mirror of
https://github.com/doppelhub/Honda_Insight_LiBCM.git
synced 2026-06-10 23:47:28 -04:00
17 lines
596 B
Plaintext
17 lines
596 B
Plaintext
The wire hole for Bay 1 fan cuts through ground plane.
|
|
|
|
C27 silkscreen covered by other silkscreen
|
|
|
|
isoSPI too close to off-line HVDC- (pre-filtered).
|
|
|
|
isoSPI should have ground plane underneath it to prevent EMI
|
|
|
|
If possible, rotate bay 3 fan's wire hole for better wire routing on back of PCB.
|
|
|
|
Reroute HVDC so that pack voltage goes through fuse, then cap, then HVDCDC.
|
|
|
|
HVDC 8pin screw terminal probably blocked by aluminum shaft that bolts from PDU to IMA battery.
|
|
|
|
Remove Redundant Neutral & GND Vias
|
|
|
|
Move HVDCDC inward 0.1" to prevent interference with enclosure. Same with cap and fuse. |