mirror of
git://git.openwrt.org/openwrt/openwrt.git
synced 2025-11-03 22:44:27 -05:00
mpc85xx: add support for Enterasys WS-AP3710i
Hardware
--------
SoC: NXP P1020 (2x e500 @ 800MHz)
RAM: 256M DDR3 (Micron)
FLASH: 32M NOR (Spansion S29GL128S)
BTN: 1x Reset
WiFi: 1x Atheros AR9590 2.4 bgn 3x3
2x Atheros AR9590 5.0 an 3x3
ETH: 1x Gigabit Ethernet (Atheros AR8033)
LED: System (green/red) - Radio{0,1} (green)
LAN (connected to PHY)
- GE blue
- FE green
Serial is a Cisco-compatible RJ45 next to the ethernet port.
115200-N-8 are the settings for OS and U-Boot.
Installation
------------
1. Grab the OpenWrt initramfs, rename it to 01C8A8C0.img. Place it in
the root directory of a TFTP server and serve it at
192.168.200.200/24.
2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
by pressing Enter when prompted. Credentials are identical to the one
in the APs interface. By default it is admin / new2day.
3. Set the bootcmd so the AP can boot OpenWrt by executing
$ setenv boot_openwrt "setenv bootargs;
cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
If you plan on going back to the vendor firmware - the bootcmd for it
is stored in the boot_flash variable.
4. Load the initramfs image to RAM and boot by executing
$ tftpboot 0x1000000 192.168.200.200:01C8A8C0.img; bootm
5. Make a backup of the "firmware" partition if you ever wish to go back
to the vendor firmware.
6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp
folder.
7. Flash OpenWrt using sysupgrade.
$ sysupgrade -n /tmp/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
parent
1b7199c90c
commit
16b01fb1b9
@ -12,6 +12,9 @@ PHYNBR=${DEVPATH##*/phy}
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
enterasys,ws-ap3710i)
|
||||
echo $(mtd_get_mac_ascii cfg2 RADIOADDR${PHYNBR}) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
ocedo,panda)
|
||||
WMAC=wmac$(($PHYNBR + 1))
|
||||
MAC=$(mtd_get_mac_ascii uboot-env0 ${WMAC})
|
||||
|
||||
@ -318,6 +318,7 @@ CONFIG_VDSO32=y
|
||||
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_WS_AP3710I is not set
|
||||
# CONFIG_XES_MPC85xx is not set
|
||||
# CONFIG_XPS_USB_HCD_XILINX is not set
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
|
||||
172
target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts
Normal file
172
target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts
Normal file
@ -0,0 +1,172 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later or MIT
|
||||
|
||||
/include/ "fsl/p1020si-pre.dtsi"
|
||||
/ {
|
||||
model = "Enterasys WS-AP3710i";
|
||||
compatible = "enterasys,ws-ap3710i";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_red;
|
||||
label-mac-device = &enet0;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wifi1 {
|
||||
gpios = <&gpio0 3 0>;
|
||||
label = "ws-ap3710i:green:radio1";
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wifi2 {
|
||||
gpios = <&gpio0 4 0>;
|
||||
label = "ws-ap3710i:green:radio2";
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
led_power_green: power_green {
|
||||
gpios = <&gpio0 8 0>;
|
||||
label = "ws-ap3710i:green:power";
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
gpios = <&gpio0 9 0>;
|
||||
label = "ws-ap3710i:red:power";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
gpios = <&gpio0 1 1>; /* active low */
|
||||
linux,code = <0x198>; /* KEY_RESTART */
|
||||
};
|
||||
};
|
||||
|
||||
lbc: localbus@ffe05000 {
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
ranges = <0x0 0x0 0x0 0xee000000 0x2000000>;
|
||||
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x2000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
compatible = "denx,fit";
|
||||
reg = <0x0 0x1d80000>;
|
||||
label = "firmware";
|
||||
};
|
||||
|
||||
partition@1d80000 {
|
||||
reg = <0x1d80000 0x80000>;
|
||||
label = "u-boot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1e00000 {
|
||||
reg = <0x1e00000 0x100000>;
|
||||
label = "nvram";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f00000 {
|
||||
reg = <0x1f00000 0x20000>;
|
||||
label = "cfg2";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1f20000 {
