mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-11-03 22:44:27 -05:00
uboot-sifiveu: add bootloader package for SiFive Ux40 boards
Add new package for building bootloader for the SiFive U-series boards. Supported boards at this stage are the HiFive Unleashed and HiFive Unmatched. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
This commit is contained in:
Zoltan HERPAI
parent
18238c4428
commit
91406797f9
63
package/boot/uboot-sifiveu/Makefile
Normal file
63
package/boot/uboot-sifiveu/Makefile
Normal file
@ -0,0 +1,63 @@
|
|||||||
|
# SPDX-License-Identifier: GPL-2.0-only
|
||||||
|
#
|
||||||
|
# Copyright (C) 2022 OpenWrt.org
|
||||||
|
#
|
||||||
|
|
||||||
|
include $(TOPDIR)/rules.mk
|
||||||
|
include $(INCLUDE_DIR)/kernel.mk
|
||||||
|
|
||||||
|
PKG_RELEASE:=1
|
||||||
|
PKG_VERSION:=2022.10
|
||||||
|
PKG_HASH:=50b4482a505bc281ba8470c399a3c26e145e29b23500bc35c50debd7fa46bdf8
|
||||||
|
|
||||||
|
include $(INCLUDE_DIR)/u-boot.mk
|
||||||
|
include $(INCLUDE_DIR)/package.mk
|
||||||
|
|
||||||
|
define U-Boot/Default
|
||||||
|
BUILD_TARGET:=sifiveu
|
||||||
|
BUILD_DEVICES=$(1)
|
||||||
|
UBOOT_IMAGE:=u-boot.itb
|
||||||
|
DTS_DIR:=arch/riscv/dts
|
||||||
|
UENV:=default
|
||||||
|
DEFAULT:=y
|
||||||
|
endef
|
||||||
|
|
||||||
|
define U-Boot/sifive_unleashed
|
||||||
|
NAME:=SiFive Unleashed
|
||||||
|
OPENSBI:=generic
|
||||||
|
DEPENDS:=+opensbi_generic
|
||||||
|
UBOOT_DTS:=hifive-unleashed-a00.dtb
|
||||||
|
BUILD_DEVICES:=sifive_unleashed
|
||||||
|
endef
|
||||||
|
|
||||||
|
define U-Boot/sifive_unmatched
|
||||||
|
NAME:=SiFive Unmatched
|
||||||
|
OPENSBI:=generic
|
||||||
|
DEPENDS:=+opensbi_generic
|
||||||
|
UBOOT_DTS:=hifive-unmatched-a00.dtb
|
||||||
|
BUILD_DEVICES:=sifive_unmatched
|
||||||
|
endef
|
||||||
|
|
||||||
|
UBOOT_TARGETS := \
|
||||||
|
sifive_unleashed \
|
||||||
|
sifive_unmatched
|
||||||
|
|
||||||
|
UBOOT_MAKE_FLAGS += \
|
||||||
|
OPENSBI=$(STAGING_DIR_IMAGE)/fw_dynamic-${OPENSBI}.bin
|
||||||
|
|
||||||
|
define Build/Configure
|
||||||
|
$(call Build/Configure/U-Boot)
|
||||||
|
sed -i 's/CONFIG_TOOLS_LIBCRYPTO=y/# CONFIG_TOOLS_LIBCRYPTO is not set/' $(PKG_BUILD_DIR)/.config
|
||||||
|
endef
|
||||||
|
|
||||||
|
define Build/InstallDev
|
||||||
|
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
|
||||||
|
$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)
|
||||||
|
$(INSTALL_BIN) $(PKG_BUILD_DIR)/spl/u-boot-spl.bin $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)-spl
|
||||||
|
$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(DTS_DIR)/$(UBOOT_DTS) $(STAGING_DIR_IMAGE)/$(UBOOT_DTS)
|
||||||
|
|
||||||
|
mkimage -C none -A arm -T script -d uEnv-$(UENV).txt \
|
||||||
|
$(STAGING_DIR_IMAGE)/$(BUILD_DEVICES)-boot.scr
|
||||||
|
endef
|
||||||
|
|
||||||
|
$(eval $(call BuildPackage/U-Boot))
|
||||||
@ -0,0 +1,104 @@
|
|||||||
|
From 725595e667cc4423347c255da8ca4c5b3aa0980a Mon Sep 17 00:00:00 2001
|
||||||
|
From: Vincent Chen <vincent.chen@sifive.com>
|
||||||
|
Date: Mon, 15 Nov 2021 03:31:04 -0800
|
||||||
|
Subject: [PATCH 2/8] board: sifive: spl: Initialized the PWM setting in the
|
||||||
|
SPL stage
|
||||||
|
|
||||||
|
LEDs and multiple fans can be controlled by SPL. This patch ensures
|
||||||
|
that all fans have been enabled in the SPL stage. In addition, the
|
||||||
|
LED's color will be set to yellow.
