From 51108508f10eb25f99395ec9334f996813bc5a22 Mon Sep 17 00:00:00 2001 From: Michal Halva Date: Sat, 2 Aug 2025 20:46:14 +0200 Subject: [PATCH] mediatek: filogic: add support for Cudy WR3000P v1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hardware -------- MediaTek MT7981 WiSoC 512MB DDR4 RAM 128MB SPI-NAND MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) 4 LAN MediaTek MT7531 PHY 1 WAN RTL8221B-VB-CG 2.5Gbps PHY UART: 115200 8N1 3.3V USB2 Port PoE on WAN Port MAC: LAN MAC: label mac WAN MAC: label mac + 1 2.4G MAC: label mac 5G MAC: label mac + 1 with LA bit set Gotchas: WAN LED does not light up (might require further DTS tweaks) PoE on WAN port was not tested This commit is heavily based on WR3000H one, I've just ported DTS differences from the official image to get USB support and proper LED mapping. Installation ------------ [Untested as I've received and used a transitional image from Cudy] 1. Connect to the serial port as described in the "Hardware" section. 2. Power on the device + press reset pin. Keep pressing reset pin to enter the U-Boot shell. 3. Download the OpenWrt initramfs image. Place it on an TFTP server connected to the Cudy LAN ports. Make sure the server is reachable at 192.168.1.88. Rename the image to "cudy3000p.bin" 4. Download and boot the OpenWrt initramfs image. $ tftpboot 0x46000000 cudy3000s.bin; bootm 0x46000000 5. Transfer the OpenWrt sysupgrade image to the device using scp. Install with sysupgrade. Signed-off-by: Michal Halva Link: https://github.com/openwrt/openwrt/pull/19636 (cherry picked from commit 04e9d154f209c0390d962c10e75ed3c49bd5a9e9) Signed-off-by: Thibaut VARÈNE Link: https://github.com/openwrt/openwrt/pull/20830 Signed-off-by: Hauke Mehrtens --- .../mediatek/dts/mt7981b-cudy-wr3000p-v1.dts | 153 ++++++++++++++++++ .../filogic/base-files/etc/board.d/01_leds | 3 +- .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 1 + .../base-files/lib/upgrade/platform.sh | 3 +- target/linux/mediatek/image/filogic.mk | 17 ++ 5 files changed, 175 insertions(+), 2 deletions(-) create mode 100644 target/linux/mediatek/dts/mt7981b-cudy-wr3000p-v1.dts diff --git a/target/linux/mediatek/dts/mt7981b-cudy-wr3000p-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-wr3000p-v1.dts new file mode 100644 index 0000000000..0bee64d7b8 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cudy-wr3000p-v1.dts @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "mt7981b-cudy-wr3000-nand.dtsi" + +/ { + model = "Cudy WR3000P v1"; + compatible = "cudy,wr3000p-v1", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + + led_status: led-status { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + + led-internet { + function = LED_FUNCTION_WAN_ONLINE; + color = ; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-wlan2g { + function = LED_FUNCTION_WLAN_2GHZ; + color = ; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-wlan5g { + function = LED_FUNCTION_WLAN_5GHZ; + color = ; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led-wan { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + led-usb { + function = LED_FUNCTION_USB; + color = ; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + usb_vbus: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; +}; + +ð { + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy6>; + phy-mode = "2500base-x"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_bdinfo_de00 1>; + label = "wan"; + }; +}; + +&mdio_bus { + phy6: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 3 GPIO_ACTIVE_LOW>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&xhci { + vusb33-supply = <®_3p3v>; + vbus-supply = <&usb_vbus>; + mediatek,u3p-dis-msk = <0x01>; + phys = <&u2port0 PHY_TYPE_USB2>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 217f495f95..950dcf7143 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -42,7 +42,8 @@ wavlink,wl-wn573hx3) cudy,wr3000-v1) ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" ;; -cudy,wr3000h-v1) +cudy,wr3000h-v1|\ +cudy,wr3000p-v1) ucidef_set_led_netdev "lan1" "lan1" "white:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan2" "lan2" "white:lan-2" "lan2" "link tx rx" ucidef_set_led_netdev "lan3" "lan3" "white:lan-3" "lan3" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 58672d9d72..fe98657a1a 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -84,6 +84,7 @@ case "$board" in cudy,wr3000e-v1|\ cudy,wr3000s-v1|\ cudy,wr3000h-v1|\ + cudy,wr3000p-v1|\ cudy,wr3000-v1) addr=$(mtd_get_mac_binary bdinfo 0xde00) # Originally, phy0 is phy1 mac with LA bit set. However, this would conflict diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index bd66551198..3cc8b91b74 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -127,7 +127,8 @@ platform_do_upgrade() { CI_KERNPART="linux" nand_do_upgrade "$1" ;; - cudy,wr3000h-v1) + cudy,wr3000h-v1|\ + cudy,wr3000p-v1) CI_UBIPART="ubi" nand_do_upgrade "$1" ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 2cf44bee14..17289675a6 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -856,6 +856,23 @@ define Device/cudy_wr3000h-v1 endef TARGET_DEVICES += cudy_wr3000h-v1 +define Device/cudy_wr3000p-v1 + DEVICE_VENDOR := Cudy + DEVICE_MODEL := WR3000P + DEVICE_VARIANT := v1 + DEVICE_DTS := mt7981b-cudy-wr3000p-v1 + DEVICE_DTS_DIR := ../dts + SUPPORTED_DEVICES += R57 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + KERNEL_IN_UBI := 1 + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware +endef +TARGET_DEVICES += cudy_wr3000p-v1 + define Device/dlink_aquila-pro-ai-m30-a1 DEVICE_VENDOR := D-Link DEVICE_MODEL := AQUILA PRO AI M30