airoha: an7583: Add missing DTS for EMMC RFB board

While adding support for Airoha AN7583, it was forget to push the EMMC
DTS while defining the variant in the image Makefile.

Add the missing DTS to fix image creation error.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

target/linux/airoha/dts/an7583-evb-emmc.dts

@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "an7583.dtsi"
+
+/ {
+	model = "Airoha AN7583 Evaluation Board";
+	compatible = "airoha,an7583-evb", "airoha,an7583", "airoha,en7583";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		btn-reset {
+			label = "reset";
+			linux,code = <BTN_0>;
+			gpios = <&an7583_pinctrl 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "pon";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&an7583_pinctrl 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			label = "internet";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&an7583_pinctrl 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			label = "wps";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&an7583_pinctrl 31 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			label = "los";
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&an7583_pinctrl 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			label = "voip_hook";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&an7583_pinctrl 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&an7583_pinctrl {
+	gpio-ranges = <&an7583_pinctrl 0 2 53>;
+
+	mdio0_pins: mdio0-pins {
+		conf {
+			pins = "mdio_0";
+			output-high;
+		};
+	};
+
+	pcie0_rst_pins: pcie0-rst-pins {
+		conf {
+			pins = "pcie_reset0";
+			drive-open-drain = <1>;
+		};
+	};
+
+	pcie1_rst_pins: pcie1-rst-pins {
+		conf {
+			pins = "pcie_reset1";
+			drive-open-drain = <1>;
+		};
+	};
+
+	gswp1_led0_pins: gswp1-led0-pins {
+		mux {
+			function = "phy1_led0";
+			pins = "gpio1";
+		};
+	};
+
+	gswp2_led0_pins: gswp2-led0-pins {
+		mux {
+			function = "phy2_led0";
+			pins = "gpio2";
+		};
+	};
+
+	gswp3_led0_pins: gswp3-led0-pins {
+		mux {
+			function = "phy3_led0";
+			pins = "gpio3";
+		};
+	};
+
+	gswp4_led0_pins: gswp4-led0-pins {
+		mux {
+			function = "phy4_led0";
+			pins = "gpio4";
+		};
+	};
+
+	mmc_pins: mmc-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc";
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	card@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+
+		block {
+			compatible = "block-device";
+			partitions {
+				block-partition-factory {
+					partname = "art";
+
+					nvmem-layout {
+						compatible = "fixed-layout";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						eeprom_factory_0: eeprom@0 {
+							reg = <0x40000 0x1e00>;
+						};
+
+						mac_factory_2c0000: mac@2c0000 {
+							reg = <0x2c0000 0x6>;
+						};
+
+						pon_mac_factory_2c0006: pon_mac@2c0006 {
+							reg = <0x2c0006 0x6>;
+						};
+
+						onu_type_factory_2e0000: onu_type@2e0000 {
+							reg = <0x2e0000 0x10>;
+						};
+
+						board_config_factory_2e0010: board_config@2e0010 {
+							reg = <0x2e0010 0x8>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mdio_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_pins>;
+
+	en8811: ethernet-phy@f {
+		reg = <0xf>;
+
+		reset-gpios = <&an7583_pinctrl 28 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <20000>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				function = LED_FUNCTION_LAN;
+				color = <LED_COLOR_ID_GREEN>;
+				function-enumerator = <0>;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				function = LED_FUNCTION_LAN;
+				color = <LED_COLOR_ID_GREEN>;
+				function-enumerator = <1>;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+	nvmem-cells = <&mac_factory_2c0000>;
+	nvmem-cell-names = "mac";
+};
+
+&gdm1 {
+	status = "okay";
+};
+
+&gdm3 {
+	status = "okay";
+
+	phy-handle = <&en8811>;
+	phy-mode = "2500base-x";
+};
+
+&switch {
+	status = "okay";
+};
+
+&gsw_phy1 {
+	pinctrl-names = "gbe-led";
+	pinctrl-0 = <&gswp1_led0_pins>;
+	status = "okay";
+};
+
+&gsw_phy1_led0 {
+	status = "okay";
+	active-low;
+};
+
+&gsw_phy2 {
+	pinctrl-names = "gbe-led";
+	pinctrl-0 = <&gswp2_led0_pins>;
+	status = "okay";
+};
+
+&gsw_phy2_led0 {
+	status = "okay";
+	active-low;
+};
+
+&gsw_phy3 {
+	pinctrl-names = "gbe-led";
+	pinctrl-0 = <&gswp3_led0_pins>;
+	status = "okay";
+};
+
+&gsw_phy3_led0 {
+	status = "okay";
+	active-low;
+};
+
+&gsw_phy4 {
+	pinctrl-names = "gbe-led";
+	pinctrl-0 = <&gswp4_led0_pins>;
+	status = "okay";
+};
+
+&gsw_phy4_led0 {
+	status = "okay";
+	active-low;
+};