|
||||||
|
---
|
||||||
|
board/sifive/unmatched/Makefile | 1 +
|
||||||
|
board/sifive/unmatched/pwm.c | 57 +++++++++++++++++++++++++++++++++
|
||||||
|
board/sifive/unmatched/spl.c | 2 ++
|
||||||
|
3 files changed, 60 insertions(+)
|
||||||
|
create mode 100644 board/sifive/unmatched/pwm.c
|
||||||
|
|
||||||
|
diff --git a/board/sifive/unmatched/Makefile b/board/sifive/unmatched/Makefile
|
||||||
|
index 1345330089..5df01982e9 100644
|
||||||
|
--- a/board/sifive/unmatched/Makefile
|
||||||
|
+++ b/board/sifive/unmatched/Makefile
|
||||||
|
@@ -9,3 +9,4 @@ obj-y += spl.o
|
||||||
|
else
|
||||||
|
obj-y += unmatched.o
|
||||||
|
endif
|
||||||
|
+obj-y += pwm.o
|
||||||
|
diff --git a/board/sifive/unmatched/pwm.c b/board/sifive/unmatched/pwm.c
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000..e1cc02310a
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/board/sifive/unmatched/pwm.c
|
||||||
|
@@ -0,0 +1,57 @@
|
||||||
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
+/*
|
||||||
|
+ * Copyright (c) 2021, SiFive Inc
|
||||||
|
+ *
|
||||||
|
+ * Authors:
|
||||||
|
+ * Vincent Chen <vincent.chen@sifive.com>
|
||||||
|
+ * David Abdurachmanov <david.abdurachmanov@sifive.com>
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/io.h>
|
||||||
|
+#include <asm/arch/eeprom.h>
|
||||||
|
+
|
||||||
|
+struct pwm_sifive_regs {
|
||||||
|
+ unsigned int cfg; /* PWM configuration register */
|
||||||
|
+ unsigned int pad0; /* Reserved */
|
||||||
|
+ unsigned int cnt; /* PWM count register */
|
||||||
|
+ unsigned int pad1; /* Reserved */
|
||||||
|
+ unsigned int pwms; /* Scaled PWM count register */
|
||||||
|
+ unsigned int pad2; /* Reserved */
|
||||||
|
+ unsigned int pad3; /* Reserved */
|
||||||
|
+ unsigned int pad4; /* Reserved */
|
||||||
|
+ unsigned int cmp0; /* PWM 0 compare register */
|
||||||
|
+ unsigned int cmp1; /* PWM 1 compare register */
|
||||||
|
+ unsigned int cmp2; /* PWM 2 compare register */
|
||||||
|
+ unsigned int cmp3; /* PWM 3 compare register */
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+#define PWM0_BASE 0x10020000
|
||||||
|
+#define PWM1_BASE 0x10021000
|
||||||
|
+#define PWM_CFG_INIT 0x1000
|
||||||
|
+#define PWM_CMP_ENABLE_VAL 0x0
|
||||||
|
+#define PWM_CMP_DISABLE_VAL 0xffff
|
||||||
|
+
|
||||||
|
+void pwm_device_init(void)
|
||||||
|
+{
|
||||||
|
+ struct pwm_sifive_regs *pwm0, *pwm1;
|
||||||
|
+ pwm0 = (struct pwm_sifive_regs *)PWM0_BASE;
|
||||||
|
+ pwm1 = (struct pwm_sifive_regs *)PWM1_BASE;
|
||||||
|
+ writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp0);
|
||||||
|
+ /* Set the 3-color PWM LEDs to yellow in SPL */
|
||||||
|
+ writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp1);
|
||||||
|
+ writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp2);
|
||||||
|
+ writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp3);
|
||||||
|
+ writel(PWM_CFG_INIT, (void *)&pwm0->cfg);
|
||||||
|
+
|
||||||
|
+ writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp3);
|
||||||
|
+ /* Turn on all the fans, (J21), (J23) and (J24), on the unmatched board */
|
||||||
|
