ krait_set_l2_indirect_reg(d->offset, regval);
spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
return 0;
}
static unsigned long
-krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+krait_div_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
- struct krait_div2_clk *d = to_krait_div2_clk(hw);
- u32 mask = BIT(d->width) - 1;
+ struct krait_div_clk *d = to_krait_div_clk(hw);
u32 div;
div = krait_get_l2_indirect_reg(d->offset);
div >>= d->shift;
- div &= mask;
- div = (div + 1) * 2;
+ div &= d->mask;
- return DIV_ROUND_UP(parent_rate, div);
+ return DIV_ROUND_UP(parent_rate, krait_val_to_div(div));
}
-const struct clk_ops krait_div2_clk_ops = {
- .round_rate = krait_div2_round_rate,
- .set_rate = krait_div2_set_rate,
- .recalc_rate = krait_div2_recalc_rate,
+const struct clk_ops krait_div_clk_ops = {
+ .round_rate = krait_div_round_rate,
+ .set_rate = krait_div_set_rate,
+ .recalc_rate = krait_div_recalc_rate,
};
-EXPORT_SYMBOL_GPL(krait_div2_clk_ops);
+EXPORT_SYMBOL_GPL(krait_div_clk_ops);
--- a/drivers/clk/qcom/clk-krait.h
+++ b/drivers/clk/qcom/clk-krait.h
@@ -25,17 +25,20 @@ struct krait_mux_clk {
extern const struct clk_ops krait_mux_clk_ops;
-struct krait_div2_clk {
+struct krait_div_clk {
u32 offset;
- u8 width;
+ u32 mask;
+ u8 divisor;
u32 shift;
bool lpl;
struct clk_hw hw;
};
-#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw)
+#define to_krait_div_clk(_hw) container_of(_hw, struct krait_div_clk, hw)
+#define krait_div_to_val(_div) ((_div) / 2) - 1
+#define krait_val_to_div(_val) ((_val) + 1) * 2
-extern const struct clk_ops krait_div2_clk_ops;
+extern const struct clk_ops krait_div_clk_ops;
#endif
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -86,11 +86,11 @@ static int krait_notifier_register(struc
static struct clk_hw *
krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
{
- struct krait_div2_clk *div;
+ struct krait_div_clk *div;
static struct clk_parent_data p_data[1];
struct clk_init_data init = {
.num_parents = ARRAY_SIZE(p_data),
- .ops = &krait_div2_clk_ops,
+ .ops = &krait_div_clk_ops,
.flags = CLK_SET_RATE_PARENT,
};
struct clk_hw *clk;
@@ -101,7 +101,8 @@ krait_add_div(struct device *dev, int id
if (!div)
return ERR_PTR(-ENOMEM);
- div->width = 2;
+ div->mask = 0x3;
+ div->divisor = 2;
div->shift = 6;
div->lpl = id >= 0;
div->offset = offset;

31
target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch
View File

@ -1,31 +0,0 @@
From ac84ac819a2e8fd3d87122b452c502a386c54437 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Tue, 5 Jul 2022 18:30:18 +0200
Subject: [PATCH v2 4/4] clk: qcom: gcc-ipq806x: remove cc_register_board for
pxo and cxo
Now that these clock are defined as fixed clk in dts, we can drop the
register_board_clk for cxo_board and pxo_board in gcc_ipq806x_probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/clk/qcom/gcc-ipq806x.c | 8 --------
1 file changed, 8 deletions(-)
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -3386,14 +3386,6 @@ static int gcc_ipq806x_probe(struct plat
struct regmap *regmap;
int ret;
- ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000);
- if (ret)
- return ret;
-
- ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000);
- if (ret)
- return ret;
-
if (of_machine_is_compatible("qcom,ipq8065")) {
ubi32_core1_src_clk.freq_tbl = clk_tbl_nss_ipq8065;
ubi32_core2_src_clk.freq_tbl = clk_tbl_nss_ipq8065;

