\documentclass{article}
\usepackage{graphicx}
\usepackage[T1]{fontenc}
\usepackage{framed}
\usepackage{longtable,booktabs,array}

\title{Lab 1}
\author{Martin Kennedy}

\begin{document}
\maketitle

\section{Introduction}
Unlike DC signals, AC signals are time-varying, posing unique
challenges to recording, characterizing and otherwise studying them.

In this lab, we will focus on comparing the measurement of one aspect
of an AC signal -- the RMS voltage -- as seen by two tools: the
Digital Multimeter (DMM), and the oscillscope. We will also use
numerical and analytical methods to model this circuit and derive
expected RMS values for comparison.

\section{Analytic Modeling Results}
\section{Numerical Modeling Results}
\section{Experimental Results}
\section{Data Comparison}
\section{Conclusions}

\begin{longtable}[]{@{}lllllllll@{}}
\toprule
\endhead
\bottomrule
\endlastfoot
Set Mag. & Set Freq. & Read Mag. & Read Period & Calc. Freq. & Calc. RMS & Meas. RMS \\
2V       & 100 Hz    & 2.10 V    & 9.994  ms   & XXXXXHz     & .....V    & 1.4236 V  \\
2V       & 50 kHz    & 2.05 V    & 19.947 us   & a           & d         & 1.4112 V  \\
5V       & 100 Hz    & 5.11 V    & 10.007 ms   & b           & e         & 3.5522 V  \\
5V       & 50 kHz    & 5.11 V    & 20.005 us   & c           & f         & 3.5451 V  \\
\end{longtable}


\end{document}