+ /* The SoC fan(J21) on the rev3 board cannot be controled by PWM_COMP0,
|
||||||
|
+ so here sets the initial value of PWM_COMP0 as DISABLE */
|
||||||
|
+ if (get_pcb_revision_from_eeprom() == PCB_REVISION_REV3)
|
||||||
|
+ writel(PWM_CMP_DISABLE_VAL, (void *)&pwm1->cmp1);
|
||||||
|
+ else
|
||||||
|
+ writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp1);
|
||||||
|
+ writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp2);
|
||||||
|
+ writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp3);
|
||||||
|
+ writel(PWM_CFG_INIT, (void *)&pwm1->cfg);
|
||||||
|
+}
|
||||||
|
diff --git a/board/sifive/unmatched/spl.c b/board/sifive/unmatched/spl.c
|
||||||
|
index 7c0beedc08..f3a661a81e 100644
|
||||||
|
--- a/board/sifive/unmatched/spl.c
|
||||||
|
+++ b/board/sifive/unmatched/spl.c
|
||||||
|
@@ -90,6 +90,8 @@ int spl_board_init_f(void)
|
||||||
|
goto end;
|
||||||
|
}
|
||||||
|
|
||||||
|
+ pwm_device_init();
|
||||||
|
+
|
||||||
|
ret = spl_gemgxl_init();
|
||||||
|
if (ret) {
|
||||||
|
debug("Gigabit ethernet PHY (VSC8541) init failed: %d\n", ret);
|
||||||
|
--
|
||||||
|
2.27.0
|
||||||
|
|
||||||
@ -0,0 +1,68 @@
|
|||||||
|
From 7ead6d662a2f9d8498af6650ea38418c64b52048 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Vincent Chen <vincent.chen@sifive.com>
|
||||||
|
Date: Mon, 24 Jan 2022 02:42:02 -0800
|
||||||
|
Subject: [PATCH 3/8] board: sifive: Set LED's color to purple in the U-boot
|
||||||
|
stage
|
||||||
|
|
||||||
|
Set LED's color to purple in the U-boot stage. Because there are still
|
||||||
|
some functions to be executed before board_early_init_f(), it means
|
||||||
|
the LED's is not changed to purple instantly when entering the U-boot
|
||||||
|
stage.
|
||||||
|
---
|
||||||
|
board/sifive/unmatched/pwm.c | 7 +++++++
|
||||||
|
board/sifive/unmatched/unmatched.c | 6 ++++++
|
||||||
|
configs/sifive_unmatched_defconfig | 1 +
|
||||||
|
3 files changed, 14 insertions(+)
|
||||||
|
|
||||||
|
diff --git a/board/sifive/unmatched/pwm.c b/board/sifive/unmatched/pwm.c
|
||||||
|
index e1cc02310a..bd67672c22 100644
|
||||||
|
--- a/board/sifive/unmatched/pwm.c
|
||||||
|
+++ b/board/sifive/unmatched/pwm.c
|
||||||
|
@@ -36,6 +36,7 @@ void pwm_device_init(void)
|
||||||
|
struct pwm_sifive_regs *pwm0, *pwm1;
|
||||||
|
pwm0 = (struct pwm_sifive_regs *)PWM0_BASE;
|
||||||
|
pwm1 = (struct pwm_sifive_regs *)PWM1_BASE;
|
||||||
|
+#ifdef CONFIG_SPL_BUILD
|
||||||
|
writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp0);
|
||||||
|
/* Set the 3-color PWM LEDs to yellow in SPL */
|
||||||
|
writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp1);
|
||||||
|
@@ -54,4 +55,10 @@ void pwm_device_init(void)
|
||||||
|
writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp2);
|
||||||
|
writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp3);
|
||||||
|
writel(PWM_CFG_INIT, (void *)&pwm1->cfg);
|
||||||
|
+#else
|
||||||
|
+ /* Set the 3-color PWM LEDs to purple in U-boot */
|
||||||
|
+ writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp1);
|
||||||
|
+ writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp2);
|
||||||
|
+ writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp3);
|
||||||
|
+#endif
|
||||||
|
}
|
||||||
|
diff --git a/board/sifive/unmatched/unmatched.c b/board/sifive/unmatched/unmatched.c
|
||||||
|
index 6295deeae2..30c082d001 100644
|
||||||
|
--- a/board/sifive/unmatched/unmatched.c
|
||||||
|
+++ b/board/sifive/unmatched/unmatched.c
|
||||||
|
@@ -22,6 +22,12 @@ void *board_fdt_blob_setup(int *err)
|
||||||
|
return (ulong *)&_end;
|
||||||
|
}
|
||||||
|
|
||||||
|
+int board_early_init_f(void)
|
||||||
|
+{
|
||||||
|
+ pwm_device_init();
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
int board_init(void)
|
||||||
|
{
|
||||||
|
/* enable all cache ways */
|
||||||
|
diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig
|
||||||
|
index d400ed0b23..0758f8e90f 100644
|
||||||
|
--- a/configs/sifive_unmatched_defconfig
|
||||||
|
+++ b/configs/sifive_unmatched_defconfig
|
||||||
|
@@ -51,3 +51,4 @@ CONFIG_DM_SCSI=y
|
||||||
|
CONFIG_USB=y
|
||||||
|
CONFIG_USB_XHCI_HCD=y
|
||||||
|
CONFIG_USB_XHCI_PCI=y
|
||||||
|
+CONFIG_BOARD_EARLY_INIT_F=y
|
||||||
|
--
|
||||||
|
2.27.0
|
||||||
|
|
||||||
@ -0,0 +1,30 @@
|
|||||||
|
From 6ef7023c0dcfde320015ab19e0e0d423921be77d Mon Sep 17 00:00:00 2001
|
||||||
|
From: Vincent Chen <vincent.chen@sifive.com>
|
||||||
|
Date: Mon, 15 Nov 2021 03:39:07 -0800
|
||||||
|
Subject: [PATCH 1/2] board: sifive: Set LED's color to blue before jumping to
|
||||||
|
Linux
|
||||||
|
|
||||||
|
The LED's color wil be changed from purple to blue before executing
|
||||||
|
the sysboot command. Because the sysboot command includes the image loading
|
||||||
|
from the boot partition, It means the LED's color is blue when executing
|
||||||
|
"Retrieving file: /Image.gz".
|
||||||
|
---
|
||||||
|
include/configs/sifive-unmatched.h | 7 ++++++-
|
||||||
|
1 file changed, 6 insertions(+), 1 deletion(-)
|
||||||
|
|
||||||
|
--- a/include/configs/sifive-unmatched.h
|
||||||
|
+++ b/include/configs/sifive-unmatched.h
|
||||||
|
@@ -49,7 +49,12 @@
|
||||||
|
"type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \
|
||||||
|
"partitions=" PARTS_DEFAULT "\0" \
|
||||||
|
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
||||||
|
- BOOTENV
|
||||||
|
+ "setled_blue=mw.l 0x10020024 0x0000ffff; mw.l 0x10020028 0x0000ffff; mw.l 0x1002002c 0x0\0" \
|
||||||
|
+ BOOTENV \
|
||||||
|
+ "boot_extlinux=" \
|
||||||
|
+ "run setled_blue; " \
|
||||||
|
+ "sysboot ${devtype} ${devnum}:${distro_bootpart} any " \
|
||||||
|
+ "${scriptaddr} ${prefix}${boot_syslinux_conf};\0"
|
||||||
|
|
||||||
|
#define CONFIG_SYS_EEPROM_BUS_NUM 0
|
||||||
|
|
||||||
@ -0,0 +1,111 @@
|
|||||||
|
From 07f84ed283b913cbdf87181ae2ed65467d923df5 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Vincent Chen <vincent.chen@sifive.com>
|
||||||
|
Date: Mon, 24 Jan 2022 02:57:40 -0800
|
||||||
|
Subject: [PATCH 2/2] board: sifive: spl: Set remote thermal of TMP451 to 85
|
||||||
|
deg C for the unmatched board
|
||||||
|
|
||||||
|
For TMP451 on the unmatched board, the default value of the remote
|
||||||
|
thermal threshold is 108 deg C. This commit initilizes it to 85 deg C at SPL.