121
target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch
View File

@ -1,121 +0,0 @@
From: Christian Lamparter <chunkeey@googlemail.com>
Subject: SoC: add qualcomm syscon
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
obj-$(CONFIG_QCOM_SPM) += spm.o
obj-$(CONFIG_QCOM_STATS) += qcom_stats.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
obj-$(CONFIG_QCOM_APR) += apr.o
obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -213,6 +213,13 @@ config QCOM_STATS
various SoC level low power modes statistics and export to debugfs
interface.
+config QCOM_TCSR
+ tristate "QCOM Top Control and Status Registers"
+ depends on ARCH_QCOM
+ help
+ Say y here to enable TCSR support. The TCSR provides control
+ functions for various peripherals.
+
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM || COMPILE_TEST
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License rev 2 and
+ * only rev 2 as published by the free Software foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define TCSR_USB_PORT_SEL 0xb0
+
+static int tcsr_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct device_node *node = pdev->dev.of_node;
+ void __iomem *base;
+ u32 val;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
+ dev_err(&pdev->dev, "setting usb port select = %d\n", val);
+ writel(val, base + TCSR_USB_PORT_SEL);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id tcsr_dt_match[] = {
+ { .compatible = "qcom,tcsr", },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
+
+static struct platform_driver tcsr_driver = {
+ .driver = {
+ .name = "tcsr",
+ .owner = THIS_MODULE,
+ .of_match_table = tcsr_dt_match,
+ },
+ .probe = tcsr_probe,
+};
+
+module_platform_driver(tcsr_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM TCSR driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,tcsr.h
@@ -0,0 +1,23 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_QCOM_TCSR_H
+#define __DT_BINDINGS_QCOM_TCSR_H
+
+#define TCSR_USB_SELECT_USB3_P0 0x1
+#define TCSR_USB_SELECT_USB3_P1 0x2
+#define TCSR_USB_SELECT_USB3_DUAL 0x3
+
+/* TCSR A/B REG */
+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0
+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1
+
+#endif

37
target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch
View File

@ -1,37 +0,0 @@
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1589,6 +1589,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
endchoice
+config CMDLINE_OVERRIDE
+ bool "Use alternative cmdline from device tree"
+ help
+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
+ be used, this is not a good option for kernels that are shared across
+ devices. This setting enables using "chosen/cmdline-override" as the
+ cmdline if it exists in the device tree.
+
config CMDLINE
string "Default kernel command string"
default ""
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1187,6 +1187,17 @@ int __init early_init_dt_scan_chosen(cha
if (p != NULL && l > 0)
strlcat(cmdline, p, min_t(int, strlen(cmdline) + (int)l, COMMAND_LINE_SIZE));
+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
+ * device tree option of chosen/bootargs-override. This is
+ * helpful on boards where u-boot sets bootargs, and is unable
+ * to be modified.
+ */
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
+ if (p != NULL && l > 0)
+ strlcpy(cmdline, p, min((int)l, COMMAND_LINE_SIZE));
+#endif
+
handle_cmdline:
/*
* CONFIG_CMDLINE is meant to be a default in case nothing else

75
target/linux/ipq806x/patches-6.1/901-01-ARM-decompressor-support-memory-start-validation-.patch
View File

