Revert "gpio-cdev: add nu801 userspace driver"

This reverts commit f536f5ebdd.

As Hauke commented, this causes builder failures on 5.4 kernels.
This revert includes changes to the mx100 kernel modules
dependency as well as the uci led definitions.

Tested-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

package/system/gpio-cdev/nu801/Makefile

@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=nu801
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/chunkeey/nu801.git
-PKG_SOURCE_VERSION:=794a588fce3150129bb2e5bb37590c7daceb8927
-
-PKG_MAINTAINER:=Christian Lamparter <chunkeey@gmail.com>
-PKG_LICENSE:=GPL-3.0-or-later
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/nu801
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Userspace GPIO Drivers
-  DEPENDS:=@!LINUX_5_4 +kmod-leds-uleds
-  KCONFIG:= \
-    CONFIG_GPIO_CDEV=y
-  TITLE:=NU801 LED Driver
-endef
-
-define Package/nu801/description
-This package contains a userspace driver to power the NUMEN Tech. NU801 LED Driver.
-endef
-
-define Package/nu801/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/nu801 $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/nu801.init $(1)/etc/init.d/nu801
-
-endef
-
-$(eval $(call BuildPackage,nu801))

package/system/gpio-cdev/nu801/files/nu801.init

@@ -1,15 +0,0 @@
-#!/bin/sh /etc/rc.common
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-START=15
-STOP=94
-USE_PROCD=1
-
-start_service() {
-	. /lib/functions.sh
-
-	procd_open_instance
-	procd_set_param command /usr/sbin/nu801 "$(board_name)"
-	procd_set_param respawn 5 1 5
-	procd_close_instance
-}

target/linux/x86/base-files/etc/board.d/01_leds

@@ -9,7 +9,7 @@ board_config_update
 case "$(board_name)" in
 cisco-mx100-hw)
 	ucidef_set_led_usbport "usb" "USB" "mx100:green:usb" "1-1-port2"
-	ucidef_set_led_default "diag" "DIAG" "mx100:green:tricolor" "1"
+	ucidef_set_led_default "diag" "DIAG" "mx100:green:ha" "1"
 	;;
 pc-engines-apu1|pc-engines-apu2|pc-engines-apu3)
 	ucidef_set_led_netdev "wan" "WAN" "apu:green:3" "eth0"

target/linux/x86/modules.mk

@@ -88,7 +88,7 @@ define KernelPackage/meraki-mx100
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Cisco Meraki MX100 Platform Driver
   DEPENDS:=@TARGET_x86 @!LINUX_5_4 +kmod-tg3 +kmod-gpio-button-hotplug +kmod-leds-gpio \
-    +kmod-usb-ledtrig-usbport +nu801 +kmod-itco-wdt
+    +kmod-usb-ledtrig-usbport +kmod-itco-wdt
   KCONFIG:=CONFIG_MERAKI_MX100
   FILES:=$(LINUX_DIR)/drivers/platform/x86/meraki-mx100.ko
   AUTOLOAD:=$(call AutoLoad,60,meraki-mx100,1)