|
||||||
|
---
|
||||||
|
board/sifive/unmatched/spl.c | 29 +++++++++++++++++++++++++++++
|
||||||
|
drivers/misc/Kconfig | 10 ++++++++++
|
||||||
|
include/configs/sifive-unmatched.h | 4 ++++
|
||||||
|
scripts/config_whitelist.txt | 1 +
|
||||||
|
4 files changed, 44 insertions(+)
|
||||||
|
|
||||||
|
--- a/board/sifive/unmatched/spl.c
|
||||||
|
+++ b/board/sifive/unmatched/spl.c
|
||||||
|
@@ -10,6 +10,8 @@
|
||||||
|
#include <spl.h>
|
||||||
|
#include <misc.h>
|
||||||
|
#include <log.h>
|
||||||
|
+#include <config.h>
|
||||||
|
+#include <i2c.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
#include <linux/io.h>
|
||||||
|
#include <asm/gpio.h>
|
||||||
|
@@ -26,6 +28,27 @@
|
||||||
|
#define MODE_SELECT_SD 0xb
|
||||||
|
#define MODE_SELECT_MASK GENMASK(3, 0)
|
||||||
|
|
||||||
|
+#define TMP451_REMOTE_THERM_LIMIT_REG_OFFSET 0x19
|
||||||
|
+#define TMP451_REMOTE_THERM_LIMIT_INIT_VALUE 0x55
|
||||||
|
+
|
||||||
|
+static inline int init_tmp451_remote_therm_limit(void)
|
||||||
|
+{
|
||||||
|
+ struct udevice *dev;
|
||||||
|
+ unsigned char r_therm_limit = TMP451_REMOTE_THERM_LIMIT_INIT_VALUE;
|
||||||
|
+ int ret;
|
||||||
|
+
|
||||||
|
+ ret = i2c_get_chip_for_busnum(CONFIG_SYS_TMP451_BUS_NUM,
|
||||||
|
+ CONFIG_SYS_I2C_TMP451_ADDR,
|
||||||
|
+ CONFIG_SYS_I2C_TMP451_ADDR_LEN,
|
||||||
|
+ &dev);
|
||||||
|
+
|
||||||
|
+ if (!ret)
|
||||||
|
+ ret = dm_i2c_write(dev, TMP451_REMOTE_THERM_LIMIT_REG_OFFSET,
|
||||||
|
+ &r_therm_limit,
|
||||||
|
+ sizeof(unsigned char));
|
||||||
|
+ return ret;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
static inline int spl_reset_device_by_gpio(const char *label, int pin, int low_width)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
@@ -92,6 +115,12 @@ int spl_board_init_f(void)
|
||||||
|
|
||||||
|
pwm_device_init();
|
||||||
|
|
||||||
|
+ ret = init_tmp451_remote_therm_limit();
|
||||||
|
+ if (ret) {
|
||||||
|
+ debug("TMP451 remote THERM limit init failed: %d\n", ret);
|
||||||
|
+ goto end;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
ret = spl_gemgxl_init();
|
||||||
|
if (ret) {
|
||||||
|
debug("Gigabit ethernet PHY (VSC8541) init failed: %d\n", ret);
|
||||||
|
--- a/drivers/misc/Kconfig
|
||||||
|
+++ b/drivers/misc/Kconfig
|
||||||
|
@@ -536,8 +536,18 @@ config SYS_I2C_EEPROM_ADDR
|
||||||
|
depends on ID_EEPROM || I2C_EEPROM || SPL_I2C_EEPROM || CMD_EEPROM || ENV_IS_IN_EEPROM
|
||||||
|
default 0
|
||||||
|
|
||||||
|
+config SYS_I2C_TMP451_ADDR
|
||||||
|
+ hex "Chip address of the TMP451 device"
|
||||||
|
+ default 0
|
||||||
|
+
|
||||||
|
if I2C_EEPROM
|
||||||
|
|
||||||
|
+config SYS_I2C_TMP451_ADDR_LEN
|
||||||
|
+ int "Length in bytes of the TMP451 memory array address"
|
||||||
|
+ default 1
|
||||||
|
+ help
|
||||||
|
+ Note: This is NOT the chip address length!