@ -1,75 +0,0 @@
From 2f86b9b71a11f86e3d850214ab781ebb17d7260e Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Fri, 19 Jan 2024 19:48:30 +0100
Subject: [PATCH v2 1/2] ARM: decompressor: support memory start validation for
appended DTB
There is currently a problem with a very specific sets of kernel config
and AUTO_ZRELADDR.
For the most common case AUTO_ZRELADDR check the PC register and
calculate the start of the physical memory. Then fdt_check_mem_start is
called to make sure the detected value makes sense by comparing it with
what is present in DTB in the memory nodes and if additional fixup are
required with the use of linux,usable-memory-range in the chosen node to
hardcode usable memory range in case some reserved space needs to be
addressed. With the help of this function the right address is
calculated and the kernel correctly decompress and loads.
Things starts to become problematic when in the mix,
CONFIG_ARM_APPENDED_DTB is used. This is a particular kernel config is
used when legacy systems doesn't support passing a DTB directly and a
DTB is appended at the end of the image.
In such case, fdt_check_mem_start is skipped in AUTO_ZRELADDR iteration
as the appended DTB can be augumented later with ATAGS passed from the
bootloader (if CONFIG_ARM_ATAG_DTB_COMPAT is enabled).
The main problem and what this patch address is the fact that
fdt_check_mem_start is never called later when the appended DTB is
augumented, hence any fixup and validation is not done making AUTO_ZRELADDR
detection inconsistent and most of the time wrong.
Add support in head.S for this by checking if AUTO_ZRELADDR is enabled
and calling fdt_check_mem_start with the appended DTB and the augumented
values permitting legacy device to provide info in DTB instead of
disabling AUTO_ZRELADDR and hardcoding the physical address offsets.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/compressed/head.S | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -443,6 +443,28 @@ restart: adr r0, LC1
add r6, r6, r5
add r10, r10, r5
add sp, sp, r5
+
+#ifdef CONFIG_AUTO_ZRELADDR
+ /*
+ * Validate calculated start of physical memory with appended DTB.
+ * In the first iteration for physical memory start calculation,
+ * we skipped validating it as it could have been augumented by
+ * ATAGS stored at an offset from the same start of physical memory.
+ *
+ * We now have parsed them and augumented the appended DTB if asked
+ * so we can finally validate the start of physical memory.
+ *
+ * This is needed to apply additional fixup with
+ * linux,usable-memory-range or to make sure AUTO_ZRELADDR detected
+ * the correct value.
+ */
+ sub r0, r4, #TEXT_OFFSET @ revert to base address
+ mov r1, r8 @ use appended DTB
+ bl fdt_check_mem_start
+
+ /* Determine final kernel image address. */
+ add r4, r0, #TEXT_OFFSET
+#endif
dtb_check_done:
#endif

54
target/linux/ipq806x/patches-6.1/901-02-ARM-decompressor-add-option-to-ignore-MEM-ATAGs.patch
View File

@ -1,54 +0,0 @@
From 781d7cd4c3364e9d38fa12a342c5ad4c7e33a5ba Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Fri, 19 Jan 2024 20:33:10 +0100
Subject: [PATCH v2 2/2] ARM: decompressor: add option to ignore MEM ATAGs
Some bootloaders can pass broken MEM ATAGs that provide hardcoded
information about mounted RAM size and physical location.
Example booloader provide RAM of size 1.7Gb but actual mounted RAM
size is 512Mb causing kernel panic.
Add option CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM to ignore these ATAG
and not augument appended DTB memory node.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/Kconfig | 12 ++++++++++++
arch/arm/boot/compressed/atags_to_fdt.c | 4 ++++
2 files changed, 16 insertions(+)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1570,6 +1570,18 @@ config ARM_ATAG_DTB_COMPAT
bootloaders, this option allows zImage to extract the information
from the ATAG list and store it at run time into the appended DTB.
+config ARM_ATAG_DTB_COMPAT_IGNORE_MEM
+ bool "Ignore MEM ATAG information from bootloader"
+ depends on ARM_ATAG_DTB_COMPAT
+ help
+ Some bootloaders can pass broken MEM ATAGs that provide hardcoded
+ information about mounted RAM size and physical location.
+ Example booloader provide RAM of size 1.7Gb but actual mounted RAM
+ size is 512Mb causing kernel panic.
+
+ Enable this option if MEM ATAGs should be ignored and the memory
+ node in the appended DTB should NOT be augumented.
+
choice
prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -169,6 +169,10 @@ int atags_to_fdt(void *atag_list, void *
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
} else if (atag->hdr.tag == ATAG_MEM) {
+ /* Bootloader MEM ATAG are broken and should be ignored */
+ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM))
+ continue;
+
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)

197
target/linux/ipq806x/patches-6.1/902-ARM-decompressor-support-for-ATAGs-rootblock-parsing.patch
View File