|
||||
reg = <0x1f20000 0x20000>;
|
||||
label = "cfg1";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
gpio0: gpio-controller@fc00 {
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <0x4>;
|
||||
reset-gpios = <&gpio0 2 1>;
|
||||
};
|
||||
};
|
||||
|
||||
enet0: ethernet@b0000 {
|
||||
phy-connection-type = "rgmii-id";
|
||||
phy-handle = <&phy4>;
|
||||
};
|
||||
|
||||
enet1: ethernet@b1000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet2: ethernet@b2000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@23000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
/include/ "fsl/p1020si-post.dtsi"
|
||||
@ -0,0 +1,91 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
/*
|
||||
* Enterasys WS-AP3710i Board Setup
|
||||
*
|
||||
* Copyright (C) 2019 David Bauer <mail@david-bauer.net>
|
||||
*
|
||||
* Based on:
|
||||
* mpc85xx_rdb.c:
|
||||
* MPC85xx RDB Board Setup
|
||||
* Copyright 2013 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/stddef.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <mm/mmu_decl.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
#include "smp.h"
|
||||
|
||||
#include "mpc85xx.h"
|
||||
|
||||
void __init ws_ap3710i_pic_init(void)
|
||||
{
|
||||
struct mpic *mpic;
|
||||
|
||||
mpic = mpic_alloc(NULL, 0,
|
||||
MPIC_BIG_ENDIAN |
|
||||
MPIC_SINGLE_DEST_CPU,
|
||||
0, 256, " OpenPIC ");
|
||||
|
||||
BUG_ON(mpic == NULL);
|
||||
mpic_init(mpic);
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
static void __init ws_ap3710i_setup_arch(void)
|
||||
{
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("ws_ap3710i_setup_arch()", 0);
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
pr_info("WS-AP3710i board from Enterasys\n");
|
||||
}
|
||||
|
||||
machine_arch_initcall(ws_ap3710i, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init ws_ap3710i_probe(void)
|
||||
{
|
||||
if (of_machine_is_compatible("enterasys,ws-ap3710i"))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(ws_ap3710i) {
|
||||
.name = "P1020 RDB",
|
||||
.probe = ws_ap3710i_probe,
|
||||
.setup_arch = ws_ap3710i_setup_arch,
|
||||
.init_IRQ = ws_ap3710i_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
|
||||
#endif
|
||||
.get_irq = mpic_get_irq,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
@ -102,6 +102,16 @@ define Device/aerohive_hiveap-330
|
||||
endef
|
||||
TARGET_DEVICES += aerohive_hiveap-330
|
||||
|
||||
define Device/enterasys_ws-ap3710i
|
||||
DEVICE_VENDOR := Enterasys
|
||||
DEVICE_MODEL := WS-AP3710i
|
||||
BLOCKSIZE := 128k
|
||||
KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += enterasys_ws-ap3710i
|
||||
|
||||
define Device/ocedo_panda
|
||||
DEVICE_VENDOR := OCEDO
|
||||
DEVICE_MODEL := Panda
|
||||
|
||||
@ -23,6 +23,8 @@ CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_FSL_ELBC=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_SPLIT_FIT_FW=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
@ -51,4 +53,5 @@ CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_FS_LZO=y
|
||||
CONFIG_UBIFS_FS_ZLIB=y
|
||||
CONFIG_WS_AP3710I=y
|
||||
CONFIG_XPS=y
|
||||
|
||||
@ -0,0 +1,30 @@
|
||||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -71,6 +71,17 @@ config PANDA
|
||||
This board is a Concurrent Dual-Band wireless access point with a
|
||||
Freescale P1020 SoC.
|
||||
|
||||
+config WS_AP3710I
|
||||
+ bool "Enterasys WS-AP3710i"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the Enterasys WS-AP3710i board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless access point with a
|
||||
+ Freescale P1020 SoC.
|
||||
+
|
||||
config MPC8540_ADS
|
||||
bool "Freescale MPC8540 ADS"
|
||||
select DEFAULT_UIMAGE
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
|
||||
obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
obj-$(CONFIG_PANDA) += panda.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
+obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
|
||||
obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
|
||||
Loading…
Reference in New Issue
Block a user