|
||||||
|
+
|
||||||
|
config SYS_I2C_EEPROM_ADDR_OVERFLOW
|
||||||
|
hex "EEPROM Address Overflow"
|
||||||
|
default 0x0
|
||||||
|
--- a/include/configs/sifive-unmatched.h
|
||||||
|
+++ b/include/configs/sifive-unmatched.h
|
||||||
|
@@ -15,6 +15,10 @@
|
||||||
|
|
||||||
|
#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000
|
||||||
|
|
||||||
|
+#define CONFIG_SYS_TMP451_BUS_NUM 0
|
||||||
|
+#define CONFIG_SYS_I2C_TMP451_ADDR 0x4c
|
||||||
|
+#define CONFIG_SYS_I2C_TMP451_ADDR_LEN 0x1
|
||||||
|
+
|
||||||
|
/* Environment options */
|
||||||
|
|
||||||
|
#define BOOT_TARGET_DEVICES(func) \
|
||||||
|
--- a/scripts/config_whitelist.txt
|
||||||
|
+++ b/scripts/config_whitelist.txt
|
||||||
|
@@ -1268,6 +1268,7 @@ CONFIG_SYS_TIMER_BASE
|
||||||
|
CONFIG_SYS_TIMER_COUNTER
|
||||||
|
CONFIG_SYS_TIMER_COUNTS_DOWN
|
||||||
|
CONFIG_SYS_TIMER_RATE
|
||||||
|
+CONFIG_SYS_TMP451_BUS_NUM
|
||||||
|
CONFIG_SYS_TMPVIRT
|
||||||
|
CONFIG_SYS_TSEC1_OFFSET
|
||||||
|
CONFIG_SYS_TX_ETH_BUFFER
|
||||||
@ -0,0 +1,36 @@
|
|||||||
|
From c29e4d84cfa17ab96eff2a9044f486ba3c8b5c43 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Atish Patra <atish.patra@wdc.com>
|
||||||
|
Date: Mon, 25 Oct 2021 11:35:41 -0700
|
||||||
|
Subject: [PATCH] riscv: dts: Add few PMU events
|
||||||
|
|
||||||
|
fu740 has 2 HPM counters and many HPM events defined in the fu740 manual[1].
|
||||||
|
This patch adds some of these events and their mapping as per the
|
||||||
|
OpenSBI PMU DT binding for now.
|
||||||
|
|
||||||
|
[1]https://sifive.cdn.prismic.io/sifive/de1491e5-077c-461d-9605-e8a0ce57337d_fu740-c000-manual-v1p3.pdf
|
||||||
|
|
||||||
|
Signed-off-by: Atish Patra <atish.patra@wdc.com>
|
||||||
|
---
|
||||||
|
arch/riscv/dts/fu740-c000.dtsi | 11 +++++++++++
|
||||||
|
1 file changed, 11 insertions(+)
|
||||||
|
|
||||||
|
--- a/arch/riscv/dts/fu740-c000.dtsi
|
||||||
|
+++ b/arch/riscv/dts/fu740-c000.dtsi
|
||||||
|
@@ -140,6 +140,17 @@
|
||||||
|
#size-cells = <2>;
|
||||||
|
compatible = "simple-bus";
|
||||||
|
ranges;
|
||||||
|
+ pmu {
|
||||||
|
+ compatible = "riscv,pmu";
|
||||||
|
+ riscv,raw-event-to-mhpmcounters = <0x00000000 0x200 0x18
|
||||||
|
+ 0x00000000 0x400 0x18
|
||||||
|
+ 0x00000000 0x800 0x18>;
|
||||||
|
+ riscv,event-to-mhpmcounters = <0x05 0x06 0x18
|
||||||
|
+ 0x10009 0x10009 0x18>;
|
||||||
|
+ riscv,event-to-mhpmevent = <0x05 0x00000000 0x4000
|
||||||
|
+ 0x06 0x00000000 0x4001
|
||||||
|
+ 0x10008 0x00000000 0x102>;
|
||||||
|
+ };
|
||||||
|
plic0: interrupt-controller@c000000 {
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
#address-cells = <0>;
|
||||||
@ -0,0 +1,50 @@
|
|||||||
|
commit 1dde977518f13824b847e23275001191139bc384
|
||||||
|
Author: Alexandre Ghiti <alexandre.ghiti@canonical.com>
|
||||||
|
Date: Mon Oct 3 18:07:54 2022 +0200
|
||||||
|
|
||||||
|
riscv: Fix build against binutils 2.38
|
||||||
|
|
||||||
|
The following description is copied from the equivalent patch for the
|
||||||
|
Linux Kernel proposed by Aurelien Jarno:
|
||||||
|
|
||||||
|
>From version 2.38, binutils default to ISA spec version 20191213. This
|
||||||
|
means that the csr read/write (csrr*/csrw*) instructions and fence.i
|
||||||
|
instruction has separated from the `I` extension, become two standalone
|
||||||
|