@ -1,197 +0,0 @@
From 13bb6d8dd9138927950a520a288401db82871dc9 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Sun, 21 Jan 2024 23:36:57 +0100
Subject: [PATCH] ARM: decompressor: support for ATAGs rootblock parsing
The command-line arguments provided by the boot loader will be
appended to a new device tree property: bootloader-args.
If there is a property "append-rootblock" in DT under /chosen
and a root= option in bootloaders command line it will be parsed
and added to DT bootargs with the form: <append-rootblock>XX.
This is usefull in dual boot systems, to get the current root partition
without afecting the rest of the system.
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
[ reworked to a cleaner patch ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
arch/arm/Kconfig | 10 +++
arch/arm/boot/compressed/atags_to_fdt.c | 102 ++++++++++++++++++++++--
init/main.c | 12 +++
3 files changed, 117 insertions(+), 7 deletions(-)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1599,6 +1599,16 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ bool "Append rootblock parsing bootloader's kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to a new device tree property: bootloader-args.
+
+ If there is a property "append-rootblock" in DT under /chosen
+ and a root= option in bootloaders command line it will be parsed
+ and added to DT bootargs with the form: <append-rootblock>XX.
+
endchoice
config CMDLINE_OVERRIDE
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -3,7 +3,8 @@
#include <asm/setup.h>
#include <libfdt.h>
-#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) || \
+ defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
#define do_extend_cmdline 1
#else
#define do_extend_cmdline 0
@@ -69,6 +70,83 @@ static uint32_t get_cell_size(const void
return cell_size;
}
+/**
+ * taken from arch/x86/boot/string.c
+ * local_strstr - Find the first substring in a %NUL terminated string
+ * @s1: The string to be searched
+ * @s2: The string to search for
+ */
+static char *local_strstr(const char *s1, const char *s2)
+{
+ size_t l1, l2;
+
+ l2 = strlen(s2);
+ if (!l2)
+ return (char *)s1;
+ l1 = strlen(s1);
+ while (l1 >= l2) {
+ l1--;
+ if (!memcmp(s1, s2, l2))
+ return (char *)s1;
+ s1++;
+ }
+ return NULL;
+}
+
+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
+{
+ char *ptr, *end, *tmp;
+ const char *root="root=";
+ const char *find_rootblock;
+ int i, l;
+ const char *rootblock;
+
+ find_rootblock = getprop(fdt, "/chosen", "find-rootblock", &l);
+ if (!find_rootblock)
+ find_rootblock = root;
+
+ /* ARM doesn't have __HAVE_ARCH_STRSTR, so it was copied from x86 */
+ ptr = local_strstr(str, find_rootblock);
+ if (!ptr)
+ return dest;
+
+ end = strchr(ptr, ' ');
+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
+
+ /* Some boards ubi.mtd=XX,ZZZZ, so let's check for '," too. */
+ tmp = strchr(ptr, ',');
+ if (tmp)
+ end = end < tmp ? end : tmp - 1;
+
+ /*
+ * find partition number
+ * (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX | ubi.mtd=XX,ZZZZ )
+ */
+ for (i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
+
+ ptr = end + 1;
+
+ /* if append-rootblock property is set use it to append to command line */
+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
+ if (rootblock != NULL) {
+ if (*dest != ' ') {
+ *dest = ' ';
+ dest++;
+ len++;
+ }
+
+ if (len + l + i <= COMMAND_LINE_SIZE) {
+ memcpy(dest, rootblock, l);
+ dest += l - 1;
+
+ memcpy(dest, ptr, i);
+ dest += i;
+ }
+ }
+
+ return dest;
+}
+
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
@@ -86,13 +164,23 @@ static void merge_fdt_bootargs(void *fdt
ptr += len - 1;
}
- /* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
+ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)) {
+ /*
+ * save original bootloader args
+ * and append ubi.mtd with root partition number
+ * to current cmdline
+ */
+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
+ } else {
+ /* and append the ATAG_CMDLINE */
+ len = strlen(fdt_cmdline);
+ if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
+ *ptr++ = ' ';
+ memcpy(ptr, fdt_cmdline, len);
+ ptr += len;
+ }
}
}
*ptr = '\0';
--- a/init/main.c
+++ b/init/main.c
@@ -28,6 +28,7 @@
#include <linux/initrd.h>
#include <linux/memblock.h>
#include <linux/acpi.h>
+#include <linux/of.h>
#include <linux/bootconfig.h>
#include <linux/console.h>
#include <linux/nmi.h>
@@ -996,6 +997,17 @@ asmlinkage __visible void __init __no_sa
pr_notice("Kernel command line: %s\n", saved_command_line);
/* parameters may set static keys */
jump_label_init();
+
+ /* Show bootloader's original command line for reference */
+ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) && of_chosen) {
+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
+
+ if(prop)
+ pr_notice("Bootloader command line (ignored): %s\n", prop);
+ else
+ pr_notice("Bootloader command line not present\n");
+ }
+
parse_early_param();
after_dashes = parse_args("Booting kernel",
static_command_line, __start___param,