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
|
||||||
|
this causes the following build failure:
|
||||||
|
|
||||||
|
arch/riscv/cpu/mtrap.S: Assembler messages:
|
||||||
|
arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause'
|
||||||
|
arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc'
|
||||||
|
arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval'
|
||||||
|
arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0'
|
||||||
|
|
||||||
|
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
|
||||||
|
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
||||||
|
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
||||||
|
Tested-by: Heiko Stuebner <heiko@sntech.de>
|
||||||
|
Tested-by: Christian Stewart <christian@paral.in>
|
||||||
|
Reviewed-by: Rick Chen <rick@andestech.com>
|
||||||
|
|
||||||
|
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
|
||||||
|
index 0b80eb8d86..53d1194ffb 100644
|
||||||
|
--- a/arch/riscv/Makefile
|
||||||
|
+++ b/arch/riscv/Makefile
|
||||||
|
@@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y)
|
||||||
|
CMODEL = medany
|
||||||
|
endif
|
||||||
|
|
||||||
|
-ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \
|
||||||
|
+RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
|
||||||
|
+
|
||||||
|
+# Newer binutils versions default to ISA spec version 20191213 which moves some
|
||||||
|
+# instructions from the I extension to the Zicsr and Zifencei extensions.
|
||||||
|
+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei)
|
||||||
|
+ifeq ($(toolchain-need-zicsr-zifencei),y)
|
||||||
|
+ RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei
|
||||||
|
+endif
|
||||||
|
+
|
||||||
|
+ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
|
||||||
|
-mcmodel=$(CMODEL)
|
||||||
|
|
||||||
|
PLATFORM_CPPFLAGS += $(ARCH_FLAGS)
|
||||||
@ -0,0 +1,35 @@
|
|||||||
|
From 637800493945ffed2f454756300437a4ec86e3b1 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Hauke Mehrtens <hauke@hauke-m.de>
|
||||||
|
Date: Wed, 19 Jul 2017 22:23:15 +0200
|
||||||
|
Subject: mkimage: check environment for dtc binary location
|
||||||
|
|
||||||
|
Currently mkimage assumes the dtc binary is in the path and fails
|
||||||
|
otherwise. This patch makes it check the DTC environment variable first
|
||||||
|
for the dtc binary and then fall back to the default path. This makes
|
||||||
|
it possible to call the u-boot build with make DTC=... and build a fit
|
||||||
|
image with the dtc binary not being the the default path.
|
||||||
|
|
||||||
|
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
||||||
|
Cc: Simon Glass <sjg@chromium.org>
|
||||||
|
---
|
||||||
|
tools/fit_image.c | 7 ++++++-
|
||||||
|
1 file changed, 6 insertions(+), 1 deletion(-)
|
||||||
|
|
||||||
|
--- a/tools/fit_image.c
|
||||||
|
+++ b/tools/fit_image.c
|
||||||
|
@@ -726,9 +726,14 @@ static int fit_handle_file(struct image_
|
||||||
|
}
|
||||||
|
*cmd = '\0';
|
||||||
|
} else if (params->datafile) {
|
||||||
|
+ const char* dtc = getenv("DTC");
|
||||||
|
+
|
||||||
|
+ if (!dtc)
|
||||||
|
+ dtc = MKIMAGE_DTC;
|
||||||
|
+
|
||||||
|
/* dtc -I dts -O dtb -p 500 -o tmpfile datafile */
|
||||||
|
snprintf(cmd, sizeof(cmd), "%s %s -o \"%s\" \"%s\"",
|
||||||
|
- MKIMAGE_DTC, params->dtc, tmpfile, params->datafile);
|
||||||
|
+ dtc, params->dtc, tmpfile, params->datafile);
|
||||||
|
debug("Trying to execute \"%s\"\n", cmd);
|
||||||
|
} else {
|
||||||
|
snprintf(cmd, sizeof(cmd), "cp \"%s\" \"%s\"",
|
||||||
10
package/boot/uboot-sifiveu/patches/110-no-kwbimage.patch
Normal file
10
package/boot/uboot-sifiveu/patches/110-no-kwbimage.patch
Normal file
@ -0,0 +1,10 @@
|
|||||||
|
--- a/tools/Makefile
|
||||||
|
+++ b/tools/Makefile
|
||||||
|
@@ -119,7 +119,6 @@ dumpimage-mkimage-objs := aisimage.o \
|
||||||
|
imximage.o \
|
||||||
|
imx8image.o \
|
||||||
|
imx8mimage.o \
|
||||||
|
- kwbimage.o \
|
||||||
|
lib/md5.o \
|
||||||
|
lpc32xximage.o \
|
||||||
|
mxsimage.o \
|
||||||
@ -0,0 +1,24 @@
|
|||||||
|
--- a/tools/image-host.c
|
||||||
|
+++ b/tools/image-host.c
|
||||||
|
@@ -1125,6 +1125,7 @@ static int fit_config_add_verification_d
|
||||||
|
* 2) get public key (X509_get_pubkey)
|
||||||
|
* 3) provide der format (d2i_RSAPublicKey)
|
||||||
|
*/
|
||||||
|
+#ifdef CONFIG_TOOLS_LIBCRYPTO
|
||||||
|
static int read_pub_key(const char *keydir, const void *name,
|
||||||
|
unsigned char **pubkey, int *pubkey_len)
|
||||||
|
{
|
||||||
|
@@ -1178,6 +1179,13 @@ err_cert:
|
||||||
|
fclose(f);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
+#else
|
||||||
|
+static int read_pub_key(const char *keydir, const void *name,
|
||||||
|
+ unsigned char **pubkey, int *pubkey_len)
|
||||||
|
+{
|
||||||
|
+ return -ENOSYS;
|
||||||
|
+}
|
||||||
|
+#endif
|
||||||
|
|
||||||
|
int fit_pre_load_data(const char *keydir, void *keydest, void *fit)
|
||||||
|
{
|
||||||
@ -0,0 +1,30 @@
|
|||||||
|
--- a/Makefile
|
||||||
|
+++ b/Makefile
|
||||||
|
@@ -2028,26 +2028,7 @@ endif
|
||||||
|
# Check dtc and pylibfdt, if DTC is provided, else build them
|
||||||
|
PHONY += scripts_dtc
|
||||||
|
scripts_dtc: scripts_basic
|
||||||
|
- $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
|
||||||
|
- $(MAKE) $(build)=scripts/dtc; \
|
||||||
|
- else \
|
||||||
|
- if ! $(DTC) -v >/dev/null; then \
|
||||||
|
- echo '*** Failed to check dtc version: $(DTC)'; \
|
||||||
|
- false; \
|
||||||
|
- else \
|
||||||
|
- if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
|
||||||
|
- echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
|
||||||
|
- false; \
|
||||||
|
- else \
|
||||||
|
- if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
|
||||||
|
- if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
|
||||||
|
- echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
|
||||||
|
- false; \
|
||||||
|
- fi; \
|
||||||
|
- fi; \
|
||||||
|
- fi; \
|
||||||
|
- fi; \
|
||||||
|
- fi
|
||||||
|
+ $(MAKE) $(build)=scripts/dtc
|
||||||
|
|
||||||
|
# ---------------------------------------------------------------------------
|
||||||
|
quiet_cmd_cpp_lds = LDS $@
|
||||||
5
package/boot/uboot-sifiveu/uEnv-default.txt
Normal file
5
package/boot/uboot-sifiveu/uEnv-default.txt
Normal file
@ -0,0 +1,5 @@
|
|||||||
|
setenv loadkernel fatload mmc 0:3 \$kernel_addr_r Image
|
||||||
|
setenv loaddtb fatload mmc 0:3 \$fdt_addr_r dtb
|
||||||
|
setenv bootargs console=ttySIF0,115200 earlycon=sbi root=/dev/mmcblk0p4 rootwait
|
||||||
|
setenv uenvcmd run loadkernel \&\& run loaddtb \&\& booti \$kernel_addr_r - \$fdt_addr_r
|
||||||
|
run uenvcmd
|
||||||
Loading…
Reference in New Issue
Block a user